starred/esphome
1
0
Fork 0
mirror of https://github.com/boneIO-eu/esphome.git synced 2026-04-11 04:50:29 +02:00
Code Issues Packages Projects Releases 10 Wiki Activity

Merge pull request #38 from boneIO-eu/main

Browse Source 
Update for 8x10A
This commit is contained in:
Pawel
2025-11-30 11:05:51 +01:00
committed by GitHub
parent e792df95b0 349972f250
commit 0b6d9dc1b9
18 changed files with 2433 additions and 601 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
boneio-32x10_switches_v0_7.yaml
View File

@@ -10,6 +10,12 @@ esphome:
project: project:
name: boneio.32x10-lights name: boneio.32x10-lights
version: '0.7' version: '0.7'
on_boot:
- priority: 1001
then:
- lambda: |-
gpio_reset_pin((gpio_num_t)14);
gpio_reset_pin((gpio_num_t)15);
esp32: esp32:
board: nodemcu-32s board: nodemcu-32s
@@ -657,7 +663,11 @@ binary_sensor:
# UNCOMMENT BELOW TO USE MODBUS # UNCOMMENT BELOW TO USE MODBUS
# uart: # uart:
# id: uart_pin14_15 # id: uart_pin14_15
# rx_pin: GPIO14 # rx_pin:
# number: GPIO14
# mode:
# input: true
# pullup: true
# tx_pin: GPIO15 # tx_pin: GPIO15
# baud_rate: 9600 # baud_rate: 9600
# stop_bits: 1 # stop_bits: 1

282
boneio-8x10A_gen2_lights-v0_1.yaml Normal file
View File

@@ -0,0 +1,282 @@
substitutions:
name: boneio-8x10a-gen2-01
friendly_name: 'BoneIO 8x10A Gen2'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/fwesp/boneio-8x10a-gen2-01.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.8x10a-gen2
version: '0.1'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
output:
- platform: gpio
pin: GPIO18
inverted: false
id: out_01
- platform: gpio
pin: GPIO17
inverted: false
id: out_02
- platform: gpio
pin: GPIO16
inverted: false
id: out_03
- platform: gpio
pin: GPIO15
inverted: false
id: out_04
- platform: gpio
pin: GPIO7
inverted: false
id: out_05
- platform: gpio
pin: GPIO6
inverted: false
id: out_06
- platform: gpio
pin: GPIO5
inverted: false
id: out_07
- platform: gpio
pin: GPIO4
inverted: false
id: out_08
# CAN gpio48 - tx, gpio47 rx, gpio35 stb
# uart:
# id: boneio_uart
# rx_pin: GPIO21
# tx_pin: GPIO14
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 80ms
# uart_id: boneio_uart
# id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
]
# boneiopackages:
# url: https://github.com/boneIO-eu/esphome_packages
# ref: main
# refresh: 1min
# files:
# - path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-8x10A_gen2-v0_1.yaml@latest
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
version: 3
local: true
light:
- platform: binary
output: out_01
name: 'OUT 01'
id: light_01
- platform: binary
output: out_02
name: 'OUT 02'
id: light_02
- platform: binary
output: out_03
name: 'OUT 03'
id: light_03
- platform: binary
output: out_04
name: 'OUT 04'
id: light_04
- platform: binary
output: out_05
name: 'OUT 05'
id: light_05
- platform: binary
output: out_06
name: 'OUT 06'
id: light_06
- platform: binary
output: out_07
name: 'OUT 07'
id: light_07
- platform: binary
output: out_08
name: 'OUT 08'
id: light_08
debug:
update_interval: 15s
sensor:
- platform: lm75b
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: 'CAN Bus Switch'
pin:
number: GPIO35
mode:
output: true
inverted: false
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true

213
boneio-8x10A_v0_1.yaml
View File

@@ -1,213 +0,0 @@
substitutions:
name: boneio-8-s-01
friendly_name: 'BoneIO ESP 8x10A Switches'
serial_prefix: 'espm' #Don't change it.
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.8_10-switches
version: '0.1'
esp32:
board: esp32dev
framework:
type: esp-idf
ethernet:
id: eth
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk:
pin: GPIO0
mode: CLK_EXT_IN
phy_addr: 1
power_pin: GPIO16
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-8x10A_v0_1.yaml@latest
import_full_config: true
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files:
[
'devices/buzzer.yaml',
'devices/serial_no.yaml',
'devices/dimmer_i2c.yaml',
'devices_v0_7-v0_9/lm75b.yaml',
]
logger:
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
local: true
time:
- platform: homeassistant
timezone: Europe/Warsaw
id: homeassistant_time
mcp23017:
- id: 'mcp1'
address: 0x20
# Individual outputs
switch:
- platform: gpio
name: 'OUT 1'
id: out_01
pin:
mcp23xxx: mcp1
number: 8
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 2'
id: out_02
pin:
mcp23xxx: mcp1
number: 9
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 3'
id: out_03
pin:
mcp23xxx: mcp1
number: 10
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 4'
id: out_04
pin:
mcp23xxx: mcp1
number: 11
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 5'
id: out_05
pin:
mcp23xxx: mcp1
number: 12
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 6'
id: out_06
pin:
mcp23xxx: mcp1
number: 13
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 7'
id: out_07
pin:
mcp23xxx: mcp1
number: 14
mode:
output: true
inverted: false
- platform: gpio
name: 'OUT 8'
id: out_08
pin:
mcp23xxx: mcp1
number: 15
mode:
output: true
inverted: false
binary_sensor:
- platform: gpio
name: 'IN 01'
id: in_01
pin:
mcp23xxx: mcp1
number: 0
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 02'
id: in_02
pin:
mcp23xxx: mcp1
number: 1
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 03'
id: in_03
pin:
mcp23xxx: mcp1
number: 2
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 04'
id: in_04
pin:
mcp23xxx: mcp1
number: 3
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 05'
id: in_05
pin:
mcp23xxx: mcp1
number: 4
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 06'
id: in_06
pin:
mcp23xxx: mcp1
number: 5
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 07'
id: in_07
pin:
mcp23xxx: mcp1
number: 6
mode:
input: true
inverted: false
- platform: gpio
name: 'IN 08'
id: in_08
pin:
mcp23xxx: mcp1
number: 7
mode:
input: true
inverted: false

