fix yaml validation

.github/workflows/build-firmware.yml

@@ -81,6 +81,13 @@ jobs:
             version_key: "v0.1"
             output_option: "Lights"
             chip_family: "ESP32-S3"
+          - yaml_file: boneio-8x10A_gen2_switches-v0_1.yaml
+            board_name: "boneIO ESP 8x10A gen2"
+            board_value: "8x10A"
+            version: "v0.1"
+            version_key: "v0.1"
+            output_option: "Switches"
+            chip_family: "ESP32-S3"
 
           # 32x10 v0.7
           - yaml_file: boneio-32x10_lights_v0_7.yaml

boneio-8x10A_gen2_lights-v0_1.yaml

@@ -1,22 +1,22 @@
 substitutions:
   name: boneio-8x10a-gen2-01
-  friendly_name: 'boneIO ESP 8x10A Gen2'
+  friendly_name: "boneIO ESP 8x10A Gen2"
-  serial_prefix: 'esp8' #Don't change it.
+  serial_prefix: "esp8" #Don't change it.
-  firmware_manifest: 'https://boneio.eu/fwesp/boneio-8x10a-gen2-01.json'
+  firmware_manifest: "https://boneio.eu/fwesp/boneio-8x10a-gen2-01.json"
 esphome:
-  name: '${name}'
+  name: "${name}"
-  friendly_name: '${friendly_name}'
+  friendly_name: "${friendly_name}"
   name_add_mac_suffix: true
   project:
     name: boneio.8x10a-gen2
-    version: '0.1'
+    version: "0.1"
   on_boot:
     priority: -100
     then:
       - delay: 5s
       - if:
           condition:
-            lambda: 'return id(serial_no) != nullptr;'
+            lambda: "return id(serial_no) != nullptr;"
           then:
             - component.update: serial_no
             - logger.log: "Serial No updated on boot"
@@ -25,7 +25,7 @@ esphome:
 
 esp32:
   board: esp32-s3-devkitc-1
-  framework:                                                                            
+  framework:
     type: esp-idf
 
 ethernet:
@@ -45,8 +45,6 @@ i2c:
   scan: True
   frequency: 400kHz
 
-
-
 output:
   - platform: gpio
     pin: GPIO18
@@ -82,26 +80,23 @@ output:
     inverted: false
     id: out_08
 
-
 # CAN gpio48 - tx, gpio47 rx, gpio35 stb
-# uart:
+uart:
-#   id: boneio_uart
+  id: boneio_uart
-#   rx_pin: GPIO21
+  rx_pin: GPIO21
-#   tx_pin: GPIO14
+  tx_pin: GPIO14
-#   baud_rate: 9600
+  baud_rate: 9600
-#   stop_bits: 1
+  stop_bits: 1
-# modbus:
+modbus:
-#   send_wait_time: 80ms
+  send_wait_time: 80ms
-#   uart_id: boneio_uart
+  uart_id: boneio_uart
-#   id: boneio_modbus
+  id: boneio_modbus
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
     ref: packages-v2.0.0
-    files: [
+    files: ["packages/devices/serial_no.yaml"]
-        'packages/devices/serial_no.yaml',
-      ]
   # boneiopackages:
   #   url: https://github.com/boneIO-eu/esphome_packages
   #   ref: main
@@ -114,7 +109,7 @@ dashboard_import:
   import_full_config: true
 
 pcf8574:
-  - id: 'pcf_inputs'
+  - id: "pcf_inputs"
     address: 0x38
 
 logger:
@@ -130,39 +125,38 @@ web_server:
   version: 3
   local: true
 
-
 light:
   - platform: binary
     output: out_01
-    name: 'OUT 01'
+    name: "OUT 01"
     id: light_01
   - platform: binary
     output: out_02
-    name: 'OUT 02'
+    name: "OUT 02"
     id: light_02
   - platform: binary
     output: out_03
-    name: 'OUT 03'
+    name: "OUT 03"
     id: light_03
   - platform: binary
     output: out_04
-    name: 'OUT 04'
+    name: "OUT 04"
     id: light_04
   - platform: binary
     output: out_05
-    name: 'OUT 05'
+    name: "OUT 05"
     id: light_05
   - platform: binary
     output: out_06
-    name: 'OUT 06'
+    name: "OUT 06"
     id: light_06
   - platform: binary
     output: out_07
-    name: 'OUT 07'
+    name: "OUT 07"
     id: light_07
   - platform: binary
     output: out_08
-    name: 'OUT 08'
+    name: "OUT 08"
     id: light_08
 
