substitutions:
  name: boneio-dr-gen2-2rgbw-01
  friendly_name: "BoneIO Dimmer Gen2"
  serial_prefix: "dim2" #Don't change it.
  firmware_manifest: "https://boneio.eu/fwesp/boneio-dr-gen2-2rgbw-01.json"
esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"
  name_add_mac_suffix: true
  project:
    name: boneio.dimmer-led-gen2
    version: "0.1"
  on_boot:
    priority: -100
    then:
      - delay: 5s
      - if:
          condition:
            lambda: "return id(serial_no) != nullptr;"
          then:
            - component.update: serial_no
            - logger.log: "Serial No updated on boot"
          else:
            - logger.log: "Serial No component not found"

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

ethernet:
  id: eth
  type: W5500
  clk_pin: GPIO13
  mosi_pin: GPIO39
  miso_pin: GPIO38
  cs_pin: GPIO12
  interrupt_pin: GPIO2
  reset_pin: GPIO1
  clock_speed: 25MHz

i2c:
  sda: GPIO10
  scl: GPIO11
  scan: True
  frequency: 400kHz

output:
  - platform: ledc
    pin: GPIO18
    frequency: 1000Hz
    inverted: false
    id: chl01
  - platform: ledc
    pin: GPIO17
    frequency: 1000Hz
    inverted: false
    id: chl02
  - platform: ledc
    pin: GPIO16
    frequency: 1000Hz
    inverted: false
    id: chl03
  - platform: ledc
    pin: GPIO15
    frequency: 1000Hz
    inverted: false
    id: chl04

  - platform: ledc
    pin: GPIO7
    frequency: 1000Hz
    inverted: false
    id: chr01
  - platform: ledc
    pin: GPIO6
    frequency: 1000Hz
    inverted: false
    id: chr02
  - platform: ledc
    pin: GPIO5
    frequency: 1000Hz
    inverted: false
    id: chr03
  - platform: ledc
    pin: GPIO4
    frequency: 1000Hz
    inverted: false
    id: chr04

# CAN gpio48 - tx, gpio47 rx, gpio35 stb
uart:
  id: boneio_uart
  rx_pin: GPIO21
  tx_pin: GPIO14
  baud_rate: 9600
  stop_bits: 1
modbus:
  send_wait_time: 80ms
  uart_id: boneio_uart
  id: boneio_modbus

packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
    ref: packages-v2.0.0
    files: ["packages/devices/serial_no.yaml"]
  # boneiopackages:
  #   url: https://github.com/boneIO-eu/esphome_packages
  #   ref: main
  #   refresh: 1min
  #   files:
  #     - path: sdm630.yaml

dashboard_import:
  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_2rgbw-v0_1.yaml@main
  import_full_config: true

pcf8574:
  - id: "pcf_inputs"
    address: 0x38

logger:
  hardware_uart: UART0
api:
  reboot_timeout: 0s
ota:
  - platform: esphome
  - platform: web_server

web_server:
  port: 80
  version: 3
  local: true

light:
  - platform: rgbw
    id: rgbw_l
    name: "RGBW L"
    red: chl01
    green: chl02
    blue: chl03
    white: chl04
    default_transition_length: 2s
    gamma_correct: 0
  - platform: rgbw
    id: rgbw_r
    name: "RGBW R"
    red: chr01
    green: chr02
    blue: chr03
    white: chr04
    default_transition_length: 2s
    gamma_correct: 0

debug:
  update_interval: 15s

sensor:
  - platform: debug
    free:
      name: "Heap Free"
    block:
      name: "Heap Max Block"
    loop_time:
      name: "Loop Time"
  - platform: lm75b
    id: boneIO_temp
    name: "Temperature"
    update_interval: 30s
    entity_category: diagnostic
    on_value_range:
      - above: 70.0
        then:
          - switch.turn_on: buzzer
      - below: 70.0
        then:
          - switch.turn_off: buzzer

switch:
  - platform: gpio
    id: buzzer
    name: "Buzzer"
    pin:
      number: GPIO9
      mode:
        output: true
      inverted: false
  - platform: gpio
    id: can_bus_switch
    name: "CAN Bus Switch"
    pin:
      number: GPIO35
      mode:
        output: true
      inverted: false

binary_sensor:
  - platform: gpio
    name: "IN_01"
    id: in_01
    pin:
      pcf8574: pcf_inputs
      number: 0
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_02"
    id: in_02
    pin:
      pcf8574: pcf_inputs
      number: 1
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_03"
    id: in_03
    pin:
      pcf8574: pcf_inputs
      number: 2
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_04"
    id: in_04
    pin:
      pcf8574: pcf_inputs
      number: 3
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_05"
    id: in_05
    pin:
      pcf8574: pcf_inputs
      number: 4
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_06"
    id: in_06
    pin:
      pcf8574: pcf_inputs
      number: 5
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_07"
    id: in_07
    pin:
      pcf8574: pcf_inputs
      number: 6
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: "IN_08"
    id: in_08
    pin:
      pcf8574: pcf_inputs
      number: 7
      mode:
        input: true
      inverted: true