2
boneio-dimmer_2rgbw-v0_3.yaml
View File

@@ -76,7 +76,7 @@ text_sensor:
id: hostname id: hostname
entity_category: diagnostic entity_category: diagnostic
lambda: |- lambda: |-
return id(eth).get_use_address(); return std::string(id(eth).get_use_address());
update_interval: 5min update_interval: 5min
binary_sensor: binary_sensor:

2
boneio-dimmer_4cct-v0_3.yaml
View File

@@ -76,7 +76,7 @@ text_sensor:
id: hostname id: hostname
entity_category: diagnostic entity_category: diagnostic
lambda: |- lambda: |-
return id(eth).get_use_address(); return std::string(id(eth).get_use_address());
update_interval: 5min update_interval: 5min
binary_sensor: binary_sensor:

2
boneio-dimmer_8ch-v0_3.yaml
View File

@@ -76,7 +76,7 @@ text_sensor:
id: hostname id: hostname
entity_category: diagnostic entity_category: diagnostic
lambda: |- lambda: |-
return id(eth).get_use_address(); return std::string(id(eth).get_use_address());
update_interval: 5min update_interval: 5min
binary_sensor: binary_sensor:

2
boneio-dimmer_8ch-v0_4.yaml
View File

@@ -137,7 +137,7 @@ text_sensor:
id: hostname id: hostname
entity_category: diagnostic entity_category: diagnostic
lambda: |- lambda: |-
return id(eth).get_use_address(); return std::string(id(eth).get_use_address());
update_interval: 5min update_interval: 5min
binary_sensor: binary_sensor:

283
boneio-dimmer_gen2_2rgbw-v0_1.yaml Normal file
View File

@@ -0,0 +1,283 @@
substitutions:
name: boneio-dr-gen2-2rgbw-01
friendly_name: 'BoneIO Dimmer Gen2'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-2rgbw-01.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.dimmer-led-gen2
version: '0.1'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
output:
- platform: ledc
pin: GPIO18
frequency: 1000Hz
inverted: false
id: chl01
- platform: ledc
pin: GPIO17
frequency: 1000Hz
inverted: false
id: chl02
- platform: ledc
pin: GPIO16
frequency: 1000Hz
inverted: false
id: chl03
- platform: ledc
pin: GPIO15
frequency: 1000Hz
inverted: false
id: chl04
- platform: ledc
pin: GPIO7
frequency: 1000Hz
inverted: false
id: chr01
- platform: ledc
pin: GPIO6
frequency: 1000Hz
inverted: false
id: chr02
- platform: ledc
pin: GPIO5
frequency: 1000Hz
inverted: false
id: chr03
- platform: ledc
pin: GPIO4
frequency: 1000Hz
inverted: false
id: chr04
# CAN gpio48 - tx, gpio47 rx, gpio35 stb
# uart:
# id: boneio_uart
# rx_pin: GPIO21
# tx_pin: GPIO14
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 80ms
# uart_id: boneio_uart
# id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
]
# boneiopackages:
# url: https://github.com/boneIO-eu/esphome_packages
# ref: main
# refresh: 1min
# files:
# - path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_2rgbw-v0_1.yaml@main
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
version: 3
local: true
light:
- platform: rgbw
id: rgbw_l
name: 'RGBW L'
red: chl01
green: chl02
blue: chl03
white: chl04
default_transition_length: 2s
gamma_correct: 0
- platform: rgbw
id: rgbw_r
name: 'RGBW R'
red: chr01
green: chr02
blue: chr03
white: chr04
default_transition_length: 2s
gamma_correct: 0
debug:
update_interval: 15s
sensor:
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
- platform: lm75b
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: 'CAN Bus Switch'
pin:
number: GPIO35
mode:
output: true
inverted: false
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true