 debug:
@@ -171,7 +165,7 @@ debug:
 sensor:
   - platform: lm75b
     id: boneIO_temp
-    name: 'Temperature'
+    name: "Temperature"
     update_interval: 30s
     entity_category: diagnostic
     on_value_range:
@@ -185,7 +179,7 @@ sensor:
 switch:
   - platform: gpio
     id: buzzer
-    name: 'Buzzer'
+    name: "Buzzer"
     pin:
       number: GPIO9
       mode:
@@ -193,7 +187,7 @@ switch:
       inverted: false
   - platform: gpio
     id: can_bus_switch
-    name: 'CAN Bus Switch'
+    name: "CAN Bus Switch"
     pin:
       number: GPIO35
       mode:
@@ -202,7 +196,7 @@ switch:
 
 binary_sensor:
   - platform: gpio
-    name: 'IN_01'
+    name: "IN_01"
     id: in_01
     pin:
       pcf8574: pcf_inputs
@@ -215,7 +209,7 @@ binary_sensor:
         - light.toggle: light_01
 
   - platform: gpio
-    name: 'IN_02'
+    name: "IN_02"
     id: in_02
     pin:
       pcf8574: pcf_inputs
@@ -228,7 +222,7 @@ binary_sensor:
         - light.toggle: light_02
 
   - platform: gpio
-    name: 'IN_03'
+    name: "IN_03"
     id: in_03
     pin:
       pcf8574: pcf_inputs
@@ -241,7 +235,7 @@ binary_sensor:
         - light.toggle: light_03
 
   - platform: gpio
-    name: 'IN_04'
+    name: "IN_04"
     id: in_04
     pin:
       pcf8574: pcf_inputs
@@ -254,7 +248,7 @@ binary_sensor:
         - light.toggle: light_04
 
   - platform: gpio
-    name: 'IN_05'
+    name: "IN_05"
     id: in_05
     pin:
       pcf8574: pcf_inputs
@@ -267,7 +261,7 @@ binary_sensor:
         - light.toggle: light_05
 
   - platform: gpio
-    name: 'IN_06'
+    name: "IN_06"
     id: in_06
     pin:
       pcf8574: pcf_inputs
@@ -280,7 +274,7 @@ binary_sensor:
         - light.toggle: light_06
 
   - platform: gpio
-    name: 'IN_07'
+    name: "IN_07"
     id: in_07
     pin:
       pcf8574: pcf_inputs
@@ -293,7 +287,7 @@ binary_sensor:
         - light.toggle: light_07
 
   - platform: gpio
-    name: 'IN_08'
+    name: "IN_08"
     id: in_08
     pin:
       pcf8574: pcf_inputs
@@ -303,4 +297,4 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - light.toggle: light_08
+        - light.toggle: light_08

