starred/esphome
1
0
Fork 0
mirror of https://github.com/boneIO-eu/esphome.git synced 2026-04-10 20:50:02 +02:00
Code Issues Packages Projects Releases 10 Wiki Activity

Move uart and modbus to main file

Browse Source
This commit is contained in:
pszafer
2024-05-23 20:11:00 +02:00
parent 1befa8554a
commit 8412fb6fe5
15 changed files with 289 additions and 68 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
boneio-24x16_switches_v0_5-v0_6.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_5-v0_6/display.yaml', 'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
'devices_v0_5-v0_6/pcf_with_mcp.yaml', 'devices_v0_5-v0_6/pcf_with_mcp.yaml',
'boards/24x16_output.yaml', 'boards/24x16_output.yaml',
# 'devices_v0_5-v0_6/one_wire.yaml', # 'devices_v0_5-v0_6/one_wire.yaml',
# 'devices_v0_5-v0_6/uart.yaml',
] ]
logger: logger:
@@ -576,3 +575,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin3_1
# rx_pin: GPIO3
# tx_pin: GPIO1
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-24x16_switches_v0_7.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_7/display.yaml', 'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
'devices_v0_7/pcf_with_mcp.yaml', 'devices_v0_7/pcf_with_mcp.yaml',
'boards/24x16_output.yaml', 'boards/24x16_output.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
# 'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -572,3 +571,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin14_15
# rx_pin: GPIO14
# tx_pin: GPIO15
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-32x10_lights_v0_5-v0_6.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_5-v0_6/display.yaml', 'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
'devices_v0_5-v0_6/pcf.yaml', 'devices_v0_5-v0_6/pcf.yaml',
'boards/32x10_output.yaml', 'boards/32x10_output.yaml',
# 'devices_v0_5-v0_6/one_wire.yaml', # 'devices_v0_5-v0_6/one_wire.yaml',
# 'devices_v0_5-v0_6/uart.yaml',
] ]
logger: logger:
@@ -633,3 +632,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin3_1
# rx_pin: GPIO3
# tx_pin: GPIO1
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

45
boneio-32x10_lights_v0_7.yaml
View File

@@ -23,31 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
import_full_config: true import_full_config: true
modbus:
send_wait_time: 200ms
uart_id: uart_pin14_15
id: mod_bus
modbus_controller:
- id: sofarsolar
address: 0x09
modbus_id: mod_bus
setup_priority: -10
update_interval: 15s
packages: packages:
# extra_boneio_package:
# url: github://boneIO-eu/esphome-packages
# file: sofar-inverter-ktl.yaml
# vars:
# sofar_modbus_id: sofarsolar
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_7/display.yaml', 'devices_v0_7/display.yaml',
@@ -57,7 +39,6 @@ packages:
'devices_v0_7/pcf.yaml', 'devices_v0_7/pcf.yaml',
'boards/32x10_output.yaml', 'boards/32x10_output.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -647,3 +628,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin14_15
# rx_pin: GPIO14
# tx_pin: GPIO15
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-32x10_switches_v0_5-v0_6.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_5-v0_6/display.yaml', 'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
'devices_v0_5-v0_6/pcf.yaml', 'devices_v0_5-v0_6/pcf.yaml',
'boards/32x10_output.yaml', 'boards/32x10_output.yaml',
# 'devices_v0_5-v0_6/one_wire.yaml', # 'devices_v0_5-v0_6/one_wire.yaml',
# 'devices_v0_5-v0_6/uart.yaml',
] ]
logger: logger:
@@ -632,3 +631,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin3_1
# rx_pin: GPIO3
# tx_pin: GPIO1
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-32x10_switches_v0_7.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_7/display.yaml', 'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
'devices_v0_7/pcf.yaml', 'devices_v0_7/pcf.yaml',
'boards/32x10_output.yaml', 'boards/32x10_output.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
# 'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -628,3 +627,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin14_15
# rx_pin: GPIO14
# tx_pin: GPIO15
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-cover_mix_lights_v0_5-v0_6.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_5-v0_6/display.yaml', 'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
'devices_v0_5-v0_6/pcf.yaml', 'devices_v0_5-v0_6/pcf.yaml',
'boards/8_covers_16_output.yaml', 'boards/8_covers_16_output.yaml',
# 'devices_v0_5-v0_6/one_wire.yaml', # 'devices_v0_5-v0_6/one_wire.yaml',
# 'devices_v0_5-v0_6/uart.yaml',
] ]
logger: logger:
@@ -737,3 +736,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin3_1
# rx_pin: GPIO3
# tx_pin: GPIO1
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-cover_mix_lights_v0_7.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_7/display.yaml', 'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
'devices_v0_7/pcf.yaml', 'devices_v0_7/pcf.yaml',
'boards/8_covers_16_output.yaml', 'boards/8_covers_16_output.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
# 'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -733,3 +732,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin14_15
# rx_pin: GPIO14
# tx_pin: GPIO15
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-cover_mix_switches_v0_5-v0_6.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_5-v0_6/display.yaml', 'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
'devices_v0_5-v0_6/pcf.yaml', 'devices_v0_5-v0_6/pcf.yaml',
'boards/8_covers_16_output.yaml', 'boards/8_covers_16_output.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
# 'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -736,3 +735,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin3_1
# rx_pin: GPIO3
# tx_pin: GPIO1
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-cover_mix_switches_v0_7.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_7/display.yaml', 'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
'devices_v0_7/pcf.yaml', 'devices_v0_7/pcf.yaml',
'boards/8_covers_16_output.yaml', 'boards/8_covers_16_output.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
# 'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -733,3 +732,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin14_15
# rx_pin: GPIO14
# tx_pin: GPIO15
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-cover_v0_5-v0_6.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_5-v0_6/display.yaml', 'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
'devices_v0_5-v0_6/pcf.yaml', 'devices_v0_5-v0_6/pcf.yaml',
'boards/16_cover_pcf.yaml', 'boards/16_cover_pcf.yaml',
# 'devices_v0_5-v0_6/one_wire.yaml', # 'devices_v0_5-v0_6/one_wire.yaml',
# 'devices_v0_5-v0_6/uart.yaml',
] ]
logger: logger:
@@ -839,3 +838,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin3_1
# rx_pin: GPIO3
# tx_pin: GPIO1
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