291
boneio-dimmer_gen2_4cct-v0_1.yaml Normal file
View File

@@ -0,0 +1,291 @@
substitutions:
name: boneio-dr-gen2-4cct-01
friendly_name: 'BoneIO Dimmer Gen2'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-4cct-01.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.dimmer-led-gen2
version: '0.1'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
output:
- platform: ledc
pin: GPIO18
frequency: 1000Hz
inverted: false
id: chl01
- platform: ledc
pin: GPIO17
frequency: 1000Hz
inverted: false
id: chl02
- platform: ledc
pin: GPIO16
frequency: 1000Hz
inverted: false
id: chl03
- platform: ledc
pin: GPIO15
frequency: 1000Hz
inverted: false
id: chl04
- platform: ledc
pin: GPIO7
frequency: 1000Hz
inverted: false
id: chr01
- platform: ledc
pin: GPIO6
frequency: 1000Hz
inverted: false
id: chr02
- platform: ledc
pin: GPIO5
frequency: 1000Hz
inverted: false
id: chr03
- platform: ledc
pin: GPIO4
frequency: 1000Hz
inverted: false
id: chr04
# CAN gpio48 - tx, gpio47 rx, gpio35 stb
# uart:
# id: boneio_uart
# rx_pin: GPIO21
# tx_pin: GPIO14
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 80ms
# uart_id: boneio_uart
# id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
]
# boneiopackages:
# url: https://github.com/boneIO-eu/esphome_packages
# ref: main
# refresh: 1min
# files:
# - path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_4cct-v0_1.yaml@main
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
version: 3
local: true
light:
- platform: cwww
name: 'CHL_01_02'
cold_white: chl01
warm_white: chl02
cold_white_color_temperature: 6536 K
warm_white_color_temperature: 2000 K
- platform: cwww
name: 'CHL_03_04'
cold_white: chl03
warm_white: chl04
cold_white_color_temperature: 6536 K
warm_white_color_temperature: 2000 K
- platform: cwww
name: 'CHR_01_02'
cold_white: chr01
warm_white: chr02
cold_white_color_temperature: 6536 K
warm_white_color_temperature: 2000 K
- platform: cwww
name: 'CHR_03_04'
cold_white: chr03
warm_white: chr04
cold_white_color_temperature: 6536 K
warm_white_color_temperature: 2000 K
debug:
update_interval: 15s
sensor:
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
- platform: lm75b
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: 'CAN Bus Switch'
pin:
number: GPIO35
mode:
output: true
inverted: false
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true

374
boneio-dimmer_gen2_8ch-dev0_4-OLD.yaml Normal file
View File

@@ -0,0 +1,374 @@
substitutions:
name: boneio-dr-gen2-8ch-dev04
friendly_name: 'BoneIO Dimmer dev0.4'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/esp/boneio-dr-gen2-8ch-dev04.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.dimmer-led-gen2
version: 'dev0.4'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
external_components:
- source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
components: [lm75]
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
uart:
id: boneio_uart
rx_pin: GPIO21
tx_pin: GPIO14
baud_rate: 9600
stop_bits: 1
output:
- platform: ledc
pin: GPIO18
frequency: 1000Hz
inverted: false
id: chl01
- platform: ledc
pin: GPIO17
frequency: 1000Hz
inverted: false
id: chl02
- platform: ledc
pin: GPIO16
frequency: 1000Hz
inverted: false
id: chl03
- platform: ledc
pin: GPIO15
frequency: 1000Hz
inverted: false
id: chl04
- platform: ledc
pin: GPIO7
frequency: 1000Hz
inverted: false
id: chr01
- platform: ledc
pin: GPIO6
frequency: 1000Hz
inverted: false
id: chr02
- platform: ledc
pin: GPIO5
frequency: 1000Hz
inverted: false
id: chr03
- platform: ledc
pin: GPIO4
frequency: 1000Hz
inverted: false
id: chr04
##CAN gpio48 - tx, gpio47 rx, gpio35 stb
modbus:
send_wait_time: 80ms
uart_id: boneio_uart
id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
# 'devices/dimmer_i2c.yaml',
]
boneiopackages:
url: https://github.com/boneIO-eu/esphome_packages
ref: main
refresh: 1min
files:
- path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_8ch-dev0_4.yaml@main
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
# http_request:
# timeout: 7s
# verify_ssl: false
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
# - platform: http_request
# update:
# - id: update_std
# platform: http_request
# name: boneIO FW Update
# update_interval: 3 minutes
# source: ${firmware_manifest}
web_server:
port: 80
version: 3
local: true
light:
- platform: monochromatic
output: chl01
name: 'CHL 01'
id: chl_01
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl02
name: 'CHL 02'
id: chl_02
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl03
name: 'CHL 03'
id: chl_03
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl04
name: 'CHL 04'
id: chl_04
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr01
name: 'CHR 01'
id: chr_01
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr02
name: 'CHR 02'
id: chr_02
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr03
name: 'CHR 03'
id: chr_03
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr04
name: 'CHR 04'
id: chr_04
default_transition_length: 2s
gamma_correct: 0
debug:
update_interval: 15s
sensor:
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
- platform: lm75
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: 'CAN Bus Switch'
pin:
number: GPIO35
mode:
output: true
inverted: false
- platform: gpio
name: "CAN RX"
pin: GPIO47
- platform: gpio
name: "CAN TX"
pin: GPIO48
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true
- platform: template
name: CAN Bus Button
id: can_bus_button
# canbus:
# - platform: esp32_can
# tx_pin: GPIO48
# rx_pin: GPIO47
# can_id: 4
# bit_rate: 50kbps
# on_frame:
# - can_id: 5
# then:
# - lambda: |-
# if(x.size() > 0) {
# switch(x[0]) {
# case 0x12: // button release
# id(can_bus_button).publish_state(false);
# break;
# case 0x11: // button press
# id(can_bus_button).publish_state(true);
# break;
# }
# }
# button:
# - platform: template
# name: 'CAN Sensor ON'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x11, 0x22, 0x33]
# - platform: template
# name: 'CAN Sensor OFF'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x12, 0x22, 0x33]