boneio-8x10A_gen2_switches-v0_1.yaml

@@ -0,0 +1,298 @@
+substitutions:
+  name: boneio-8x10a-gen2-sw-01
+  friendly_name: "boneIO ESP 8x10A Gen2"
+  serial_prefix: "esp8" #Don't change it.
+  firmware_manifest: "https://boneio.eu/fwesp/boneio-8x10a-gen2-sw-01.json"
+esphome:
+  name: "${name}"
+  friendly_name: "${friendly_name}"
+  name_add_mac_suffix: true
+  project:
+    name: boneio.8x10a-gen2
+    version: "0.1"
+  on_boot:
+    priority: -100
+    then:
+      - delay: 5s
+      - if:
+          condition:
+            lambda: "return id(serial_no) != nullptr;"
+          then:
+            - component.update: serial_no
+            - logger.log: "Serial No updated on boot"
+          else:
+            - logger.log: "Serial No component not found"
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: esp-idf
+
+ethernet:
+  id: eth
+  type: W5500
+  clk_pin: GPIO13
+  mosi_pin: GPIO39
+  miso_pin: GPIO38
+  cs_pin: GPIO12
+  interrupt_pin: GPIO2
+  reset_pin: GPIO1
+  clock_speed: 25MHz
+
+i2c:
+  sda: GPIO10
+  scl: GPIO11
+  scan: True
+  frequency: 400kHz
+
+output:
+  - platform: gpio
+    pin: GPIO18
+    inverted: false
+    id: out_01
+  - platform: gpio
+    pin: GPIO17
+    inverted: false
+    id: out_02
+  - platform: gpio
+    pin: GPIO16
+    inverted: false
+    id: out_03
+  - platform: gpio
+    pin: GPIO15
+    inverted: false
+    id: out_04
+
+  - platform: gpio
+    pin: GPIO7
+    inverted: false
+    id: out_05
+  - platform: gpio
+    pin: GPIO6
+    inverted: false
+    id: out_06
+  - platform: gpio
+    pin: GPIO5
+    inverted: false
+    id: out_07
+  - platform: gpio
+    pin: GPIO4
+    inverted: false
+    id: out_08
+
+# CAN gpio48 - tx, gpio47 rx, gpio35 stb
+uart:
+  id: boneio_uart
+  rx_pin: GPIO21
+  tx_pin: GPIO14
+  baud_rate: 9600
+  stop_bits: 1
+modbus:
+  send_wait_time: 80ms
+  uart_id: boneio_uart
+  id: boneio_modbus
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: packages-v2.0.0
+    files: ["packages/devices/serial_no.yaml"]
+  # boneiopackages:
+  #   url: https://github.com/boneIO-eu/esphome_packages
+  #   ref: main
+  #   refresh: 1min
+  #   files:
+  #     - path: sdm630.yaml
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-8x10A_gen2_switches-v0_1.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: "pcf_inputs"
+    address: 0x38
+
+logger:
+  hardware_uart: UART0
+api:
+  reboot_timeout: 0s
+ota:
+  - platform: esphome
+  - platform: web_server
+
+web_server:
+  port: 80
+  version: 3
+  local: true
+
+switch:
+  - platform: output
+    output: out_01
+    name: "OUT 01"
+    id: switch_01
+  - platform: output
+    output: out_02
+    name: "OUT 02"
+    id: switch_02
+  - platform: output
+    output: out_03
+    name: "OUT 03"
+    id: switch_03
+  - platform: output
+    output: out_04
+    name: "OUT 04"
+    id: switch_04
+  - platform: output
+    output: out_05
+    name: "OUT 05"
+    id: switch_05
+  - platform: output
+    output: out_06
+    name: "OUT 06"
+    id: switch_06
+  - platform: output
+    output: out_07
+    name: "OUT 07"
+    id: switch_07
+  - platform: output
+    output: out_08
+    name: "OUT 08"
+    id: switch_08
+  - platform: gpio
+    id: buzzer
+    name: "Buzzer"
+    pin:
+      number: GPIO9
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    id: can_bus_switch
+    name: "CAN Bus Switch"
+    pin:
+      number: GPIO35
+      mode:
+        output: true
+      inverted: false
+
+debug:
+  update_interval: 15s
+
+sensor:
+  - platform: lm75b
+    id: boneIO_temp
+    name: "Temperature"
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+binary_sensor:
+  - platform: gpio
+    name: "IN_01"
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_01
+
+  - platform: gpio
+    name: "IN_02"
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_02
+
+  - platform: gpio
+    name: "IN_03"
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_03
+
+  - platform: gpio
+    name: "IN_04"
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_04
+
+  - platform: gpio
+    name: "IN_05"
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_05
+
+  - platform: gpio
+    name: "IN_06"
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_06
+
+  - platform: gpio
+    name: "IN_07"
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_07
+
+  - platform: gpio
+    name: "IN_08"
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs
+      number: 7
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_08

boneio-dimmer_gen2_2rgbw-v0_1.yaml

@@ -1,22 +1,22 @@
 substitutions:
   name: boneio-dr-gen2-2rgbw-01
-  friendly_name: 'BoneIO Dimmer Gen2'
+  friendly_name: "BoneIO Dimmer Gen2"
-  serial_prefix: 'dim2' #Don't change it.
+  serial_prefix: "dim2" #Don't change it.
-  firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-2rgbw-01.json'
+  firmware_manifest: "https://boneio.eu/fwesp/boneio-dr-gen2-2rgbw-01.json"
 esphome:
-  name: '${name}'
+  name: "${name}"
-  friendly_name: '${friendly_name}'
+  friendly_name: "${friendly_name}"
   name_add_mac_suffix: true
   project:
     name: boneio.dimmer-led-gen2
-    version: '0.1'
+    version: "0.1"
   on_boot:
     priority: -100
     then:
       - delay: 5s
       - if:
           condition:
-            lambda: 'return id(serial_no) != nullptr;'
+            lambda: "return id(serial_no) != nullptr;"
           then:
             - component.update: serial_no
             - logger.log: "Serial No updated on boot"
@@ -25,7 +25,7 @@ esphome:
 
