add boneio dimmer gen2 rgbw and 4cct

boneio-dimmer_gen2_2rgbw-v0_1.yaml

@@ -0,0 +1,283 @@
+substitutions:
+  name: boneio-dr-gen2-8ch-01
+  friendly_name: 'BoneIO Dimmer 8ch Gen2'
+  serial_prefix: 'dim2' #Don't change it.
+  firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-8ch-01.json'
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led-gen2
+    version: '0.1'
+  on_boot:
+    priority: -100
+    then:
+      - delay: 5s
+      - if:
+          condition:
+            lambda: 'return id(serial_no) != nullptr;'
+          then:
+            - component.update: serial_no
+            - logger.log: "Serial No updated on boot"
+          else:
+            - logger.log: "Serial No component not found"
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:                                                                            
+    type: esp-idf
+
+ethernet:
+  id: eth
+  type: W5500
+  clk_pin: GPIO13
+  mosi_pin: GPIO39
+  miso_pin: GPIO38
+  cs_pin: GPIO12
+  interrupt_pin: GPIO2
+  reset_pin: GPIO1
+  clock_speed: 25MHz
+
+i2c:
+  sda: GPIO10
+  scl: GPIO11
+  scan: True
+  frequency: 400kHz
+
+
+
+output:
+  - platform: ledc
+    pin: GPIO18
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: GPIO17
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: GPIO16
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: GPIO15
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: GPIO7
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: GPIO6
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: GPIO5
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: GPIO4
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+
+# CAN gpio48 - tx, gpio47 rx, gpio35 stb
+# uart:
+#   id: boneio_uart
+#   rx_pin: GPIO21
+#   tx_pin: GPIO14
+#   baud_rate: 9600
+#   stop_bits: 1
+# modbus:
+#   send_wait_time: 80ms
+#   uart_id: boneio_uart
+#   id: boneio_modbus
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.7.1
+    files: [
+        'devices/serial_no.yaml',
+      ]
+  # boneiopackages:
+  #   url: https://github.com/boneIO-eu/esphome_packages
+  #   ref: main
+  #   refresh: 1min
+  #   files:
+  #     - path: sdm630.yaml
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_8ch-v0_1.yaml@main
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+  hardware_uart: UART0
+api:
+  reboot_timeout: 0s
+ota:
+  - platform: esphome
+  - platform: web_server
+
+web_server:
+  port: 80
+  version: 3
+  local: true
+
+
+light:
+  - platform: rgbw
+    id: rgbw_l
+    name: 'RGBW L'
+    red: chl01
+    green: chl02
+    blue: chl03
+    white: chl04
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: rgbw
+    id: rgbw_r
+    name: 'RGBW R'
+    red: chr01
+    green: chr02
+    blue: chr03
+    white: chr04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+debug:
+  update_interval: 15s
+
+sensor:
+  - platform: debug
+    free:
+      name: "Heap Free"
+    block:
+      name: "Heap Max Block"
+    loop_time:
+      name: "Loop Time"
+  - platform: lm75b
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      number: GPIO9
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    id: can_bus_switch
+    name: 'CAN Bus Switch'
+    pin:
+      number: GPIO35
+      mode:
+        output: true
+      inverted: false
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs
+      number: 6
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs
+      number: 7
+      mode:
+        input: true
+      inverted: true