374
boneio-dimmer_gen2_8ch-dev0_4.yaml
View File

@@ -1,374 +0,0 @@
substitutions:
name: boneio-dr-gen2-8ch-dev04
friendly_name: 'BoneIO Dimmer dev0.4'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/esp/boneio-dr-gen2-8ch-dev04.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.dimmer-led-gen2
version: 'dev0.4'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
external_components:
- source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
components: [lm75]
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
uart:
id: boneio_uart
rx_pin: GPIO21
tx_pin: GPIO14
baud_rate: 9600
stop_bits: 1
output:
- platform: ledc
pin: GPIO18
frequency: 1000Hz
inverted: false
id: chl01
- platform: ledc
pin: GPIO17
frequency: 1000Hz
inverted: false
id: chl02
- platform: ledc
pin: GPIO16
frequency: 1000Hz
inverted: false
id: chl03
- platform: ledc
pin: GPIO15
frequency: 1000Hz
inverted: false
id: chl04
- platform: ledc
pin: GPIO7
frequency: 1000Hz
inverted: false
id: chr01
- platform: ledc
pin: GPIO6
frequency: 1000Hz
inverted: false
id: chr02
- platform: ledc
pin: GPIO5
frequency: 1000Hz
inverted: false
id: chr03
- platform: ledc
pin: GPIO4
frequency: 1000Hz
inverted: false
id: chr04
##CAN gpio48 - tx, gpio47 rx, gpio35 stb
modbus:
send_wait_time: 80ms
uart_id: boneio_uart
id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
# 'devices/dimmer_i2c.yaml',
]
boneiopackages:
url: https://github.com/boneIO-eu/esphome_packages
ref: main
refresh: 1min
files:
- path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-dimmer_g2_8ch-dev0_4.yaml@main
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
# http_request:
# timeout: 7s
# verify_ssl: false
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
# - platform: http_request
# update:
# - id: update_std
# platform: http_request
# name: boneIO FW Update
# update_interval: 3 minutes
# source: ${firmware_manifest}
web_server:
port: 80
version: 3
local: true
light:
- platform: monochromatic
output: chl01
name: 'CHL 01'
id: chl_01
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl02
name: 'CHL 02'
id: chl_02
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl03
name: 'CHL 03'
id: chl_03
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl04
name: 'CHL 04'
id: chl_04
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr01
name: 'CHR 01'
id: chr_01
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr02
name: 'CHR 02'
id: chr_02
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr03
name: 'CHR 03'
id: chr_03
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr04
name: 'CHR 04'
id: chr_04
default_transition_length: 2s
gamma_correct: 0
debug:
update_interval: 15s
sensor:
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
- platform: lm75
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: 'CAN Bus Switch'
pin:
number: GPIO35
mode:
output: true
inverted: false
- platform: gpio
name: "CAN RX"
pin: GPIO47
- platform: gpio
name: "CAN TX"
pin: GPIO48
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true
- platform: template
name: CAN Bus Button
id: can_bus_button
# canbus:
# - platform: esp32_can
# tx_pin: GPIO48
# rx_pin: GPIO47
# can_id: 4
# bit_rate: 50kbps
# on_frame:
# - can_id: 5
# then:
# - lambda: |-
# if(x.size() > 0) {
# switch(x[0]) {
# case 0x12: // button release
# id(can_bus_button).publish_state(false);
# break;
# case 0x11: // button press
# id(can_bus_button).publish_state(true);
# break;
# }
# }
# button:
# - platform: template
# name: 'CAN Sensor ON'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x11, 0x22, 0x33]
# - platform: template
# name: 'CAN Sensor OFF'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x12, 0x22, 0x33]

