added ip address and some substitutions

boneio_config_for_esphome_addon.yaml

@@ -1,33 +1,39 @@
 substitutions:
-  node_name: boneio
+  # set to false if you don't want mac suffix in your device name
+  name_add_mac_suffix: "false"
+  # if you want to change the name of device via OTA you have to set IP first in boneio/devices/wt32_eth01.yaml 
+  node_name: boneio-4
   dir_name: 'boneio/'
   
+  
+
 packages:
-  # devices
+  # select your input board:
+  # input: !include boneio/boards/relay24_inputs_PCF.yaml
+  # input: !include boneio/boards/relay32_inputs_PCF.yaml
+  # input: !include boneio/boards/relay32_inputs_MCP.yaml
+  # input: !include boneio/boards/dimmer_led8x4_inputs.yaml
+  # input: !include boneio/boards/cover16_inputs_MCP.yaml
+  # input: !include boneio/boards/cover16_inputs_PCF.yaml
+  
+  # select your output board:
+  output: !include boneio/boards/relay24_outputs_MCP.yaml
+  # output: !include boneio/boards/relay32_outputs_PCF.yaml
+  # output: !include boneio/boards/relay32_outputs_MCP.yaml
+  # output: !include boneio/boards/dimmer_led8x4_outputs.yaml
+  # light: !include boneio/boards/monochromatic_lights.yaml
+  # cover: !include boneio/boards/cover.yaml
+  # output: !include boneio/boards/cover16_outputs_PCF.yaml
+  # output: !include boneio/boards/cover16_outputs_MCP.yaml
+  
+  # select your devices:
   core: !include boneio/devices/wt32_eth01.yaml
   internals: !include boneio/devices/boneio_board.yaml
   temp: !include boneio/devices/lm75b.yaml
   display: !include boneio/devices/display.yaml
   # uart: !include devices/uart.yaml
   # one_wire: !include devices/one_wire.yaml
-  # relay24
+
-  output: !include boneio/boards/relay24_outputs_MCP.yaml
-  input: !include boneio/boards/relay24_inputs_PCF.yaml
-  # relay32
-  output: !include boneio/boards/relay32_outputs_PCF.yaml
-  #output: !include boneio/boards/relay32_outputs_MCP.yaml
-  input: !include boneio/boards/relay32_inputs_PCF.yaml
-  #input: !include boneio/boards/relay32_inputs_MCP.yaml
-# dimmer led
-# output: !include boneio/boards/dimmer_led8x4_outputs.yaml
-# input: !include boneio/boards/dimmer_led8x4_inputs.yaml
-# light: !include boneio/boards/monochromatic_lights.yaml
-# cover
-#  output: !include boneio/boards/cover16_outputs_PCF.yaml
-#  output: !include boneio/boards/cover16_outputs_MCP.yaml
-# input: !include boneio/boards/cover16_inputs_PCF.yaml
-# input: !include boneio/boards/cover16_inputs_MCP.yaml
-# cover: !include boneio/boards/cover.yaml
 
 logger:
   baud_rate: 0

devices/wt32_eth01.yaml

@@ -1,9 +1,3 @@
-esphome:
-  name: ${node_name}
-  platform: ESP32
-  board: nodemcu-32s
-  name_add_mac_suffix: true
-
 i2c:
   - id: bus_a
     sda: GPIO14
@@ -16,6 +10,13 @@ i2c:
     scan: True
     frequency: 100kHz
 
+esphome:
+  name: ${node_name}
+  platform: ESP32
+  board: nodemcu-32s
+  # set to false if you already added this device to ESPHOME add-on
+  name_add_mac_suffix: ${name_add_mac_suffix}
+
 ethernet:
   id: eth
   type: LAN8720
@@ -24,3 +25,6 @@ ethernet:
   clk_mode: GPIO0_IN
   phy_addr: 1
   power_pin: GPIO16
+
+  # uncomment this line and set your actual IP address before changing name of device
+  # use_address: xxx.xxx.xxx.xxx