add boneio dimmer gen2 rgbw and 4cct

dimmer_gen2_can.yaml

@@ -0,0 +1,284 @@
+#CAN
+substitutions:
+  name: boneio-dr-gen2-8ch-dev04-3328f7
+  friendly_name: BoneIO Dimmer dev0.4 3328f7
+  serial_prefix: dim2   #Don't change it.
+  firmware_manifest: https://boneio.eu/esp/boneio-dr-gen2-8ch-dev04.json
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+  project:
+    name: boneio.dimmer-led-gen2
+    version: dev0.4
+  on_boot:
+    priority: -100
+    then:
+    - delay: 5s
+    - if:
+        condition:
+          lambda: return id(serial_no) != nullptr;
+        then:
+        - component.update: serial_no
+        - logger.log: Serial No updated on boot
+        else:
+        - logger.log: Serial No component not found
+
+external_components:
+  - source: github://mrk-its/esphome-canopen
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: esp-idf
+
+
+ethernet:
+  id: eth
+  type: W5500
+  clk_pin: GPIO13
+  mosi_pin: GPIO39
+  miso_pin: GPIO38
+  cs_pin: GPIO12
+  interrupt_pin: GPIO2
+  reset_pin: GPIO1
+  clock_speed: 25MHz
+  # use_address: 192.168.13.107
+  use_address: 192.168.50.173
+
+
+i2c:
+  sda: GPIO10
+  scl: GPIO11
+  scan: true
+  frequency: 400kHz
+
+uart:
+  id: boneio_uart
+  rx_pin: GPIO21
+  tx_pin: GPIO14
+  baud_rate: 9600
+  stop_bits: 1
+
+output:
+- platform: ledc
+  pin: GPIO18
+  frequency: 1000Hz
+  inverted: false
+  id: chl01
+- platform: ledc
+  pin: GPIO17
+  frequency: 1000Hz
+  inverted: false
+  id: chl02
+- platform: ledc
+  pin: GPIO16
+  frequency: 1000Hz
+  inverted: false
+  id: chl03
+- platform: ledc
+  pin: GPIO15
+  frequency: 1000Hz
+  inverted: false
+  id: chl04
+
+- platform: ledc
+  pin: GPIO7
+  frequency: 1000Hz
+  inverted: false
+  id: chr01
+- platform: ledc
+  pin: GPIO6
+  frequency: 1000Hz
+  inverted: false
+  id: chr02
+- platform: ledc
+  pin: GPIO5
+  frequency: 1000Hz
+  inverted: false
+  id: chr03
+- platform: ledc
+  pin: GPIO4
+  frequency: 1000Hz
+  inverted: false
+  id: chr04
+
+
+  ##CAN gpio48 - tx, gpio47 rx, gpio35 stb
+
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.7.1
+    files: [devices/serial_no.yaml]
+
+dashboard_import:
+  package_import_url: 
+    github://boneIO-eu/esphome/boneio-dimmer_g2_8ch-dev0_4.yaml@main
+  import_full_config: true
+
+pcf8574:
+- id: pcf_inputs
+  address: 0x38
+
+# http_request:
+#   timeout: 7s
+#   verify_ssl: false
+logger:
+  hardware_uart: UART0
+api:
+  reboot_timeout: 0s
+ota:
+- platform: esphome
+- platform: web_server
+
+
+web_server:
+  port: 80
+  version: 3
+  local: true
+
+
+switch:
+- platform: gpio
+  id: buzzer
+  name: Buzzer
+  pin:
+    number: GPIO9
+    mode:
+      output: true
+    inverted: false
+- platform: gpio
+  id: can_bus_switch
+  name: CAN Bus Switch
+  pin:
+    number: GPIO3
+    mode:
+      output: true
+    inverted: false
+- platform: template
+  id: master
+  name: master
+  optimistic: true
+  on_turn_on:
+    then:
+      - delay: 0ms
+      - lambda: id(can_open).send_entity_cmd(0x2, 1, (uint8_t)1);
+  on_turn_off:
+    then:
+      - delay: 0ms
+      - lambda: id(can_open).send_entity_cmd(0x2, 1, (uint8_t)0);
+
+binary_sensor:
+
+- platform: gpio
+  name: IN_01
+  id: in_01
+  pin:
+    pcf8574: pcf_inputs
+    number: 0
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_02
+  id: in_02
+  pin:
+    pcf8574: pcf_inputs
+    number: 1
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_03
+  id: in_03
+  pin:
+    pcf8574: pcf_inputs
+    number: 2
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_04
+  id: in_04
+  pin:
+    pcf8574: pcf_inputs
+    number: 3
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_05
+  id: in_05
+  pin:
+    pcf8574: pcf_inputs
+    number: 4
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_06
+  id: in_06
+  pin:
+    pcf8574: pcf_inputs
+    number: 5
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_07
+  id: in_07
+  pin:
+    pcf8574: pcf_inputs
+    number: 6
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_08
+  id: in_08
+  pin:
+    pcf8574: pcf_inputs
+    number: 7
+    mode:
+      input: true
+    inverted: true
+- platform: template
+  name: CAN Bus Button
+  id: can_bus_button
+
+canbus:
+  - platform: esp32_can
+    id: can_bus
+    tx_pin: GPIO48
+    rx_pin: GPIO47
+    can_id: 1
+    bit_rate: 50kbps
+
+
+# button:
+#    - platform: template
+#      name: 'CAN Sensor ON'
+#      on_press:
+#        - logger.log: Button Pressed
+#        - canbus.send: [0x11, 0x22, 0x33]
+#    - platform: template
+#      name: 'CAN Sensor OFF'
+#      on_press:
+#        - logger.log: Button Pressed
+#        - canbus.send: [0x12, 0x22, 0x33]
+
+canopen:
+  id: can_open
+  canbus_id: can_bus
+  entities: []
+  node_id: 1
+