27
boneio-cover_v0_7.yaml
View File

@@ -23,13 +23,13 @@ ethernet:
power_pin: GPIO16 power_pin: GPIO16
dashboard_import: dashboard_import:
package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.5 package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
import_full_config: true import_full_config: true
packages: packages:
internals_packages: internals_packages:
url: https://github.com/boneIO-eu/esphome url: https://github.com/boneIO-eu/esphome
ref: v1.0.5 ref: v1.0.15
files: [ files: [
'devices/buzzer.yaml', 'devices/buzzer.yaml',
'devices_v0_7/display.yaml', 'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
'devices_v0_7/pcf.yaml', 'devices_v0_7/pcf.yaml',
'boards/16_cover_pcf.yaml', 'boards/16_cover_pcf.yaml',
# 'devices_v0_7/one_wire.yaml', # 'devices_v0_7/one_wire.yaml',
# 'devices_v0_7/uart.yaml',
] ]
logger: logger:
@@ -835,3 +834,25 @@ binary_sensor:
mode: mode:
input: true input: true
inverted: true inverted: true
######################
### MODBUS SECTION ###
######################
# UNCOMMENT BELOW TO USE MODBUS
# uart:
# id: uart_pin14_15
# rx_pin: GPIO14
# tx_pin: GPIO15
# baud_rate: 9600
# stop_bits: 1
# modbus:
# send_wait_time: 200ms
# uart_id: uart_pin14_15
# id: boneio_modbus
# modbus_controller:
# - id: YOURDEVICE ID
# address: 0x09
# modbus_id: mod_bus
# setup_priority: -10
# update_interval: 60s

6
devices_v0_5-v0_6/uart.yaml
View File

@@ -1,6 +0,0 @@
uart:
id: uart_pin3_1
rx_pin: GPIO3
tx_pin: GPIO1
baud_rate: 9600
stop_bits: 1

3
devices_v0_7/one_wire.yaml
View File

@@ -1,6 +1,5 @@
dallas: dallas:
- pin: GPIO32 - pin: GPIO32
# sensor: # sensor:
# - platform: dallas # - platform: dallas
# address: 0x283c01d607d4df28 # address: 0x283c01d607d4df28

6
devices_v0_7/uart.yaml
View File

@@ -1,6 +0,0 @@
uart:
id: uart_pin14_15
rx_pin: GPIO14
tx_pin: GPIO15
baud_rate: 9600
stop_bits: 1