Merge pull request #10 from boneIO-eu/input_board_v_0_5

Input board v 0 5

.gitignore

@@ -127,3 +127,5 @@ dmypy.json
 
 # Pyre type checker
 .pyre/
+
+.esphome/

README.md

@@ -1,2 +1,7 @@
 # esphome
+
 BoneIO ESP Esphome configuration and custom components repo
+
+Dev branch is for the newest not released version of the board!
+
+Look for branch with yout input board version to download current software.

boards/cover.yaml

@@ -14,13 +14,6 @@ cover:
   stop_action:
     - switch.turn_off: cover_open_01
     - switch.turn_off: cover_close_01
-  tilt_action:
-    - cover.close: this cover
-    - delay: 2s
-    - switch.turn_on: open_cover_switch
-    - lambda: |- wyliczenie czasu z zadanej pozycji
-    - delay: X
-    - switch.turn_off: open_cover_switch
 
 - platform: time_based
   name: "${node_name} Cover 02"
@@ -101,3 +94,163 @@ cover:
   stop_action:
     - switch.turn_off: cover_open_06
     - switch.turn_off: cover_close_06
+
+- platform: time_based
+  name: "${node_name} Cover 07"
+  device_class: shutter
+  id: cover_07
+  open_action:
+    - switch.turn_off: cover_close_07
+    - switch.turn_on: cover_open_07
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_07
+    - switch.turn_on: cover_close_07
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_07
+    - switch.turn_off: cover_close_07
+
+- platform: time_based
+  name: "${node_name} Cover 08"
+  device_class: shutter
+  id: cover_08
+  open_action:
+    - switch.turn_off: cover_close_08
+    - switch.turn_on: cover_open_08
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_08
+    - switch.turn_on: cover_close_08
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_08
+    - switch.turn_off: cover_close_08
+
+- platform: time_based
+  name: "${node_name} Cover 09"
+  device_class: shutter
+  id: cover_09
+  open_action:
+    - switch.turn_off: cover_close_09
+    - switch.turn_on: cover_open_09
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_09
+    - switch.turn_on: cover_close_09
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_09
+    - switch.turn_off: cover_close_09
+
+- platform: time_based
+  name: "${node_name} Cover 10"
+  device_class: shutter
+  id: cover_10
+  open_action:
+    - switch.turn_off: cover_close_10
+    - switch.turn_on: cover_open_10
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_10
+    - switch.turn_on: cover_close_10
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_10
+    - switch.turn_off: cover_close_10
+
+- platform: time_based
+  name: "${node_name} Cover 11"
+  device_class: shutter
+  id: cover_11
+  open_action:
+    - switch.turn_off: cover_close_11
+    - switch.turn_on: cover_open_11
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_11
+    - switch.turn_on: cover_close_11
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_11
+    - switch.turn_off: cover_close_11
+
+- platform: time_based
+  name: "${node_name} Cover 12"
+  device_class: shutter
+  id: cover_12
+  open_action:
+    - switch.turn_off: cover_close_12
+    - switch.turn_on: cover_open_12
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_12
+    - switch.turn_on: cover_close_12
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_12
+    - switch.turn_off: cover_close_12
+
+- platform: time_based
+  name: "${node_name} Cover 13"
+  device_class: shutter
+  id: cover_13
+  open_action:
+    - switch.turn_off: cover_close_13
+    - switch.turn_on: cover_open_13
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_13
+    - switch.turn_on: cover_close_13
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_13
+    - switch.turn_off: cover_close_13
+
+- platform: time_based
+  name: "${node_name} Cover 14"
+  device_class: shutter
+  id: cover_14
+  open_action:
+    - switch.turn_off: cover_close_14
+    - switch.turn_on: cover_open_14
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_14
+    - switch.turn_on: cover_close_14
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_14
+    - switch.turn_off: cover_close_14
+
+- platform: time_based
+  name: "${node_name} Cover 15"
+  device_class: shutter
+  id: cover_15
+  open_action:
+    - switch.turn_off: cover_close_15
+    - switch.turn_on: cover_open_15
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_15
+    - switch.turn_on: cover_close_15
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_15
+    - switch.turn_off: cover_close_15
+
+- platform: time_based
+  name: "${node_name} Cover 16"
+  device_class: shutter
+  id: cover_16
+  open_action:
+    - switch.turn_off: cover_close_16
+    - switch.turn_on: cover_open_16
+  open_duration: 60s
+  close_action:
+    - switch.turn_off: cover_open_16
+    - switch.turn_on: cover_close_16
+  close_duration: 60s
+  stop_action:
+    - switch.turn_off: cover_open_16
+    - switch.turn_off: cover_close_16