 esp32:
   board: esp32-s3-devkitc-1
-  framework:                                                                            
+  framework:
     type: esp-idf
 
 ethernet:
@@ -45,8 +45,6 @@ i2c:
   scan: True
   frequency: 400kHz
 
-
-
 output:
   - platform: ledc
     pin: GPIO18
@@ -90,26 +88,23 @@ output:
     inverted: false
     id: chr04
 
-
 # CAN gpio48 - tx, gpio47 rx, gpio35 stb
-# uart:
+uart:
-#   id: boneio_uart
+  id: boneio_uart
-#   rx_pin: GPIO21
+  rx_pin: GPIO21
-#   tx_pin: GPIO14
+  tx_pin: GPIO14
-#   baud_rate: 9600
+  baud_rate: 9600
-#   stop_bits: 1
+  stop_bits: 1
-# modbus:
+modbus:
-#   send_wait_time: 80ms
+  send_wait_time: 80ms
-#   uart_id: boneio_uart
+  uart_id: boneio_uart
-#   id: boneio_modbus
+  id: boneio_modbus
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
     ref: packages-v2.0.0
-    files: [
+    files: ["packages/devices/serial_no.yaml"]
-        'packages/devices/serial_no.yaml',
-      ]
   # boneiopackages:
   #   url: https://github.com/boneIO-eu/esphome_packages
   #   ref: main
@@ -122,7 +117,7 @@ dashboard_import:
   import_full_config: true
 
 pcf8574:
-  - id: 'pcf_inputs'
+  - id: "pcf_inputs"
     address: 0x38
 
 logger:
@@ -138,11 +133,10 @@ web_server:
   version: 3
   local: true
 
-
 light:
   - platform: rgbw
     id: rgbw_l
-    name: 'RGBW L'
+    name: "RGBW L"
     red: chl01
     green: chl02
     blue: chl03
@@ -151,7 +145,7 @@ light:
     gamma_correct: 0
   - platform: rgbw
     id: rgbw_r
-    name: 'RGBW R'
+    name: "RGBW R"
     red: chr01
     green: chr02
     blue: chr03
@@ -172,7 +166,7 @@ sensor:
       name: "Loop Time"
   - platform: lm75b
     id: boneIO_temp
-    name: 'Temperature'
+    name: "Temperature"
     update_interval: 30s
     entity_category: diagnostic
     on_value_range:
@@ -186,7 +180,7 @@ sensor:
 switch:
   - platform: gpio
     id: buzzer
-    name: 'Buzzer'
+    name: "Buzzer"
     pin:
       number: GPIO9
       mode:
@@ -194,7 +188,7 @@ switch:
       inverted: false
   - platform: gpio
     id: can_bus_switch
-    name: 'CAN Bus Switch'
+    name: "CAN Bus Switch"
     pin:
       number: GPIO35
       mode:
@@ -203,7 +197,7 @@ switch:
 
 binary_sensor:
   - platform: gpio
-    name: 'IN_01'
+    name: "IN_01"
     id: in_01
     pin:
       pcf8574: pcf_inputs
@@ -213,7 +207,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_02'
+    name: "IN_02"
     id: in_02
     pin:
       pcf8574: pcf_inputs
@@ -223,7 +217,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_03'
+    name: "IN_03"
     id: in_03
     pin:
       pcf8574: pcf_inputs
@@ -233,7 +227,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_04'
+    name: "IN_04"
     id: in_04
     pin:
       pcf8574: pcf_inputs
@@ -243,7 +237,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_05'
+    name: "IN_05"
     id: in_05
     pin:
       pcf8574: pcf_inputs
@@ -253,7 +247,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_06'
+    name: "IN_06"
     id: in_06
     pin:
       pcf8574: pcf_inputs
@@ -263,7 +257,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_07'
+    name: "IN_07"
     id: in_07
     pin:
       pcf8574: pcf_inputs
@@ -273,11 +267,11 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_08'
+    name: "IN_08"
     id: in_08
     pin:
       pcf8574: pcf_inputs
       number: 7
       mode:
         input: true
-      inverted: true
+      inverted: true