boneio-dimmer_gen2_4cct-v0_1.yaml

@@ -0,0 +1,291 @@
+substitutions:
+  name: boneio-dr-gen2-8ch-01
+  friendly_name: 'BoneIO Dimmer 8ch Gen2'
+  serial_prefix: 'dim2' #Don't change it.
+  firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-8ch-01.json'
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led-gen2
+    version: '0.1'
+  on_boot:
+    priority: -100
+    then:
+      - delay: 5s
+      - if:
+          condition:
+            lambda: 'return id(serial_no) != nullptr;'
+          then:
+            - component.update: serial_no
+            - logger.log: "Serial No updated on boot"
+          else:
+            - logger.log: "Serial No component not found"
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:                                                                            
+    type: esp-idf
+
+ethernet:
+  id: eth
+  type: W5500
+  clk_pin: GPIO13
+  mosi_pin: GPIO39
+  miso_pin: GPIO38
+  cs_pin: GPIO12
+  interrupt_pin: GPIO2
+  reset_pin: GPIO1
+  clock_speed: 25MHz
+
+i2c:
+  sda: GPIO10
+  scl: GPIO11
+  scan: True
+  frequency: 400kHz
+
+
+
+output:
+  - platform: ledc
+    pin: GPIO18
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: GPIO17
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: GPIO16
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: GPIO15
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: GPIO7
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: GPIO6
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: GPIO5
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: GPIO4
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+
+# CAN gpio48 - tx, gpio47 rx, gpio35 stb
+# uart:
+#   id: boneio_uart
+#   rx_pin: GPIO21
+#   tx_pin: GPIO14
+#   baud_rate: 9600
+#   stop_bits: 1
+# modbus:
+#   send_wait_time: 80ms
+#   uart_id: boneio_uart
+#   id: boneio_modbus
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.7.1
+    files: [
+        'devices/serial_no.yaml',
+      ]
+  # boneiopackages:
+  #   url: https://github.com/boneIO-eu/esphome_packages
+  #   ref: main
+  #   refresh: 1min
+  #   files:
+  #     - path: sdm630.yaml
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_8ch-v0_1.yaml@main
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+  hardware_uart: UART0
+api:
+  reboot_timeout: 0s
+ota:
+  - platform: esphome
+  - platform: web_server
+
+web_server:
+  port: 80
+  version: 3
+  local: true
+
+
+light:
+  - platform: cwww
+    name: 'CHL_01_02'
+    cold_white: chl01
+    warm_white: chl02
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+  - platform: cwww
+    name: 'CHL_03_04'
+    cold_white: chl03
+    warm_white: chl04
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+  - platform: cwww
+    name: 'CHR_01_02'
+    cold_white: chr01
+    warm_white: chr02
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+  - platform: cwww
+    name: 'CHR_03_04'
+    cold_white: chr03
+    warm_white: chr04
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+debug:
+  update_interval: 15s
+
+sensor:
+  - platform: debug
+    free:
+      name: "Heap Free"
+    block:
+      name: "Heap Max Block"
+    loop_time:
+      name: "Loop Time"
+  - platform: lm75b
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      number: GPIO9
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    id: can_bus_switch
+    name: 'CAN Bus Switch'
+    pin:
+      number: GPIO35
+      mode:
+        output: true
+      inverted: false
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs
+      number: 6
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs
+      number: 7
+      mode:
+        input: true
+      inverted: true

boneio-dimmer_gen2_8ch-v0_1.yaml

@@ -1,6 +1,6 @@
 substitutions:
   name: boneio-dr-gen2-8ch-01
-  friendly_name: 'BoneIO Dimmer 8ch'
+  friendly_name: 'BoneIO Dimmer 8ch Gen2'
   serial_prefix: 'dim2' #Don't change it.
   firmware_manifest: 'https://boneio.eu/fwesp/boneio-dr-gen2-8ch-01.json'
 esphome:
@@ -39,22 +39,13 @@ ethernet:
   reset_pin: GPIO1
   clock_speed: 25MHz
 
-external_components:
-  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
-    components: [lm75]
-
 i2c:
   sda: GPIO10
   scl: GPIO11
   scan: True
   frequency: 400kHz
 
-uart:
+
-  id: boneio_uart
-  rx_pin: GPIO21
-  tx_pin: GPIO14
-  baud_rate: 9600
-  stop_bits: 1
 
 output:
   - platform: ledc
@@ -100,12 +91,17 @@ output:
     id: chr04
 
 
-  ##CAN gpio48 - tx, gpio47 rx, gpio35 stb
+# CAN gpio48 - tx, gpio47 rx, gpio35 stb
-
+# uart:
-modbus:
+#   id: boneio_uart
-  send_wait_time: 80ms
+#   rx_pin: GPIO21
-  uart_id: boneio_uart
+#   tx_pin: GPIO14
-  id: boneio_modbus
+#   baud_rate: 9600
+#   stop_bits: 1
+# modbus:
+#   send_wait_time: 80ms
+#   uart_id: boneio_uart
+#   id: boneio_modbus
 
 packages:
   internals_packages:
@@ -113,14 +109,13 @@ packages:
     ref: v1.7.1
     files: [
         'devices/serial_no.yaml',
-        # 'devices/dimmer_i2c.yaml',
       ]
-  boneiopackages:
+  # boneiopackages:
-    url: https://github.com/boneIO-eu/esphome_packages
+  #   url: https://github.com/boneIO-eu/esphome_packages
-    ref: main
+  #   ref: main
-    refresh: 1min
+  #   refresh: 1min
-    files:
+  #   files:
-      - path: sdm630.yaml
+  #     - path: sdm630.yaml
 
 dashboard_import:
   package_import_url: github://boneIO-eu/esphome/boneio-dimmer_gen2_8ch-v0_1.yaml@main
@@ -130,9 +125,6 @@ pcf8574:
   - id: 'pcf_inputs'
     address: 0x38
 