boards/cover16_inputs_MCP.yaml

@@ -0,0 +1,900 @@
+
+binary_sensor:
+  - platform: gpio
+    name: "${node_name} IN_01"
+    id: in_01
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 0
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_01
+    on_release:
+      then:
+        - cover.stop: cover_01
+
+  - platform: gpio
+    name: "${node_name} IN_02"
+    id: in_02
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 1
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      - cover.close: cover_01
+    on_release:
+      - cover.stop: cover_01
+
+  - platform: gpio
+    name: "${node_name} IN_03"
+    id: in_03
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 2
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.open: cover_02
+    on_release:
+      then:
+        cover.stop: cover_02
+
+  - platform: gpio
+    name: "${node_name} IN_04"
+    id: in_04
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 3
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.close: cover_02
+    on_release:
+      then:
+        cover.stop: cover_02
+
+  # - platform: gpio
+  #   name: "${node_name} IN_05"
+  #   id: in_05
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 4
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.open: cover_03
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_03
+
+  # - platform: gpio
+  #   name: "${node_name} IN_06"
+  #   id: in_06
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 5
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.close: cover_03
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_03
+
+  # - platform: gpio
+  #   name: "${node_name} IN_07"
+  #   id: in_07
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 6
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.open: cover_04
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_04
+
+  # - platform: gpio
+  #   name: "${node_name} IN_08"
+  #   id: in_08
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 7
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.close: cover_04
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_04
+
+  # - platform: gpio
+  #   name: "${node_name} IN_09"
+  #   id: in_09
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 8
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.open: cover_05
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_05
+
+  # - platform: gpio
+  #   name: "${node_name} IN_10"
+  #   id: in_10
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 9
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.close: cover_05
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_05
+
+  # - platform: gpio
+  #   name: "${node_name} IN_11"
+  #   id: in_11
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 10
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.open: cover_06
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_06
+
+  # - platform: gpio
+  #   name: "${node_name} IN_12"
+  #   id: in_12
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 11
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       cover.close: cover_06
+  #   on_release:
+  #     then:
+  #       cover.stop: cover_06
+
+  # - platform: gpio
+  #   name: "${node_name} IN_13"
+  #   id: in_13
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 12
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_13
+
+  # - platform: gpio
+  #   name: "${node_name} IN_14"
+  #   id: in_14
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 13
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_14
+
+  # - platform: gpio
+  #   name: "${node_name} IN_15"
+  #   id: in_15
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 14
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_15
+
+  # - platform: gpio
+  #   name: "${node_name} IN_16"
+  #   id: in_16
+  #   pin:
+  #     mcp23xxx: mcp_inputs_1to16
+  #     number: 15
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_16
+
+  # - platform: gpio
+  #   name: "${node_name} IN_17"
+  #   id: in_17
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 7
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_17
+
+  # - platform: gpio
+  #   name: "${node_name} IN_18"
+  #   id: in_18
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 6
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_18
+
+  # - platform: gpio
+  #   name: "${node_name} IN_19"
+  #   id: in_19
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 5
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_19
+
+  # - platform: gpio
+  #   name: "${node_name} IN_20"
+  #   id: in_20
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 4
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_20
+
+  # - platform: gpio
+  #   name: "${node_name} IN_21"
+  #   id: in_21
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 3
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_21
+
+  # - platform: gpio
+  #   name: "${node_name} IN_22"
+  #   id: in_22
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 2
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_22
+
+  # - platform: gpio
+  #   name: "${node_name} IN_23"
+  #   id: in_23
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 1
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_22
+
+  # - platform: gpio
+  #   name: "${node_name} IN_24"
+  #   id: in_24
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 0
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_24
+
+  # - platform: gpio
+  #   name: "${node_name} IN_25"
+  #   id: in_25
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 8
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_25
+
+  # - platform: gpio
+  #   name: "${node_name} IN_26"
+  #   id: in_26
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 9
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_26
+
+  # - platform: gpio
+  #   name: "${node_name} IN_27"
+  #   id: in_27
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 10
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_27
+
+  # - platform: gpio
+  #   name: "${node_name} IN_28"
+  #   id: in_28
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 11
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_28
+
+  # - platform: gpio
+  #   name: "${node_name} IN_29"
+  #   id: in_29
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 12
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_29
+
+  # - platform: gpio