boneio-dimmer_gen2_4cct-v0_1.yaml

@@ -1,22 +1,22 @@
 substitutions:
   name: boneio-dr-gen2-4cct-01
-  friendly_name: 'BoneIO Dimmer Gen2'
+  friendly_name: "BoneIO Dimmer Gen2"
-  serial_prefix: 'dim2' #Don't change it.
+  serial_prefix: "dim2" #Don't change it.
-  firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-4cct-01.json'
+  firmware_manifest: "https://boneio.eu/fwesp/boneio-dr-gen2-4cct-01.json"
 esphome:
-  name: '${name}'
+  name: "${name}"
-  friendly_name: '${friendly_name}'
+  friendly_name: "${friendly_name}"
   name_add_mac_suffix: true
   project:
     name: boneio.dimmer-led-gen2
-    version: '0.1'
+    version: "0.1"
   on_boot:
     priority: -100
     then:
       - delay: 5s
       - if:
           condition:
-            lambda: 'return id(serial_no) != nullptr;'
+            lambda: "return id(serial_no) != nullptr;"
           then:
             - component.update: serial_no
             - logger.log: "Serial No updated on boot"
@@ -25,7 +25,7 @@ esphome:
 
 esp32:
   board: esp32-s3-devkitc-1
-  framework:                                                                            
+  framework:
     type: esp-idf
 
 ethernet:
@@ -45,8 +45,6 @@ i2c:
   scan: True
   frequency: 400kHz
 
-
-
 output:
   - platform: ledc
     pin: GPIO18
@@ -90,26 +88,23 @@ output:
     inverted: false
     id: chr04
 
-
 # CAN gpio48 - tx, gpio47 rx, gpio35 stb
-# uart:
+uart:
-#   id: boneio_uart
+  id: boneio_uart
-#   rx_pin: GPIO21
+  rx_pin: GPIO21
-#   tx_pin: GPIO14
+  tx_pin: GPIO14
-#   baud_rate: 9600
+  baud_rate: 9600
-#   stop_bits: 1
+  stop_bits: 1
-# modbus:
+modbus:
-#   send_wait_time: 80ms
+  send_wait_time: 80ms
-#   uart_id: boneio_uart
+  uart_id: boneio_uart
-#   id: boneio_modbus
+  id: boneio_modbus
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
     ref: packages-v2.0.0
-    files: [
+    files: ["packages/devices/serial_no.yaml"]
-        'packages/devices/serial_no.yaml',
-      ]
   # boneiopackages:
   #   url: https://github.com/boneIO-eu/esphome_packages
   #   ref: main
@@ -122,7 +117,7 @@ dashboard_import:
   import_full_config: true
 
 pcf8574:
-  - id: 'pcf_inputs'
+  - id: "pcf_inputs"
     address: 0x38
 
 logger:
@@ -138,30 +133,29 @@ web_server:
   version: 3
   local: true
 
-
 light:
   - platform: cwww
-    name: 'CHL_01_02'
+    name: "CHL_01_02"
     cold_white: chl01
     warm_white: chl02
     cold_white_color_temperature: 6536 K
     warm_white_color_temperature: 2000 K
   - platform: cwww
-    name: 'CHL_03_04'
+    name: "CHL_03_04"
     cold_white: chl03
     warm_white: chl04
     cold_white_color_temperature: 6536 K
     warm_white_color_temperature: 2000 K
 
   - platform: cwww
-    name: 'CHR_01_02'
+    name: "CHR_01_02"
     cold_white: chr01
     warm_white: chr02
     cold_white_color_temperature: 6536 K
     warm_white_color_temperature: 2000 K
 
   - platform: cwww
-    name: 'CHR_03_04'
+    name: "CHR_03_04"
     cold_white: chr03
     warm_white: chr04
     cold_white_color_temperature: 6536 K
@@ -180,7 +174,7 @@ sensor:
       name: "Loop Time"
   - platform: lm75b
     id: boneIO_temp
-    name: 'Temperature'
+    name: "Temperature"
     update_interval: 30s
     entity_category: diagnostic
     on_value_range:
@@ -194,7 +188,7 @@ sensor:
 switch:
   - platform: gpio
     id: buzzer
-    name: 'Buzzer'
+    name: "Buzzer"
     pin:
       number: GPIO9
       mode:
@@ -202,7 +196,7 @@ switch:
       inverted: false
   - platform: gpio
     id: can_bus_switch
-    name: 'CAN Bus Switch'
+    name: "CAN Bus Switch"
     pin:
       number: GPIO35
       mode:
@@ -211,7 +205,7 @@ switch:
 