-# http_request:
-#   timeout: 7s
-#   verify_ssl: false
 logger:
   hardware_uart: UART0
 api:
@@ -140,14 +132,6 @@ api:
 ota:
   - platform: esphome
   - platform: web_server
-  # - platform: http_request
-
-# update:
-#   - id: update_std
-#     platform: http_request
-#     name: boneIO FW Update
-#     update_interval: 3 minutes
-#     source: ${firmware_manifest}
 
 web_server:
   port: 80
@@ -217,7 +201,7 @@ sensor:
       name: "Heap Max Block"
     loop_time:
       name: "Loop Time"
-  - platform: lm75
+  - platform: lm75b
     id: boneIO_temp
     name: 'Temperature'
     update_interval: 30s
@@ -247,15 +231,8 @@ switch:
       mode:
         output: true
       inverted: false
-  - platform: gpio
-    name: "CAN RX"
-    pin: GPIO47
-  - platform: gpio
-    name: "CAN TX"
-    pin: GPIO48
 
 binary_sensor:
-
   - platform: gpio
     name: 'IN_01'
     id: in_01
@@ -334,41 +311,4 @@ binary_sensor:
       number: 7
       mode:
         input: true
-      inverted: true
+      inverted: true
-  - platform: template
-    name: CAN Bus Button
-    id: can_bus_button
-
-
-# canbus:
-#   - platform: esp32_can
-#     tx_pin: GPIO48
-#     rx_pin: GPIO47
-#     can_id: 4
-#     bit_rate: 50kbps
-#     on_frame:
-#       - can_id: 5
-#         then:
-#           - lambda: |-
-#               if(x.size() > 0) {
-#                 switch(x[0]) {
-#                   case 0x12:  // button release
-#                     id(can_bus_button).publish_state(false);
-#                     break;
-#                   case 0x11:  // button press
-#                     id(can_bus_button).publish_state(true);
-#                     break;
-#                 }
-#               }
-
-# button:
-#   - platform: template
-#     name: 'CAN Sensor ON'
-#     on_press:
-#       - logger.log: Button Pressed
-#       - canbus.send: [0x11, 0x22, 0x33]
-#   - platform: template
-#     name: 'CAN Sensor OFF'
-#     on_press:
-#       - logger.log: Button Pressed
-#       - canbus.send: [0x12, 0x22, 0x33]

create_firmware.py

@@ -18,6 +18,20 @@ json_destination = "../website2/public/fwesp"
 firmware_destination = "../website2/public/fwesp/firmware"
 firmware_destination2 = "../esphome_uploader/firmware"
 
+# Lista plików do wykluczenia z przetwarzania
+exclude_files = [
+    "boneio-8x10A_v0_1.yaml",
+    "dimmer_gen2_can.yaml",
+    "dimmer_gen2_emc.yaml",
+    "dev-boneio-32x10_lights_v0_9.yaml"
+    "boneio-mosfet48_lights_v0_7.yaml",
+    "boneio-mosfet48_switches_v0_7.yaml"
+    "boneio-8x10A_v0_1.yaml"
+    "boneio-dimmer_gen2_8ch-dev0_4.yaml"
+
+    # Dodaj tutaj kolejne pliki do wykluczenia
+]
+
 
 def json_pattern(firmware_name, chip_family="ESP32"):
     return {
@@ -52,7 +66,11 @@ def get_boneio_name(file):
 
 
 for file in glob.glob("*.yaml"):
-# for file in glob.glob("boneio-dimmer_gen2_8ch-v0_1.yaml"):
+    # Pomiń pliki z listy wykluczeń
+    if file in exclude_files:
+        print(f"Skipping excluded file: {file}")
+        continue
+    
     filename = get_boneio_name(file)
     chip_family = "ESP32-S3" if "gen2" in filename else "ESP32"
     if not filename:

dimmer_gen2_can.yaml

@@ -0,0 +1,284 @@
+#CAN
+substitutions:
+  name: boneio-dr-gen2-8ch-dev04-3328f7
+  friendly_name: BoneIO Dimmer dev0.4 3328f7
+  serial_prefix: dim2   #Don't change it.
+  firmware_manifest: https://boneio.eu/esp/boneio-dr-gen2-8ch-dev04.json
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+  project:
+    name: boneio.dimmer-led-gen2
+    version: dev0.4
+  on_boot:
+    priority: -100
+    then:
+    - delay: 5s
+    - if:
+        condition:
+          lambda: return id(serial_no) != nullptr;
+        then:
+        - component.update: serial_no
+        - logger.log: Serial No updated on boot
+        else:
+        - logger.log: Serial No component not found
+
+external_components:
+  - source: github://mrk-its/esphome-canopen
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: esp-idf
+
+
+ethernet:
+  id: eth
+  type: W5500
+  clk_pin: GPIO13
+  mosi_pin: GPIO39
+  miso_pin: GPIO38
+  cs_pin: GPIO12
+  interrupt_pin: GPIO2
+  reset_pin: GPIO1
+  clock_speed: 25MHz
+  # use_address: 192.168.13.107
+  use_address: 192.168.50.173
+
+
+i2c:
+  sda: GPIO10
+  scl: GPIO11
+  scan: true
+  frequency: 400kHz
+
+uart:
+  id: boneio_uart
+  rx_pin: GPIO21
+  tx_pin: GPIO14
+  baud_rate: 9600
+  stop_bits: 1
+
+output:
+- platform: ledc
+  pin: GPIO18
+  frequency: 1000Hz
+  inverted: false
+  id: chl01
+- platform: ledc
+  pin: GPIO17
+  frequency: 1000Hz
+  inverted: false
+  id: chl02
+- platform: ledc
+  pin: GPIO16
+  frequency: 1000Hz
+  inverted: false
+  id: chl03
+- platform: ledc
+  pin: GPIO15
+  frequency: 1000Hz
+  inverted: false
+  id: chl04
+
+- platform: ledc
+  pin: GPIO7
+  frequency: 1000Hz
+  inverted: false
+  id: chr01
+- platform: ledc
+  pin: GPIO6
+  frequency: 1000Hz
+  inverted: false
+  id: chr02
+- platform: ledc
+  pin: GPIO5
+  frequency: 1000Hz
+  inverted: false
+  id: chr03
+- platform: ledc
+  pin: GPIO4
+  frequency: 1000Hz
+  inverted: false
+  id: chr04
+
+
+  ##CAN gpio48 - tx, gpio47 rx, gpio35 stb
+
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.7.1
+    files: [devices/serial_no.yaml]
+
+dashboard_import:
+  package_import_url: 
+    github://boneIO-eu/esphome/boneio-dimmer_g2_8ch-dev0_4.yaml@main
+  import_full_config: true
+
+pcf8574:
+- id: pcf_inputs
+  address: 0x38
+
+# http_request:
+#   timeout: 7s
+#   verify_ssl: false
+logger:
+  hardware_uart: UART0
+api:
+  reboot_timeout: 0s
+ota:
+- platform: esphome
+- platform: web_server
+
+
+web_server:
+  port: 80
+  version: 3
+  local: true
+
+
+switch:
+- platform: gpio
+  id: buzzer
+  name: Buzzer
+  pin:
+    number: GPIO9
+    mode:
+      output: true
+    inverted: false
+- platform: gpio
+  id: can_bus_switch
+  name: CAN Bus Switch
+  pin:
+    number: GPIO3
+    mode:
+      output: true
+    inverted: false
+- platform: template
+  id: master
+  name: master
+  optimistic: true
+  on_turn_on:
+    then:
+      - delay: 0ms
+      - lambda: id(can_open).send_entity_cmd(0x2, 1, (uint8_t)1);
+  on_turn_off:
+    then:
+      - delay: 0ms
+      - lambda: id(can_open).send_entity_cmd(0x2, 1, (uint8_t)0);
+
+binary_sensor:
+
+- platform: gpio
+  name: IN_01
+  id: in_01
+  pin:
+    pcf8574: pcf_inputs
+    number: 0
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_02
+  id: in_02
+  pin:
+    pcf8574: pcf_inputs
+    number: 1
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_03
+  id: in_03
+  pin:
+    pcf8574: pcf_inputs
+    number: 2
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_04
+  id: in_04
+  pin:
+    pcf8574: pcf_inputs
+    number: 3
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_05
+  id: in_05
+  pin:
+    pcf8574: pcf_inputs
+    number: 4
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_06
+  id: in_06
+  pin:
+    pcf8574: pcf_inputs
+    number: 5
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_07
+  id: in_07
+  pin:
+    pcf8574: pcf_inputs
+    number: 6
+    mode:
+      input: true
+    inverted: true
+
+- platform: gpio
+  name: IN_08
+  id: in_08
+  pin:
+    pcf8574: pcf_inputs
+    number: 7
+    mode:
+      input: true
+    inverted: true
+- platform: template
+  name: CAN Bus Button
+  id: can_bus_button
+
+canbus:
+  - platform: esp32_can
+    id: can_bus
+    tx_pin: GPIO48
+    rx_pin: GPIO47
+    can_id: 1
+    bit_rate: 50kbps
+
+
+# button:
+#    - platform: template
+#      name: 'CAN Sensor ON'
+#      on_press:
+#        - logger.log: Button Pressed
+#        - canbus.send: [0x11, 0x22, 0x33]
+#    - platform: template
+#      name: 'CAN Sensor OFF'
+#      on_press:
+#        - logger.log: Button Pressed
+#        - canbus.send: [0x12, 0x22, 0x33]
+
+canopen:
+  id: can_open
+  canbus_id: can_bus
+  entities: []
+  node_id: 1
+