test for v0.7

devices_v0_7/buzzer.yaml

@@ -0,0 +1,9 @@
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      number: GPIO2
+      mode:
+        output: true
+      inverted: false

devices_v0_7/display.yaml

@@ -0,0 +1,124 @@
+#i2c  address: 0x3C input oled
+sensor:
+  - platform: uptime
+    id: wt32_uptime_seconds
+    update_interval: 60s
+    entity_category: diagnostic
+    on_raw_value:
+      then:
+        - text_sensor.template.publish:
+            id: wt32_uptime
+            state: !lambda |-
+              int seconds = round(id(wt32_uptime_seconds).raw_state);
+              int days = seconds / (24 * 3600);
+              seconds = seconds % (24 * 3600);
+              int hours = seconds / 3600;
+              seconds = seconds % 3600;
+              int minutes = seconds /  60;
+              return (
+                (days ? to_string(days) + "d " : "") +
+                (hours ? to_string(hours) + "h " : "") +
+                (to_string(minutes) + "m")
+              ).c_str();
+
+text_sensor:
+  - platform: template
+    name: Uptime
+    id: wt32_uptime
+    entity_category: diagnostic
+    icon: mdi:clock-start
+
+script:
+  - id: screensaver_script
+    # screensaver script, turn on screensaver after 30 seconds, restart counter each time when invoked
+    mode: restart
+    then:
+      # set the time after which the screensaver will be activated
+      - delay: 30s
+      - display.page.show: screensaver
+      - component.update: oled_display
+
+esphome:
+  on_boot:
+    # by default display show the first page defined in display (which is the logo page) until full initialization
+    # after that we show the first_page and start the screensaver script
+    priority: 0
+    then:
+      - display.page.show: first_page
+      - component.update: oled_display
+      - script.execute: screensaver_script
+
+binary_sensor:
+  - platform: gpio
+    entity_category: config
+    id: boneIO_button
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 7
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        # woke up when on the screensaver, as well do not include the logo page and screensaver in a loop when pushing a button
+        - if:
+            condition:
+              # on the last page go to the first page skipping the screensaver and logo page
+              display.is_displaying_page: last_page
+            then:
+              - display.page.show: first_page
+              - component.update: oled_display
+            else:
+              - if:
+                  condition:
+                    # on the screensaver, show the logo for a while and display the first page
+                    display.is_displaying_page: screensaver
+                  then:
+                    - display.page.show: first_page
+                    - component.update: oled_display
+                  else:
+                    # not the last page and screensaver go to the next page
+                    - display.page.show_next: oled_display
+                    - component.update: oled_display
+          # restart screensaver script
+        - script.execute: screensaver_script
+
+          # it.printf(4, 37, id(roboto_9), TextAlign::BASELINE_LEFT ,"IP addr:");
+          # it.printf(124, 37, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%s", id(eth).get_ip_addresses().str().c_str());
+display:
+  - platform: ssd1306_i2c
+    id: oled_display
+    model: 'SH1106 128x64'
+    address: 0x3C
+    i2c_id: bus_b
+    contrast: 0.5
+    pages:
+      - id: first_page
+        lambda: |-
+          it.rectangle(0, 0, 126, 15);
+          it.printf(64,11, id(roboto_9), TextAlign::BASELINE_CENTER, "BoneIO");
+          it.printf(4, 49, id(roboto_9), TextAlign::BASELINE_LEFT ,"Uptime:");
+          it.printf(124, 49, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%s", id(wt32_uptime).state.c_str());
+          it.printf(4, 61, id(roboto_9), TextAlign::BASELINE_LEFT ,"Temperature:");
+          it.printf(124, 61, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%.2f°C", id(boneIO_temp).state);
+      # additional pages should be defined between the first and last page
+      - id: last_page
+        lambda: |-
+          it.rectangle(0, 0, 126, 15);
+          it.printf(64,11, id(roboto_9), TextAlign::BASELINE_CENTER, "BoneIO");
+          it.printf(4, 25, id(roboto_9), TextAlign::BASELINE_LEFT ,"Current:");
+          it.printf(124, 25, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%.3fA", id(ina_current).state);
+          it.printf(4, 37, id(roboto_9), TextAlign::BASELINE_LEFT ,"Power:");
+          it.printf(124, 37, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%.2fW", id(ina_power).state);
+          it.printf(4, 49, id(roboto_9), TextAlign::BASELINE_LEFT ,"Bus Volt:");
+          it.printf(124, 49, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_bus_voltage).state);
+          it.printf(4, 61, id(roboto_9), TextAlign::BASELINE_LEFT ,"Shunt Volt:");
+          it.printf(124, 61, id(roboto_9), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_shunt_voltage).state);
+      - id: screensaver
+        lambda: |-
+          it.fill(COLOR_OFF);
+
+font:
+  - file: 'gfonts://Roboto'
+    id: roboto_9
+    size: 9

devices_v0_7/i2c.yaml

@@ -0,0 +1,6 @@
+i2c:
+  - id: i2c_bus
+    sda: GPIO17
+    scl: GPIO33
+    scan: True
+    frequency: 400kHz

devices_v0_7/ina219.yaml

@@ -0,0 +1,21 @@
+sensor:
+  # Module power consmption
+  - platform: ina219
+    address: 0x40
+    i2c_id: i2c_bus
+    shunt_resistance: 0.1 ohm
+    current:
+      id: ina_current
+      name: 'INA219 Current'
+    power:
+      id: ina_power
+      name: 'INA219 Power'
+    bus_voltage:
+      id: ina_bus_voltage
+      name: 'INA219 Bus Voltage'
+    shunt_voltage:
+      id: ina_shunt_voltage
+      name: 'INA219 Shunt Voltage'
+    max_voltage: 32.0V
+    max_current: 3.2A
+    update_interval: 30s

devices_v0_7/lm75b.yaml

@@ -0,0 +1,13 @@
+#i2c address: 0x48 output lm75b temp
+#LM75B
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+sensor:
+  # Lower board temperature
+  - platform: lm75
+    id: boneIO_temp
+    name: 'LM75B Temperature'
+    update_interval: 30s
+    i2c_id: i2c_bus

devices_v0_7/one_wire.yaml

@@ -0,0 +1,15 @@
+dallas:
+- pin: GPIO32
+
+# sensor:
+#   - platform: dallas
+#     address: 0x283c01d607d4df28
+#     name: "Dallas Sensor 1"
+#
+#   - platform: dallas
+#     address: 0xdfe67a061e64ff28
+#     name: "Dallas Sensor 2"
+#
+#   - platform: dallas
+#     address: 0xa7a89f071e64ff28
+#     name: "Dallas Sensor 3"

devices_v0_7/pcf.yaml

@@ -0,0 +1,21 @@
+pcf8574:
+  - id: 'pcf_inputs_1to14'
+    i2c_id: bus_a
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_inputs_15to28'
+    i2c_id: bus_a
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: bus_a
+    address: 0x22
+    pcf8575: false
+  - id: 'pcf_right'
+    address: 0x23
+    pcf8575: true
+    i2c_id: bus_b
+  - id: 'pcf_left'
+    address: 0x24
+    pcf8575: true
+    i2c_id: bus_b

devices_v0_7/uart.yaml

@@ -0,0 +1,6 @@
+uart:
+  id: uart_pin3_1
+  rx_pin: GPIO3
+  tx_pin: GPIO1
+  baud_rate: 9600
+  stop_bits: 1