 binary_sensor:
   - platform: gpio
-    name: 'IN_01'
+    name: "IN_01"
     id: in_01
     pin:
       pcf8574: pcf_inputs
@@ -221,7 +215,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_02'
+    name: "IN_02"
     id: in_02
     pin:
       pcf8574: pcf_inputs
@@ -231,7 +225,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_03'
+    name: "IN_03"
     id: in_03
     pin:
       pcf8574: pcf_inputs
@@ -241,7 +235,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_04'
+    name: "IN_04"
     id: in_04
     pin:
       pcf8574: pcf_inputs
@@ -251,7 +245,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_05'
+    name: "IN_05"
     id: in_05
     pin:
       pcf8574: pcf_inputs
@@ -261,7 +255,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_06'
+    name: "IN_06"
     id: in_06
     pin:
       pcf8574: pcf_inputs
@@ -271,7 +265,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_07'
+    name: "IN_07"
     id: in_07
     pin:
       pcf8574: pcf_inputs
@@ -281,11 +275,11 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_08'
+    name: "IN_08"
     id: in_08
     pin:
       pcf8574: pcf_inputs
       number: 7
       mode:
         input: true
-      inverted: true
+      inverted: true

boneio-dimmer_gen2_8ch-v0_1.yaml

@@ -1,22 +1,22 @@
 substitutions:
   name: boneio-dr-gen2-8ch-01
-  friendly_name: 'BoneIO Dimmer Gen2'
+  friendly_name: "BoneIO Dimmer Gen2"
-  serial_prefix: 'dim2' #Don't change it.
+  serial_prefix: "dim2" #Don't change it.
-  firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-8ch-01.json'
+  firmware_manifest: "https://boneio.eu/fwesp/boneio-dr-gen2-8ch-01.json"
 esphome:
-  name: '${name}'
+  name: "${name}"
-  friendly_name: '${friendly_name}'
+  friendly_name: "${friendly_name}"
   name_add_mac_suffix: true
   project:
     name: boneio.dimmer-led-gen2
-    version: '0.1'
+    version: "0.1"
   on_boot:
     priority: -100
     then:
       - delay: 5s
       - if:
           condition:
-            lambda: 'return id(serial_no) != nullptr;'
+            lambda: "return id(serial_no) != nullptr;"
           then:
             - component.update: serial_no
             - logger.log: "Serial No updated on boot"
@@ -25,7 +25,7 @@ esphome:
 
 esp32:
   board: esp32-s3-devkitc-1
-  framework:                                                                            
+  framework:
     type: esp-idf
 
 ethernet:
@@ -45,8 +45,6 @@ i2c:
   scan: True
   frequency: 400kHz
 
-
-
 output:
   - platform: ledc
     pin: GPIO18
@@ -90,26 +88,23 @@ output:
     inverted: false
     id: chr04
 
-
 # CAN gpio48 - tx, gpio47 rx, gpio35 stb
-# uart:
+uart:
-#   id: boneio_uart
+  id: boneio_uart
-#   rx_pin: GPIO21
+  rx_pin: GPIO21
-#   tx_pin: GPIO14
+  tx_pin: GPIO14
-#   baud_rate: 9600
+  baud_rate: 9600
-#   stop_bits: 1
+  stop_bits: 1
-# modbus:
+modbus:
-#   send_wait_time: 80ms
+  send_wait_time: 80ms
-#   uart_id: boneio_uart
+  uart_id: boneio_uart
-#   id: boneio_modbus
+  id: boneio_modbus
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
     ref: packages-v2.0.0
-    files: [
+    files: ["packages/devices/serial_no.yaml"]
-        'packages/devices/serial_no.yaml',
-      ]
   # boneiopackages:
   #   url: https://github.com/boneIO-eu/esphome_packages
   #   ref: main
@@ -122,7 +117,7 @@ dashboard_import:
   import_full_config: true
 
