diff --git a/cover_32x10A_board.yaml b/cover_32x10A_board.yaml
deleted file mode 100644
index 1b7c132..0000000
--- a/cover_32x10A_board.yaml
+++ /dev/null
@@ -1,1322 +0,0 @@
-esphome:
-  name: cover-board-v0-1
-
-esp32:
-  board: esp32dev
-  framework:
-    type: arduino
-
-external_components:
-  - source: github://ell249/esphome-PCT2075@master
-    components: [ pct2075 ]
-    
-ethernet:
-  id: eth
-  type: LAN8720
-  mdc_pin: GPIO23
-  mdio_pin: GPIO18
-  clk_mode: GPIO0_IN
-  phy_addr: 1
-  power_pin: GPIO16
-
-    
-i2c:
-  sda: GPIO14
-  scl: GPIO15
-  scan: True
-  frequency: 100kHz
-
-logger:
-  baud_rate: 0
-api:
-ota:
-web_server:
-  port: 80
-  
-time:
-  - platform: ds1307
-    id: ds1307_time
-  
-  - platform: homeassistant
-    # instead try to synchronize via network repeatedly ...
-    on_time_sync:
-      then:
-        # ... and update the RTC when the synchronization was successful
-        ds1307.write_time:
-
-
-mcp23017:
-  - id: 'mcp_1'
-    address: 0x26
-  - id: 'mcp_2'
-    address: 0x27
-  - id: 'mcp_3'
-    address: 0x21
-  - id: 'mcp_4'
-    address: 0x20
-    
-uart:
-
-  id: modbus_serial
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1
-
-#modbus:
-
-  #flow_control_pin: 5
-  #id: modbus1
-  #uart_id: modbus_serial
-
-#modbus_controller:
-
- # - id: edpbox
- #  update_interval: 31s
- #   address: 0x1
- # command_throttle: 150ms
- #   setup_priority: -10    
-  
-switch:
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 0
-      mode: OUTPUT
-      inverted: false
-    id: relay1
-    interlock: &interlock_1 [relay1, relay2]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 1
-      mode: OUTPUT
-      inverted: false
-    id: relay2
-    interlock: *interlock_1
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 2
-      mode: OUTPUT
-      inverted: false
-    id: relay3
-    interlock: &interlock_2 [relay3, relay4]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 3
-      mode: OUTPUT
-      inverted: false
-    id: relay4
-    interlock: *interlock_2
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 4
-      mode: OUTPUT
-      inverted: false
-    id: relay5
-    interlock: &interlock_3 [relay5, relay6]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 5
-      mode: OUTPUT
-      inverted: false
-    id: relay6
-    interlock: *interlock_3
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 6
-      mode: OUTPUT
-      inverted: false
-    id: relay7
-    interlock: &interlock_4 [relay7, relay8]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 7
-      mode: OUTPUT
-      inverted: false
-    id: relay8
-    interlock: *interlock_4
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 8
-      mode: OUTPUT
-      inverted: false
-    id: relay9
-    interlock: &interlock_5 [relay9, relay10]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 9
-      mode: OUTPUT
-      inverted: false
-    id: relay10
-    interlock: *interlock_5
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 10
-      mode: OUTPUT
-      inverted: false
-    id: relay11
-    interlock: &interlock_6 [relay11, relay12]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 11
-      mode: OUTPUT
-      inverted: false
-    id: relay12
-    interlock: *interlock_6
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 12
-      mode: OUTPUT
-      inverted: false
-    id: relay13
-    interlock: &interlock_7 [relay13, relay14]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 13
-      mode: OUTPUT
-      inverted: false
-    id: relay14
-    interlock: *interlock_7
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 14
-      mode: OUTPUT
-      inverted: false
-    id: relay15
-    interlock: &interlock_8 [relay15, relay16]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_3
-      number: 15
-      mode: OUTPUT
-      inverted: false
-    id: relay16
-    interlock: *interlock_8
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 0
-      mode: OUTPUT
-      inverted: false
-    id: relay17
-    interlock: &interlock_9 [relay17, relay18]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 1
-      mode: OUTPUT
-      inverted: false
-    id: relay18
-    interlock: *interlock_9
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 2
-      mode: OUTPUT
-      inverted: false
-    id: relay19
-    interlock: &interlock_10 [relay19, relay20]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 3
-      mode: OUTPUT
-      inverted: false
-    id: relay20
-    interlock: *interlock_10
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 4
-      mode: OUTPUT
-      inverted: false
-    id: relay21
-    interlock: &interlock_11 [relay21, relay22]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 5
-      mode: OUTPUT
-      inverted: false
-    id: relay22
-    interlock: *interlock_11
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 6
-      mode: OUTPUT
-      inverted: false
-    id: relay23
-    interlock: &interlock_12 [relay23, relay24]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 7
-      mode: OUTPUT
-      inverted: false
-    id: relay24
-    interlock: *interlock_12
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 8
-      mode: OUTPUT
-      inverted: false
-    id: relay25
-    interlock: &interlock_13 [relay25, relay26]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 9
-      mode: OUTPUT
-      inverted: false
-    id: relay26
-    interlock: *interlock_13
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 10
-      mode: OUTPUT
-      inverted: false
-    id: relay27
-    interlock: &interlock_14 [relay27, relay28]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 11
-      mode: OUTPUT
-      inverted: false
-    id: relay28
-    interlock: *interlock_14
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 12
-      mode: OUTPUT
-      inverted: false
-    id: relay29
-    interlock: &interlock_15 [relay29, relay30]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 13
-      mode: OUTPUT
-      inverted: false
-    id: relay30
-    interlock: *interlock_15
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 14
-      mode: OUTPUT
-      inverted: false
-    id: relay31
-    interlock: &interlock_16 [relay31, relay32]
-    interlock_wait_time: 200ms
-  - platform: gpio
-    pin:
-      mcp23xxx: mcp_4
-      number: 15
-      mode: OUTPUT
-      inverted: false
-    id: relay32
-    interlock: *interlock_16
-    interlock_wait_time: 200ms
-
-
-
-
-cover:
-  - platform: time_based
-    name: "Cover_01"
-    id: cover_01
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay1
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay2
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay1
-      - switch.turn_off: relay2
-  - platform: time_based
-    name: "Cover_02"
-    id: cover_02
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay3
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay4
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay3
-      - switch.turn_off: relay4
-  - platform: time_based
-    name: "Cover_03"
-    id: cover_03
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay5
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay6
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay5
-      - switch.turn_off: relay6
-  - platform: time_based
-    name: "Cover_04"
-    id: cover_04
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay7
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay8
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay7
-      - switch.turn_off: relay8
-  - platform: time_based
-    name: "Cover_05"
-    id: cover_05
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay9
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay10
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay9
-      - switch.turn_off: relay10
-  - platform: time_based
-    name: "Cover_06"
-    id: cover_06
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay11
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay12
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay11
-      - switch.turn_off: relay12
-  - platform: time_based
-    name: "Cover_07"
-    id: cover_07
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay13
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay14
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay13
-      - switch.turn_off: relay14
-  - platform: time_based
-    name: "Cover_08"
-    id: cover_08
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay15
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay16
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay15
-      - switch.turn_off: relay16
-  - platform: time_based
-    name: "Cover_09"
-    id: cover_09
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay17
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay18
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay17
-      - switch.turn_off: relay18   
-  - platform: time_based
-    name: "Cover_10"
-    id: cover_10
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay19
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay20
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay19
-      - switch.turn_off: relay20
-  - platform: time_based
-    name: "Cover_11"
-    id: cover_11
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay21
-    open_duration: 30s
-    close_action:
-      - switch.turn_on: relay22
-    close_duration: 30s
-    stop_action:
-      - switch.turn_off: relay21
-      - switch.turn_off: relay22
-  - platform: time_based
-    name: "Cover_12"
-    id: cover_12
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay23
-    open_duration: 35s
-    close_action:
-      - switch.turn_on: relay24
-    close_duration: 29s
-    stop_action:
-      - switch.turn_off: relay23
-      - switch.turn_off: relay24
-  - platform: time_based
-    name: "Cover_13"
-    id: cover_13
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay25
-    open_duration: 35s
-    close_action:
-      - switch.turn_on: relay26
-    close_duration: 29s
-    stop_action:
-      - switch.turn_off: relay25
-      - switch.turn_off: relay26
-  - platform: time_based
-    name: "Cover_14"
-    id: cover_14
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay27
-    open_duration: 35s
-    close_action:
-      - switch.turn_on: relay28
-    close_duration: 29s
-    stop_action:
-      - switch.turn_off: relay27
-      - switch.turn_off: relay28
-  - platform: time_based
-    name: "Cover_15"
-    id: cover_15
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay29
-    open_duration: 35s
-    close_action:
-      - switch.turn_on: relay30
-    close_duration: 29s
-    stop_action:
-      - switch.turn_off: relay29
-      - switch.turn_off: relay30
-  - platform: time_based
-    name: "Cover_16"
-    id: cover_16
-    assumed_state: false
-    open_action:
-      - switch.turn_on: relay31
-    open_duration: 17s
-    close_action:
-      - switch.turn_on: relay32
-    close_duration: 14s
-    stop_action:
-      - switch.turn_off: relay31
-      - switch.turn_off: relay32
-
-
-
-
-binary_sensor:
-
-  - platform: gpio
-    name: "IN_01"
-    pin:
-      mcp23xxx: mcp_1
-      number: 0
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_01
-    on_release:
-        cover.stop: cover_01
-  - platform: gpio
-    name: "IN_02"
-    pin:
-      mcp23xxx: mcp_1
-      number: 1
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_01
-    on_release:
-        cover.stop: cover_01
-  - platform: gpio
-    name: "IN_03"
-    pin:
-      mcp23xxx: mcp_1
-      number: 2
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_02
-    on_release:
-        cover.stop: cover_02
-  - platform: gpio
-    name: "IN_04"
-    pin:
-      mcp23xxx: mcp_1
-      number: 3
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_02
-    on_release:
-        cover.stop: cover_02
-  - platform: gpio
-    name: "IN_05"
-    pin:
-      mcp23xxx: mcp_1
-      number: 4
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_03
-    on_release:
-        cover.stop: cover_03
-  - platform: gpio
-    name: "IN_06"
-    pin:
-      mcp23xxx: mcp_1
-      number: 5
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_03
-    on_release:
-        cover.stop: cover_03
-  - platform: gpio
-    name: "IN_07"
-    pin:
-      mcp23xxx: mcp_1
-      number: 6
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_04
-    on_release:
-        cover.stop: cover_04
-  - platform: gpio
-    name: "IN_08"
-    pin:
-      mcp23xxx: mcp_1
-      number: 7
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_04
-    on_release:
-        cover.stop: cover_04
-  - platform: gpio
-    name: "IN_09"
-    pin:
-      mcp23xxx: mcp_1
-      number: 8
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_05
-    on_release:
-        cover.stop: cover_05
-  - platform: gpio
-    name: "IN_10"
-    pin:
-      mcp23xxx: mcp_1
-      number: 9
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_05
-    on_release:
-        cover.stop: cover_05
-  - platform: gpio
-    name: "IN_11"
-    pin:
-      mcp23xxx: mcp_1
-      number: 10
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_06
-    on_release:
-        cover.stop: cover_06
-  - platform: gpio
-    name: "IN_12"
-    pin:
-      mcp23xxx: mcp_1
-      number: 11
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_06
-    on_release:
-        cover.stop: cover_06
-  - platform: gpio
-    name: "IN_13"
-    pin:
-      mcp23xxx: mcp_1
-      number: 12
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_07
-    on_release:
-        cover.stop: cover_07
-  - platform: gpio
-    name: "IN_14"
-    pin:
-      mcp23xxx: mcp_1
-      number: 13
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_07
-    on_release:
-        cover.stop: cover_07
-  - platform: gpio
-    name: "IN_15"
-    pin:
-      mcp23xxx: mcp_1
-      number: 14
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_08
-    on_release:
-        cover.stop: cover_08
-  - platform: gpio
-    name: "IN_16"
-    pin:
-      mcp23xxx: mcp_1
-      number: 15
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_08
-    on_release:
-        cover.stop: cover_08
-  - platform: gpio
-    name: "IN_17"
-    pin:
-      mcp23xxx: mcp_2
-      number: 7
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_09
-    on_release:
-        cover.stop: cover_09
-  - platform: gpio
-    name: "IN_18"
-    pin:
-      mcp23xxx: mcp_2
-      number: 6
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_09
-    on_release:
-        cover.stop: cover_09
-  - platform: gpio
-    name: "IN_19"
-    pin:
-      mcp23xxx: mcp_2
-      number: 5
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_10
-    on_release:
-        cover.stop: cover_10
-  - platform: gpio
-    name: "IN_20"
-    pin:
-      mcp23xxx: mcp_2
-      number: 4
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_10
-    on_release:
-        cover.stop: cover_10
-  - platform: gpio
-    name: "IN_21"
-    pin:
-      mcp23xxx: mcp_2
-      number: 3
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_11
-    on_release:
-        cover.stop: cover_11
-  - platform: gpio
-    name: "IN_22"
-    pin:
-      mcp23xxx: mcp_2
-      number: 2
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_11
-    on_release:
-        cover.stop: cover_11
-  - platform: gpio
-    name: "IN_23"
-    pin:
-      mcp23xxx: mcp_2
-      number: 1
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.open: cover_12
-    on_release:
-        cover.stop: cover_12
-  - platform: gpio
-    name: "IN_24"
-    pin:
-      mcp23xxx: mcp_2
-      number: 0
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        cover.close: cover_12
-    on_release:
-        cover.stop: cover_12
-  - platform: gpio
-    name: "IN_25"
-    pin:
-      mcp23xxx: mcp_2
-      number: 8
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_13).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_13).is_fully_closed()) {
-                id(cover_13).open();
-              } else {
-                id(cover_13).open();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_13).stop();
-            }      
-#        cover.open: cover_13
-#    on_release:
-#        cover.stop: cover_13
-  - platform: gpio
-    name: "IN_26"
-    pin:
-      mcp23xxx: mcp_2
-      number: 9
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_13).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_13).is_fully_closed()) {
-                id(cover_13).open();
-              } else {
-                id(cover_13).close();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_13).stop();
-            }      
-#        cover.close: cover_13
-#    on_release:
-#        cover.stop: cover_13
-  - platform: gpio
-    name: "IN_27"
-    pin:
-      mcp23xxx: mcp_2
-      number: 10
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_14).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_14).is_fully_closed()) {
-                id(cover_14).open();
-              } else {
-                id(cover_14).open();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_14).stop();
-            }      
-#        cover.open: cover_14
-#    on_release:
-#        cover.stop: cover_14
-  - platform: gpio
-    name: "IN_28"
-    pin:
-      mcp23xxx: mcp_2
-      number: 11
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_14).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_14).is_fully_closed()) {
-                id(cover_14).open();
-              } else {
-                id(cover_14).close();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_14).stop();
-            }      
-#        cover.close: cover_14
-#    on_release:
-#        cover.stop: cover_14
-  - platform: gpio
-    name: "IN_29"
-    pin:
-      mcp23xxx: mcp_2
-      number: 12
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_15).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_15).is_fully_closed()) {
-                id(cover_15).open();
-              } else {
-                id(cover_15).open();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_15).stop();
-            }      
-#        cover.open: cover_15
-#    on_release:
-#        cover.stop: cover_15
-  - platform: gpio
-    name: "IN_30"
-    pin:
-      mcp23xxx: mcp_2
-      number: 13
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_15).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_15).is_fully_closed()) {
-                id(cover_15).open();
-              } else {
-                id(cover_15).close();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_15).stop();
-            }      
-#        cover.close: cover_15
-#    on_release:
-#        cover.stop: cover_15
-  - platform: gpio
-    name: "IN_31"
-    pin:
-      mcp23xxx: mcp_2
-      number: 14
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_16).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_16).is_fully_closed()) {
-                id(cover_16).open();
-              } else {
-                id(cover_16).open();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_16).stop();
-            }
-#        - cover.toggle: cover_16
-#      else:
-#        - cover.stop: cover_16
-
-  - platform: gpio
-    name: "IN_32"
-    pin:
-      mcp23xxx: mcp_2
-      number: 15
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-    on_press:
-      then:
-        # logic for cycling through movements: open->stop->close->stop->...
-        - lambda: |
-            if (id(cover_16).current_operation == COVER_OPERATION_IDLE) {
-              // Cover is idle, check current state and either open or close cover.
-              if (id(cover_16).is_fully_closed()) {
-                id(cover_16).open();
-              } else {
-                id(cover_16).close();
-              }
-            } else {
-              // Cover is opening/closing. Stop it.
-              id(cover_16).stop();
-            }
-#        - cover.toggle: cover_16
-#        - cover.stop: cover_16
- 
-
-  - platform: gpio
-    name: "IN_33"
-    pin:
-      number: GPIO33
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-      
-  - platform: gpio
-    name: "IN_34"
-    pin:
-      number: GPIO17
-      mode:
-        input: true
-        pullup: false
-      inverted: true
-      
-  - platform: gpio
-    name: "IN_35"
-    pin:
-      number: GPIO12
-      mode:
-        input: true
-        pullup: true
-      inverted: false
-  
-  - platform: gpio
-    name: "USER_SWITCH"
-    pin: 
-      number: GPIO4
-      mode:
-        input: true
-        pullup: true
-      inverted: true
-    on_press:
-      then:
-        - display.page.show_next: oled_display
-        - component.update: oled_display   
-
-
-
-text_sensor:
-  - platform: template
-    name: ${node_name} Uptime
-    id: wt32_uptime
-    entity_category: diagnostic
-    icon: mdi:clock-start
-  - platform: template
-    name: "${node_name} IP"
-    id: ip_address
-    entity_category: diagnostic
-    icon: "mdi:ip-network"
-    lambda: return { id(eth).get_ip_address().str() };
-    update_interval: 60s
-
-#dallas:
-#  - pin: GPIO32
-
-sensor:
-  - platform: pct2075
-    temperature:
-      id: led_temp
-      name: "${node_name} LM75B Temperature"
-    update_interval: 30s
-  - platform: uptime
-    name: ${node_name} uptime text
-    id: wt32_uptime_sensor
-    update_interval: 60s
-    on_raw_value:
-      then:
-        - text_sensor.template.publish:
-            id: wt32_uptime
-            state: !lambda |-
-              int seconds = round(id(wt32_uptime_sensor).raw_state);
-              int days = seconds / (24 * 3600);
-              seconds = seconds % (24 * 3600);
-              int hours = seconds / 3600;
-              seconds = seconds % 3600;
-              int minutes = seconds /  60;
-              return (
-                (days ? to_string(days) + "d " : "") +
-                (hours ? to_string(hours) + "h " : "") +
-                (to_string(minutes) + "m")
-              ).c_str();
-
-    
-     
-#  - platform: mcp9808
-#    name: "MCP9808 temp"
-#    update_interval: 60s  
-    
-#  - platform: dallas
-#    address: 0x283c01d607d4df28
-#    name: "Dallas Sensor 1"
-    
-#  - platform: dallas
-#    address: 0xdfe67a061e64ff28
-#    name: "Dallas Sensor 2"
-  
-#  - platform: dallas
-#    address: 0xa7a89f071e64ff28
-#    name: "Dallas Sensor 3"
-    
-    
-  - platform: ina219
-    address: 0x40
-    shunt_resistance: 0.1 ohm
-    current:
-      id: ina_current
-      name: "${node_name} INA219 Current"
-    power:
-      id: ina_power
-      name: "${node_name} INA219 Power"
-    bus_voltage:
-      id: ina_bus_voltage
-      name: "${node_name} INA219 Bus Voltage"
-    shunt_voltage:
-      id: ina_shunt_voltage
-      name: "${node_name} INA219 Shunt Voltage"
-    max_voltage: 32.0V
-    max_current: 3.2A
-    update_interval: 30s
-    
-  
-#    pin: GPIO36
-#    name: "ADC_1"
-#    update_interval: 5s
-    
-#  - platform: adc
-#    pin: GPIO39
-#    name: "ADC_2"
-#    update_interval: 5s
-    
-    
-display:
-  - platform: ssd1306_i2c
-    id: oled_display
-    model: "SH1106 128x64"
-    address: 0x3C
-    contrast: 0.5
-    pages:
-      - id: page1
-        lambda: |-
-          it.printf(64,25, id(danube), TextAlign::BASELINE_CENTER, "boneIO");
-          it.printf(64,40, id(fontSmall), TextAlign::BASELINE_CENTER, "take control");
-          it.printf(64,50, id(fontSmall), TextAlign::BASELINE_CENTER, "of your home");
-      - id: page2
-        lambda: |-
-          it.rectangle(0, 0, 126, 15);
-          it.printf(64,12, id(danube1), TextAlign::BASELINE_CENTER, "BoneIO");
-          it.strftime(64, 26, id(fontSmall), TextAlign::BASELINE_CENTER ,"%c", id(ds1307_time).now());
-          it.printf(4, 38, id(fontSmall), TextAlign::BASELINE_LEFT ,"IP addr:");
-          it.printf(124, 38, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%s", id(ip_address).state.c_str());
-          it.printf(4, 50, id(fontSmall), TextAlign::BASELINE_LEFT ,"Uptime:");
-          it.printf(124, 50, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%s", id(wt32_uptime).state.c_str());
-          it.printf(4, 62, id(fontSmall), TextAlign::BASELINE_LEFT ,"Temperature:");
-          it.printf(124, 62, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%.2f°C", id(led_temp).state);
-      - id: page3
-        lambda: |-
-          it.rectangle(0, 0, 126, 15);
-          it.printf(64,12, id(danube1), TextAlign::BASELINE_CENTER, "BoneIO");
-          it.printf(4, 26, id(fontSmall), TextAlign::BASELINE_LEFT ,"Current:");
-          it.printf(124, 26, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%.3fA", id(ina_current).state);
-          it.printf(4, 38, id(fontSmall), TextAlign::BASELINE_LEFT ,"Power:");
-          it.printf(124, 38, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%.2fW", id(ina_power).state);
-          it.printf(4, 50, id(fontSmall), TextAlign::BASELINE_LEFT ,"Bus Volt:");
-          it.printf(124, 50, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_bus_voltage).state);
-          it.printf(4, 62, id(fontSmall), TextAlign::BASELINE_LEFT ,"Shunt Volt:");
-          it.printf(124, 62, id(fontSmall), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_shunt_voltage).state);
-
-font:
-  - file: "fonts/DejaVuSans.ttf"
-    id: fontSmall
-    size: 9
-  - file: "fonts/danube__.ttf"
-    id: danube
-    size: 20
-  - file: "fonts/danube__.ttf"
-    id: danube1
-    size: 9