1
boneio-dimmer_gen2_8ch-dev0_4.yaml Symbolic link
View File

@@ -0,0 +1 @@
boneio-dimmer_gen2_8ch-v0_1.yaml

314
boneio-dimmer_gen2_8ch-v0_1.yaml Normal file
View File

@@ -0,0 +1,314 @@
substitutions:
name: boneio-dr-gen2-8ch-01
friendly_name: 'BoneIO Dimmer Gen2'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-8ch-01.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.dimmer-led-gen2
version: '0.1'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
output:
- platform: ledc
pin: GPIO18
frequency: 1000Hz
inverted: false
id: chl01
- platform: ledc
pin: GPIO17
frequency: 1000Hz
inverted: false
id: chl02
- platform: ledc
pin: GPIO16
frequency: 1000Hz
inverted: false
id: chl03
- platform: ledc
pin: GPIO15
frequency: 1000Hz
inverted: false
id: chl04
- platform: ledc
pin: GPIO7
frequency: 1000Hz
inverted: false
id: chr01
- platform: ledc
pin: GPIO6
frequency: 1000Hz
inverted: false
id: chr02
- platform: ledc
pin: GPIO5
frequency: 1000Hz
inverted: false
id: chr03
- platform: ledc
pin: GPIO4
frequency: 1000Hz
inverted: false
id: chr04
# CAN gpio48 - tx, gpio47 rx, gpio35 stb
# uart:
# id: boneio_uart
# rx_pin: GPIO21
# tx_pin: GPIO14
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 80ms
# uart_id: boneio_uart
# id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
]
# boneiopackages:
# url: https://github.com/boneIO-eu/esphome_packages
# ref: main
# refresh: 1min
# files:
# - path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_8ch-v0_1.yaml@main
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
version: 3
local: true
light:
- platform: monochromatic
output: chl01
name: 'CHL 01'
id: chl_01
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl02
name: 'CHL 02'
id: chl_02
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl03
name: 'CHL 03'
id: chl_03
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chl04
name: 'CHL 04'
id: chl_04
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr01
name: 'CHR 01'
id: chr_01
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr02
name: 'CHR 02'
id: chr_02
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr03
name: 'CHR 03'
id: chr_03
default_transition_length: 2s
gamma_correct: 0
- platform: monochromatic
output: chr04
name: 'CHR 04'
id: chr_04
default_transition_length: 2s
gamma_correct: 0
debug:
update_interval: 15s
sensor:
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
- platform: lm75b
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: 'CAN Bus Switch'
pin:
number: GPIO35
mode:
output: true
inverted: false
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true

44
create_firmware.py
View File

@@ -14,23 +14,42 @@ cwd = os.getcwd()
pattern = r"name:\s*(\S+)" pattern = r"name:\s*(\S+)"
json_destination = "../website/public/esp" json_destination = "../website2/public/fwesp"
firmware_destination = "../website/public/esp/firmware" firmware_destination = "../website2/public/fwesp/firmware"
firmware_destination2 = "../esphome_uploader/firmware"
# Lista plików do wykluczenia z przetwarzania
exclude_files = [
"dimmer_gen2_can.yaml",
"dimmer_gen2_emc.yaml",
"dev-boneio-32x10_lights_v0_9.yaml"
"boneio-mosfet48_lights_v0_7.yaml",
"boneio-mosfet48_switches_v0_7.yaml"
"boneio-8x10A_v0_1.yaml"
"boneio-dimmer_gen2_8ch-dev0_4.yaml"
# Dodaj tutaj kolejne pliki do wykluczenia
]
include_files = [
"boneio-8x10A_gen2_lights-v0_1.yaml",
# "boneio-dimmer_gen2_2rgbw-v0_1.yaml",
]
def json_pattern(firmware_name): def json_pattern(firmware_name, chip_family="ESP32"):
return { return {
"name": "ESPHome", "name": "ESPHome",
"version": "2025.8.2", "version": "2025.11.2",
"home_assistant_domain": "esphome", "home_assistant_domain": "esphome",
"funding_url": "https://esphome.io/guides/supporters.html", "funding_url": "https://esphome.io/guides/supporters.html",
"new_install_prompt_erase": False, "new_install_prompt_erase": False,
"builds": [ "builds": [
{ {
"chipFamily": "ESP32", "chipFamily": chip_family,
"parts": [ "parts": [
{ {
"path": f"/esp/firmware/{firmware_name}.bin", "path": f"/fwesp/firmware/{firmware_name}.bin",
"offset": 0, "offset": 0,
} }
], ],
@@ -51,7 +70,16 @@ def get_boneio_name(file):
for file in glob.glob("*.yaml"): for file in glob.glob("*.yaml"):
# Pomiń pliki z listy wykluczeń
if file in exclude_files:
print(f"Skipping excluded file: {file}")
continue
if file not in include_files:
print(f"Skipping file: {file}")
continue
filename = get_boneio_name(file) filename = get_boneio_name(file)
chip_family = "ESP32-S3" if "gen2" in filename else "ESP32"
if not filename: if not filename:
print("No file found.") print("No file found.")
break break
@@ -66,12 +94,14 @@ for file in glob.glob("*.yaml"):
print("Process failed, breaking.") print("Process failed, breaking.")
break break
shutil.copyfile(firmware_path, f"{firmware_destination}/{filename}.bin") shutil.copyfile(firmware_path, f"{firmware_destination}/{filename}.bin")
shutil.copyfile(firmware_path, f"{firmware_destination2}/{filename}.bin")
with open( with open(
f"{json_destination}/{filename}.json", "w", encoding="utf-8" f"{json_destination}/{filename}.json", "w", encoding="utf-8"
) as f: ) as f:
print(f"Creating JSON file: {json_destination}/{filename}.json")
json.dump( json.dump(
json_pattern(firmware_name=filename), json_pattern(firmware_name=filename, chip_family=chip_family),
f, f,
ensure_ascii=False, ensure_ascii=False,
indent=4, indent=4,

355
dev-boneio-8x10A-adc.yaml Normal file
View File

@@ -0,0 +1,355 @@
substitutions:
name: boneio-8x10a-cover-dev01
friendly_name: 'BoneIO Relay 8x10A dev0.1'
serial_prefix: 'dim2' #Don't change it.
firmware_manifest: 'https://boneio.eu/esp/boneio-relay-8x10a-cover-dev0.3.json'
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.relay-8x10a-cover
version: 'dev0.3'
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
external_components:
- source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
components: [lm75]
i2c:
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
uart:
id: boneio_uart
rx_pin: GPIO21
tx_pin: GPIO14
baud_rate: 9600
stop_bits: 1
spi:
- id: spi_ade7953
mosi_pin: GPIO35
miso_pin: GPIO37
clk_pin: GPIO36
modbus:
send_wait_time: 80ms
uart_id: boneio_uart
id: boneio_modbus
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
]
boneiopackages:
url: https://github.com/boneIO-eu/esphome_packages
ref: main
refresh: 1min
files:
- path: sdm630.yaml
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-relay-8x10a-cover-dev0.3.yaml@main
import_full_config: true
pcf8574:
- id: 'pcf_inputs'
address: 0x38
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
# update:
# - id: update_std
# platform: http_request
# name: boneIO FW Update
# update_interval: 3 minutes
# source: ${firmware_manifest}
web_server:
port: 80
version: 3
local: true
debug:
update_interval: 15s
sensor:
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
- platform: lm75
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
- platform: ade7953_spi
spi_id: spi_ade7953
cs_pin: GPIO40
irq_pin: GPIO15
update_interval: 10s
voltage:
name: "ADE7953 1 Voltage"
current_a:
name: "ADE7953 1 Current"
- platform: ade7953_spi
spi_id: spi_ade7953
cs_pin: GPIO41
irq_pin: GPIO16
update_interval: 10s
voltage:
name: "ADE7953 2 Voltage"
current_a:
name: "ADE7953 2 Current"
- platform: ade7953_spi
spi_id: spi_ade7953
cs_pin: GPIO42
irq_pin: GPIO17
update_interval: 10s
voltage:
name: "ADE7953 3 Voltage"
current_a:
name: "ADE7953 3 Current"
- platform: ade7953_spi
spi_id: spi_ade7953
cs_pin: GPIO45
irq_pin: GPIO18
update_interval: 10s
voltage:
name: "ADE7953 4 Voltage"
current_a:
name: "ADE7953 4 Current"
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO9
mode:
output: true
inverted: false
# *** POCZĄTEK AKTUALIZACJI ***
- platform: gpio
id: can_stb # Poprzednio id: can_bus_switch
name: 'CAN STB' # Poprzednio name: 'CAN Bus Switch'
pin:
number: GPIO20 # Pin dla CAN_STB
mode:
output: true
inverted: false
- platform: gpio
id: can_led
name: 'CAN LED'
pin:
number: GPIO8 # Pin dla CAN_LED
mode:
output: true
inverted: false
# *** KONIEC AKTUALIZACJI ***
- platform: gpio
name: "CAN RX"
pin: GPIO47
- platform: gpio
name: "CAN TX"
pin: GPIO48
# Przełączniki dla linii RST układów ADE7953
- platform: gpio
name: "ADE7953 RST 1"
pin: GPIO4
- platform: gpio
name: "ADE7953 RST 2"
pin: GPIO5
- platform: gpio
name: "ADE7953 RST 3"
pin: GPIO6
- platform: gpio
name: "ADE7953 RST 4"
pin: GPIO7
# !!! BRAKUJĄCA SEKCJA !!!
# Musisz tutaj dodać definicje dla 8 przekaźników.
# Na przykład:
# - platform: gpio
# name: "Relay 1"
# pin: GPIO_PIN_PRZEKAŹNIKA_1
# - platform: gpio
# name: "Relay 2"
# pin: GPIO_PIN_PRZEKAŹNIKA_2
# ... i tak 8 razy
binary_sensor:
- platform: gpio
name: 'IN_01'
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_02'
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_03'
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_04'
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_05'
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_06'
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_07'
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: 'IN_08'
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true
- platform: template
name: CAN Bus Button
id: can_bus_button
# canbus:
# - platform: esp32_can
# tx_pin: GPIO48
# rx_pin: GPIO47
# can_id: 4
# bit_rate: 50kbps
# on_frame:
# - can_id: 5
# then:
# - lambda: |-
# if(x.size() > 0) {
# switch(x[0]) {
# case 0x12: // button release
# id(can_bus_button).publish_state(false);
# break;
# case 0x11: // button press
# id(can_bus_button).publish_state(true);
# break;
# }
# }
# button:
# - platform: template
# name: 'CAN Sensor ON'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x11, 0x22, 0x33]
# - platform: template
# name: 'CAN Sensor OFF'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x12, 0x22, 0x33]

194
dev-boneio-ps01.yaml Normal file
View File

@@ -0,0 +1,194 @@
substitutions:
name: boneio-ps-01
friendly_name: 'BoneIO PS-01 Czujnik Obecności'
serial_prefix: 'ps01' #Don't change it.
firmware_manifest: 'https://boneio.eu/esp/boneio-ps-01.json' # URL manifestu
esphome:
name: '${name}'
friendly_name: '${friendly_name}'
name_add_mac_suffix: true
project:
name: boneio.presence-sensor-ps01
version: 'dev0.1' # Przykładowa wersja
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: 'return id(serial_no) != nullptr;'
then:
- component.update: serial_no
- logger.log: "Serial No updated on boot"
else:
- logger.log: "Serial No component not found"
esp32:
variant: esp32s3
flash_size: 16MB
framework:
type: esp-idf
psram:
mode: octal
speed: 80MHz
# --- NOWA SEKCJA: WiFi ---
wifi:
ssid: "TwojeSSID"
password: "TwojeHaslo"
# Tryb AP do pierwszej konfiguracji
ap:
ssid: "PS-01 Sensor Setup"
password: "boneio-setup"
captive_portal:
i2c:
id: i2c_bus # Dodano ID dla czujników
sda: GPIO10
scl: GPIO11
scan: True
frequency: 400kHz
# --- ZAKTUALIZOWANY UART (dla radaru) ---
uart:
- id: radar_uart
tx_pin: GPIO21 # ESP TX -> Radar RX
rx_pin: GPIO14 # ESP RX -> Radar TX
baud_rate: 115200 # Standard dla LD2412
- id: boneio_uart
rx_pin: GPIO47 # CAN RX wg tabeli (dla CAN Bus)
tx_pin: GPIO48 # CAN TX wg tabeli (dla CAN Bus)
baud_rate: 9600
stop_bits: 1
# --- NOWA SEKCJA: Radar LD2412 ---
ld2412:
uart_id: radar_uart
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [
'devices/serial_no.yaml',
]
dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-ps-01-presence-sensor.yaml@main # Zgadywany URL
import_full_config: true
# --- USUNIĘTY pcf8574 ---
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
version: 3
local: true
# --- USUNIĘTE 'output' i 'light' ---
debug:
update_interval: 15s
sensor:
- platform: lm75b
id: boneIO_temp
name: 'Temperature'
update_interval: 30s
entity_category: diagnostic
on_value_range:
- above: 70.0
then:
- switch.turn_on: buzzer
- below: 70.0
then:
- switch.turn_off: buzzer
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
# --- NOWA SEKCJA: Czujniki I2C ---
- platform: sht4x
i2c_id: i2c_bus
address: 0x44 # Z tabeli
temperature:
name: "Temperatura"
humidity:
name: "Wilgotność"
update_interval: 15s
- platform: veml7700
address: 0x10
update_interval: 60s
# short variant of sensor definition:
ambient_light: "Ambient light"
# longer variant of sensor definition:
actual_gain:
name: "Actual gain"
# Czujniki dla radaru LD2412 (dystans, energia)
# zostaną dodane automatycznie przez komponent 'ld2412'
switch:
- platform: gpio
id: buzzer
name: 'Buzzer'
pin:
number: GPIO12 # Zaktualizowany pin
mode: output
inverted: false
- platform: gpio
id: can_stb
name: 'CAN STB'
pin:
number: GPIO13 # Zaktualizowany pin
mode: output
inverted: false
# --- NOWA SEKCJA: Przełączniki ---
- platform: gpio
id: led_status
name: 'LED Status'
pin:
number: GPIO1 # Zaktualizowany pin
mode: output
inverted: false
- platform: gpio
id: relay_1
name: 'Przekaźnik 1'
pin:
number: GPIO18 # Z tabeli
mode: output
inverted: false
- platform: gpio
id: relay_2
name: 'Przekaźnik 2'
pin:
number: GPIO17 # Z tabeli
mode: output
inverted: false
binary_sensor:
- platform: gpio
name: 'Obecność (Pin OUT)'
pin:
number: GPIO41 # RADAR_OUT
mode: input
device_class: presence

5
devices_v0_5-v0_6/one_wire.yaml
View File

@@ -1,5 +1,6 @@
dallas: one_wire:
- pin: GPIO32 - platform: gpio
pin: GPIO32
# sensor: # sensor:
# - platform: dallas # - platform: dallas

284
dimmer_gen2_can.yaml Normal file
View File

@@ -0,0 +1,284 @@
#CAN
substitutions:
name: boneio-dr-gen2-8ch-dev04-3328f7
friendly_name: BoneIO Dimmer dev0.4 3328f7
serial_prefix: dim2 #Don't change it.
firmware_manifest: https://boneio.eu/esp/boneio-dr-gen2-8ch-dev04.json
esphome:
name: ${name}
friendly_name: ${friendly_name}
name_add_mac_suffix: false
project:
name: boneio.dimmer-led-gen2
version: dev0.4
on_boot:
priority: -100
then:
- delay: 5s
- if:
condition:
lambda: return id(serial_no) != nullptr;
then:
- component.update: serial_no
- logger.log: Serial No updated on boot
else:
- logger.log: Serial No component not found
external_components:
- source: github://mrk-its/esphome-canopen
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
ethernet:
id: eth
type: W5500
clk_pin: GPIO13
mosi_pin: GPIO39
miso_pin: GPIO38
cs_pin: GPIO12
interrupt_pin: GPIO2
reset_pin: GPIO1
clock_speed: 25MHz
# use_address: 192.168.13.107
use_address: 192.168.50.173
i2c:
sda: GPIO10
scl: GPIO11
scan: true
frequency: 400kHz
uart:
id: boneio_uart
rx_pin: GPIO21
tx_pin: GPIO14
baud_rate: 9600
stop_bits: 1
output:
- platform: ledc
pin: GPIO18
frequency: 1000Hz
inverted: false
id: chl01
- platform: ledc
pin: GPIO17
frequency: 1000Hz
inverted: false
id: chl02
- platform: ledc
pin: GPIO16
frequency: 1000Hz
inverted: false
id: chl03
- platform: ledc
pin: GPIO15
frequency: 1000Hz
inverted: false
id: chl04
- platform: ledc
pin: GPIO7
frequency: 1000Hz
inverted: false
id: chr01
- platform: ledc
pin: GPIO6
frequency: 1000Hz
inverted: false
id: chr02
- platform: ledc
pin: GPIO5
frequency: 1000Hz
inverted: false
id: chr03
- platform: ledc
pin: GPIO4
frequency: 1000Hz
inverted: false
id: chr04
##CAN gpio48 - tx, gpio47 rx, gpio35 stb
packages:
internals_packages:
url: https://github.com/boneIO-eu/esphome
ref: v1.7.1
files: [devices/serial_no.yaml]
dashboard_import:
package_import_url:
github://boneIO-eu/esphome/boneio-dimmer_g2_8ch-dev0_4.yaml@main
import_full_config: true
pcf8574:
- id: pcf_inputs
address: 0x38
# http_request:
# timeout: 7s
# verify_ssl: false
logger:
hardware_uart: UART0
api:
reboot_timeout: 0s
ota:
- platform: esphome
- platform: web_server
web_server:
port: 80
version: 3
local: true
switch:
- platform: gpio
id: buzzer
name: Buzzer
pin:
number: GPIO9
mode:
output: true
inverted: false
- platform: gpio
id: can_bus_switch
name: CAN Bus Switch
pin:
number: GPIO3
mode:
output: true
inverted: false
- platform: template
id: master
name: master
optimistic: true
on_turn_on:
then:
- delay: 0ms
- lambda: id(can_open).send_entity_cmd(0x2, 1, (uint8_t)1);
on_turn_off:
then:
- delay: 0ms
- lambda: id(can_open).send_entity_cmd(0x2, 1, (uint8_t)0);
binary_sensor:
- platform: gpio
name: IN_01
id: in_01
pin:
pcf8574: pcf_inputs
number: 0
mode:
input: true
inverted: true
- platform: gpio
name: IN_02
id: in_02
pin:
pcf8574: pcf_inputs
number: 1
mode:
input: true
inverted: true
- platform: gpio
name: IN_03
id: in_03
pin:
pcf8574: pcf_inputs
number: 2
mode:
input: true
inverted: true
- platform: gpio
name: IN_04
id: in_04
pin:
pcf8574: pcf_inputs
number: 3
mode:
input: true
inverted: true
- platform: gpio
name: IN_05
id: in_05
pin:
pcf8574: pcf_inputs
number: 4
mode:
input: true
inverted: true
- platform: gpio
name: IN_06
id: in_06
pin:
pcf8574: pcf_inputs
number: 5
mode:
input: true
inverted: true
- platform: gpio
name: IN_07
id: in_07
pin:
pcf8574: pcf_inputs
number: 6
mode:
input: true
inverted: true
- platform: gpio
name: IN_08
id: in_08
pin:
pcf8574: pcf_inputs
number: 7
mode:
input: true
inverted: true
- platform: template
name: CAN Bus Button
id: can_bus_button
canbus:
- platform: esp32_can
id: can_bus
tx_pin: GPIO48
rx_pin: GPIO47
can_id: 1
bit_rate: 50kbps
# button:
# - platform: template
# name: 'CAN Sensor ON'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x11, 0x22, 0x33]
# - platform: template
# name: 'CAN Sensor OFF'
# on_press:
# - logger.log: Button Pressed
# - canbus.send: [0x12, 0x22, 0x33]
canopen:
id: can_open
canbus_id: can_bus
entities: []
node_id: 1

0
dimmer_gen2_emc.yaml Normal file
View File