 pcf8574:
-  - id: 'pcf_inputs'
+  - id: "pcf_inputs"
     address: 0x38
 
 logger:
@@ -138,54 +133,53 @@ web_server:
   version: 3
   local: true
 
-
 light:
   - platform: monochromatic
     output: chl01
-    name: 'CHL 01'
+    name: "CHL 01"
     id: chl_01
     default_transition_length: 2s
     gamma_correct: 0
   - platform: monochromatic
     output: chl02
-    name: 'CHL 02'
+    name: "CHL 02"
     id: chl_02
     default_transition_length: 2s
     gamma_correct: 0
   - platform: monochromatic
     output: chl03
-    name: 'CHL 03'
+    name: "CHL 03"
     id: chl_03
     default_transition_length: 2s
     gamma_correct: 0
   - platform: monochromatic
     output: chl04
-    name: 'CHL 04'
+    name: "CHL 04"
     id: chl_04
     default_transition_length: 2s
     gamma_correct: 0
 
   - platform: monochromatic
     output: chr01
-    name: 'CHR 01'
+    name: "CHR 01"
     id: chr_01
     default_transition_length: 2s
     gamma_correct: 0
   - platform: monochromatic
     output: chr02
-    name: 'CHR 02'
+    name: "CHR 02"
     id: chr_02
     default_transition_length: 2s
     gamma_correct: 0
   - platform: monochromatic
     output: chr03
-    name: 'CHR 03'
+    name: "CHR 03"
     id: chr_03
     default_transition_length: 2s
     gamma_correct: 0
   - platform: monochromatic
     output: chr04
-    name: 'CHR 04'
+    name: "CHR 04"
     id: chr_04
     default_transition_length: 2s
     gamma_correct: 0
@@ -203,7 +197,7 @@ sensor:
       name: "Loop Time"
   - platform: lm75b
     id: boneIO_temp
-    name: 'Temperature'
+    name: "Temperature"
     update_interval: 30s
     entity_category: diagnostic
     on_value_range:
@@ -217,7 +211,7 @@ sensor:
 switch:
   - platform: gpio
     id: buzzer
-    name: 'Buzzer'
+    name: "Buzzer"
     pin:
       number: GPIO9
       mode:
@@ -225,7 +219,7 @@ switch:
       inverted: false
   - platform: gpio
     id: can_bus_switch
-    name: 'CAN Bus Switch'
+    name: "CAN Bus Switch"
     pin:
       number: GPIO35
       mode:
@@ -234,7 +228,7 @@ switch:
 
 binary_sensor:
   - platform: gpio
-    name: 'IN_01'
+    name: "IN_01"
     id: in_01
     pin:
       pcf8574: pcf_inputs
@@ -244,7 +238,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_02'
+    name: "IN_02"
     id: in_02
     pin:
       pcf8574: pcf_inputs
@@ -254,7 +248,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_03'
+    name: "IN_03"
     id: in_03
     pin:
       pcf8574: pcf_inputs
@@ -264,7 +258,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_04'
+    name: "IN_04"
     id: in_04
     pin:
       pcf8574: pcf_inputs
@@ -274,7 +268,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_05'
+    name: "IN_05"
     id: in_05
     pin:
       pcf8574: pcf_inputs
@@ -284,7 +278,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_06'
+    name: "IN_06"
     id: in_06
     pin:
       pcf8574: pcf_inputs
@@ -294,7 +288,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_07'
+    name: "IN_07"
     id: in_07
     pin:
       pcf8574: pcf_inputs
@@ -304,11 +298,11 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: 'IN_08'
+    name: "IN_08"
     id: in_08
     pin:
       pcf8574: pcf_inputs
       number: 7
       mode:
         input: true
-      inverted: true
+      inverted: true

boneio-input24_gen2-v0_1.yaml

@@ -46,16 +46,16 @@ i2c:
   frequency: 400kHz
 
 # CAN gpio48 - tx, gpio47 rx, gpio35 stb
-# uart:
+uart:
-#   id: boneio_uart
+  id: boneio_uart
-#   rx_pin: GPIO21
+  rx_pin: GPIO21
-#   tx_pin: GPIO14
+  tx_pin: GPIO14
-#   baud_rate: 9600
+  baud_rate: 9600
-#   stop_bits: 1
+  stop_bits: 1
-# modbus:
+modbus:
-#   send_wait_time: 80ms
+  send_wait_time: 80ms
-#   uart_id: boneio_uart
+  uart_id: boneio_uart
-#   id: boneio_modbus
+  id: boneio_modbus
 
 packages:
   internals_packages: