added ip address and some substitutions

boneio_config_for_esphome_addon.yaml

@@ -1,30 +1,39 @@
 substitutions:
+  # set to false if you don't want mac suffix in your device name
+  name_add_mac_suffix: "true"
+  # if you want to change the name of device via OTA you have to set IP first in boneio/devices/wt32_eth01.yaml 
   node_name: boneio
   dir_name: 'boneio/'
   
+  
+
 packages:
-# devices
+  # select your input board:
+  input: !include  boneio/boards/relay24_inputs_PCF.yaml
+  #input: !include boneio/boards/relay32_inputs_PCF.yaml
+  #input: !include boneio/boards/relay32_inputs_MCP.yaml
+  #input: !include boneio/boards/dimmer_led8x4_inputs.yaml
+  #input: !include boneio/boards/cover16_inputs_MCP.yaml
+  #input: !include boneio/boards/cover16_inputs_PCF.yaml
+  
+  # select your output board:
+  #output: !include boneio/boards/relay24_outputs_MCP.yaml
+  #output: !include boneio/boards/relay32_outputs_PCF.yaml
+  output: !include boneio/boards/relay32_outputs_MCP.yaml
+  #output: !include boneio/boards/dimmer_led8x4_outputs.yaml
+  #light: !include boneio/boards/monochromatic_lights.yaml
+  #cover: !include boneio/boards/cover.yaml
+  #output: !include boneio/boards/cover16_outputs_PCF.yaml
+  #output: !include boneio/boards/cover16_outputs_MCP.yaml
+  
+  # select your devices:
   core: !include boneio/devices/wt32_eth01.yaml
-  internals: !include boneio/devices/boneio_board_PCF.yaml
-  #internals: !include boneio/devices/boneio_board_MCP.yaml
+  internals: !include boneio/devices/boneio_board.yaml
   temp: !include boneio/devices/lm75b.yaml
   display: !include boneio/devices/display.yaml
   # uart: !include devices/uart.yaml
   # one_wire: !include devices/one_wire.yaml
-# relay32
-  output: !include boneio/boards/relay32_outputs_PCF.yaml
-  #output: !include boneio/boards/relay32_outputs_MCP.yaml
-  input: !include boneio/boards/relay32_inputs_PCF.yaml
-    #input: !include boneio/boards/relay32_inputs_MCP.yaml
 
-# dimmer led
-  # output: !include boards/dimmer_led8x4_outputs.yaml
-  # input: !include boards/dimmer_led8x4_inputs.yaml
-  # light: !include boards/monochromatic_lights.yaml
-# cover
-#  output: !include boards/cover16_outputs.yaml
-  # input: !include boards/cover16_inputs.yaml
-# cover: !include boards/cover.yaml
 
 logger:
   baud_rate: 0

devices/wt32_eth01.yaml

@@ -1,13 +1,21 @@
-esphome:
-  name: ${node_name}
-  platform: ESP32
-  board: nodemcu-32s
-
 i2c:
+  - id: bus_a
     sda: GPIO14
     scl: GPIO15
     scan: True
     frequency: 100kHz
+  - id: bus_b
+    sda: GPIO17
+    scl: GPIO33
+    scan: True
+    frequency: 100kHz
+
+esphome:
+  name: ${node_name}
+  platform: ESP32
+  board: nodemcu-32s
+  # set to false if you already added this device to ESPHOME add-on
+  name_add_mac_suffix: ${name_add_mac_suffix}
 
 ethernet:
   id: eth
@@ -17,3 +25,6 @@ ethernet:
   clk_mode: GPIO0_IN
   phy_addr: 1
   power_pin: GPIO16
+
+  # uncomment this line and set your actual IP address before changing name of device
+  # use_address: 172.21.130.57