+  #   name: "${node_name} IN_30"
+  #   id: in_30
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 13
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_30
+
+  # - platform: gpio
+  #   name: "${node_name} IN_31"
+  #   id: in_31
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 14
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_31
+
+  # - platform: gpio
+  #   name: "${node_name} IN_32"
+  #   id: in_32
+  #   pin:
+  #     mcp23xxx: mcp_inputs_17to32
+  #     number: 15
+  #     mode:
+  #       input: true
+  #       pullup: false
+  #     inverted: true
+  #   on_press:
+  #     then:
+  #       - switch.toggle: relay_32
+
+  - platform: gpio
+    name: "${node_name} IN_05"
+    id: in_05
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 4
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.open: cover_03
+    on_release:
+      then:
+        cover.stop: cover_03
+
+  - platform: gpio
+    name: "${node_name} IN_06"
+    id: in_06
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 5
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.close: cover_03
+    on_release:
+      then:
+        cover.stop: cover_03
+
+  - platform: gpio
+    name: "${node_name} IN_07"
+    id: in_07
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 6
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.open: cover_04
+    on_release:
+      then:
+        cover.stop: cover_04
+
+  - platform: gpio
+    name: "${node_name} IN_08"
+    id: in_08
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 7
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.close: cover_04
+    on_release:
+      then:
+        cover.stop: cover_04
+
+  - platform: gpio
+    name: "${node_name} IN_09"
+    id: in_09
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 8
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.open: cover_05
+    on_release:
+      then:
+        cover.stop: cover_05
+
+  - platform: gpio
+    name: "${node_name} IN_10"
+    id: in_10
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 9
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.close: cover_05
+    on_release:
+      then:
+        cover.stop: cover_05
+
+  - platform: gpio
+    name: "${node_name} IN_11"
+    id: in_11
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 10
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.open: cover_06
+    on_release:
+      then:
+        cover.stop: cover_06
+
+  - platform: gpio
+    name: "${node_name} IN_12"
+    id: in_12
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 11
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        cover.close: cover_06
+    on_release:
+      then:
+        cover.stop: cover_06
+
+  - platform: gpio
+    name: "${node_name} IN_13"
+    id: in_13
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 12
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_13
+
+  - platform: gpio
+    name: "${node_name} IN_14"
+    id: in_14
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 13
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_14
+
+  - platform: gpio
+    name: "${node_name} IN_15"
+    id: in_15
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 14
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_15
+
+  - platform: gpio
+    name: "${node_name} IN_16"
+    id: in_16
+    pin:
+      mcp23xxx: mcp_inputs_1to16
+      number: 15
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_16
+
+  - platform: gpio
+    name: "${node_name} IN_17"
+    id: in_17
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 7
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_17
+
+  - platform: gpio
+    name: "${node_name} IN_18"
+    id: in_18
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 6
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_18
+
+  - platform: gpio
+    name: "${node_name} IN_19"
+    id: in_19
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 5
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_19
+
+  - platform: gpio
+    name: "${node_name} IN_20"
+    id: in_20
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 4
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_20
+
+  - platform: gpio
+    name: "${node_name} IN_21"
+    id: in_21
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 3
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_21
+
+  - platform: gpio
+    name: "${node_name} IN_22"
+    id: in_22
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 2
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_22
+
+  - platform: gpio
+    name: "${node_name} IN_23"
+    id: in_23
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 1
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_22
+
+  - platform: gpio
+    name: "${node_name} IN_24"
+    id: in_24
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 0
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_24
+
+  - platform: gpio
+    name: "${node_name} IN_25"
+    id: in_25
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 8
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_25
+
+  - platform: gpio
+    name: "${node_name} IN_26"
+    id: in_26
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 9
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_26
+
+  - platform: gpio
+    name: "${node_name} IN_27"
+    id: in_27
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 10
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_27
+
+  - platform: gpio
+    name: "${node_name} IN_28"
+    id: in_28
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 11
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_28
+
+  - platform: gpio
+    name: "${node_name} IN_29"
+    id: in_29
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 12
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_29
+
+  - platform: gpio
+    name: "${node_name} IN_30"
+    id: in_30
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 13
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_30
+
+  - platform: gpio
+    name: "${node_name} IN_31"
+    id: in_31
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 14
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_31
+
+  - platform: gpio
+    name: "${node_name} IN_32"
+    id: in_32
+    pin:
+      mcp23xxx: mcp_inputs_17to32
+      number: 15
+      mode:
+        input: true
+        pullup: false
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_32
+

boards/cover16_outputs_MCP_old.yaml

@@ -0,0 +1,310 @@
+
+mcp23017:
+  - id: 'mcp_outputs_1to16'
+    i2c_id: bus_b
+    address: 0x21
+  - id: 'mcp_outputs_17to32'
+    i2c_id: bus_b
+    address: 0x20
+
+switch:
+  - platform: gpio
+    id: cover_open_01
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 0
+      mode: OUTPUT
+    interlock: &cover_interlock_01 [cover_open_01, cover_close_01]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_01
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 1
+      mode: OUTPUT
+    interlock: *cover_interlock_01
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_02
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 2
+      mode: OUTPUT
+    interlock: &cover_interlock_02 [cover_open_02, cover_close_02]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_02
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 3
+      mode: OUTPUT
+    interlock: *cover_interlock_02
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_03
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 4
+      mode: OUTPUT
+    interlock: &cover_interlock_03 [cover_open_03, cover_close_03]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_03
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 5
+      mode: OUTPUT
+    interlock: *cover_interlock_03
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_04
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 6
+      mode: OUTPUT
+    interlock: &cover_interlock_04 [cover_open_04, cover_close_04]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_04
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 7
+      mode: OUTPUT
+    interlock: *cover_interlock_04
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_05
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 8
+      mode: OUTPUT
+    interlock: &cover_interlock_05 [cover_open_05, cover_close_05]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_05
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 9
+      mode: OUTPUT
+    interlock: *cover_interlock_05
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_06
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 10
+      mode: OUTPUT
+    interlock: &cover_interlock_06 [cover_open_06, cover_close_06]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_06
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 11
+      mode: OUTPUT
+    interlock: *cover_interlock_06
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_07
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 12
+      mode: OUTPUT
+    interlock: &cover_interlock_07 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_07
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 13
+      mode: OUTPUT
+    interlock: *cover_interlock_07
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_08
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 14
+      mode: OUTPUT
+    interlock: &cover_interlock_08 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_08
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 15
+      mode: OUTPUT
+    interlock: *cover_interlock_08
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_09
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 0
+      mode: OUTPUT
+    interlock: &cover_interlock_09 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_09
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 1
+      mode: OUTPUT
+    interlock: *cover_interlock_09
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_10
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 2
+      mode: OUTPUT
+    interlock: &cover_interlock_10 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_10
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 3
+      mode: OUTPUT
+    interlock: *cover_interlock_10
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_11
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 4
+      mode: OUTPUT
+    interlock: &cover_interlock_11 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_11
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 5
+      mode: OUTPUT
+    interlock: *cover_interlock_11
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_12
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 6
+      mode: OUTPUT
+    interlock: &cover_interlock_12 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_12
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 7
+      mode: OUTPUT
+    interlock: *cover_interlock_12
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_13
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 8
+      mode: OUTPUT
+    interlock: &cover_interlock_13 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_13
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 9
+      mode: OUTPUT
+    interlock: *cover_interlock_13
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_14
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 10
+      mode: OUTPUT
+    interlock: &cover_interlock_14 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_14
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 11
+      mode: OUTPUT
+    interlock: *cover_interlock_14
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_15
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 12
+      mode: OUTPUT
+    interlock: &cover_interlock_15 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_15
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 13
+      mode: OUTPUT
+    interlock: *cover_interlock_15
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_16
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 14
+      mode: OUTPUT
+    interlock: &cover_interlock_16 [cover_open_07, cover_close_07]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_16
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 15
+      mode: OUTPUT
+    interlock: *cover_interlock_16
+    restore_mode: always off
+
+# example
+# relay
+#  - platform: gpio
+#    id: relay_13
+#    pin:
+#      mcp23xxx: mcp_outputs_17to32
+#      number: 4
+#      mode:
+#        output: true
+#      inverted: false
+
+

boards/cover16_outputs_PCF.yaml

@@ -0,0 +1,60 @@
+
+pcf8574:
+  - id: 'pcf_1'
+    address: 0x21
+    pcf8575: true
+    i2c_id: bus_b
+  - id: 'pcf_2'
+    address: 0x20
+    pcf8575: true
+    i2c_id: bus_b 
+
+switch:
+  - platform: gpio
+    id: cover_open_01
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 0
+      number: 15
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_01 [cover_open_01, cover_close_01]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_01
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 1
+      number: 14
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_01
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_02
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 3
+      number: 13
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_02 [cover_open_02, cover_close_02]
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_02
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 2
+      number: 12
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_02
+    restore_mode: always off

boards/coverMix_inputs_PCF.yaml

@@ -0,0 +1,491 @@
+binary_sensor:
+  - platform: gpio
+    name: '${node_name} IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_01
+    on_release:
+      then:
+        - cover.stop: cover_01
+
+  - platform: gpio
+    name: '${node_name} IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_01
+    on_release:
+      then:
+        - cover.stop: cover_01
+
+  - platform: gpio
+    name: '${node_name} IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_02
+    on_release:
+      then:
+        - cover.stop: cover_02
+
+  - platform: gpio
+    name: '${node_name} IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_02
+    on_release:
+      then:
+        - cover.stop: cover_02
+
+  - platform: gpio
+    name: '${node_name} IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_03
+    on_release:
+      then:
+        - cover.stop: cover_03
+
+  - platform: gpio
+    name: '${node_name} IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_03
+    on_release:
+      then:
+        - cover.stop: cover_03
+
+  - platform: gpio
+    name: '${node_name} IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_04
+    on_release:
+      then:
+        - cover.stop: cover_04
+
+  - platform: gpio
+    name: '${node_name} IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_04
+    on_release:
+      then:
+        - cover.stop: cover_04
+
+  - platform: gpio
+    name: '${node_name} IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_05
+    on_release:
+      then:
+        - cover.stop: cover_05
+
+  - platform: gpio
+    name: '${node_name} IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_05
+    on_release:
+      then:
+        - cover.stop: cover_05
+
+  - platform: gpio
+    name: '${node_name} IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_06
+    on_release:
+      then:
+        - cover.stop: cover_06
+
+  - platform: gpio
+    name: '${node_name} IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_06
+    on_release:
+      then:
+        - cover.stop: cover_06
+
+  - platform: gpio
+    name: '${node_name} IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_07
+    on_release:
+      then:
+        - cover.stop: cover_07
+
+  - platform: gpio
+    name: '${node_name} IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_07
+    on_release:
+      then:
+        - cover.stop: cover_07
+
+  - platform: gpio
+    name: '${node_name} IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.open: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
+
+  - platform: gpio
+    name: '${node_name} IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - cover.close: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
+
+  - platform: gpio
+    name: '${node_name} IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_17
+
+  - platform: gpio
+    name: '${node_name} IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_18
+
+  - platform: gpio
+    name: '${node_name} IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_19
+
+  - platform: gpio
+    name: '${node_name} IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_20
+
+  - platform: gpio
+    name: '${node_name} IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_21
+
+  - platform: gpio
+    name: '${node_name} IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_22
+
+  - platform: gpio
+    name: '${node_name} IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_23
+
+  - platform: gpio
+    name: '${node_name} IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_24
+
+  - platform: gpio
+    name: '${node_name} IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_25
+
+  - platform: gpio
+    name: '${node_name} IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_26
+
+  - platform: gpio
+    name: '${node_name} IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_27
+
+  - platform: gpio
+    name: '${node_name} IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_28
+
+  - platform: gpio
+    name: '${node_name} IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_29
+
+  - platform: gpio
+    name: '${node_name} IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_30
+
+  - platform: gpio
+    name: '${node_name} IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_31
+
+  - platform: gpio
+    name: '${node_name} IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: relay_32
+
+  - platform: gpio
+    name: '${node_name} IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: '${node_name} IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: '${node_name} IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true

boards/cover_mix.yaml

@@ -0,0 +1,121 @@
+cover:
+  - platform: time_based
+    name: 'Cover 01'
+    device_class: shutter
+    id: cover_01
+    open_action:
+      - switch.turn_off: cover_close_01
+      - switch.turn_on: cover_open_01
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_01
+      - switch.turn_on: cover_close_01
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_01
+      - switch.turn_off: cover_close_01
+
+  - platform: time_based
+    name: 'Cover 02'
+    id: cover_02
+    open_action:
+      - switch.turn_off: cover_close_02
+      - switch.turn_on: cover_open_02
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_02
+      - switch.turn_on: cover_close_02
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_02
+      - switch.turn_off: cover_close_02
+
+  - platform: time_based
+    name: 'Cover 03'
+    id: cover_03
+    open_action:
+      - switch.turn_off: cover_close_03
+      - switch.turn_on: cover_open_03
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_03
+      - switch.turn_on: cover_close_03
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_03
+      - switch.turn_off: cover_close_03
+
+  - platform: time_based
+    name: 'Cover 04'
+    id: cover_04
+    open_action:
+      - switch.turn_off: cover_close_04
+      - switch.turn_on: cover_open_04
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_04
+      - switch.turn_on: cover_close_04
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_04
+      - switch.turn_off: cover_close_04
+
+  - platform: time_based
+    name: 'Cover 05'
+    id: cover_05
+    open_action:
+      - switch.turn_off: cover_close_05
+      - switch.turn_on: cover_open_05
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_05
+      - switch.turn_on: cover_close_05
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_05
+      - switch.turn_off: cover_close_05
+
+  - platform: time_based
+    name: 'Cover 06'
+    id: cover_06
+    open_action:
+      - switch.turn_off: cover_close_06
+      - switch.turn_on: cover_open_06
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_06
+      - switch.turn_on: cover_close_06
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_06
+      - switch.turn_off: cover_close_06
+
+  - platform: time_based
+    name: 'Cover 07'
+    id: cover_07
+    open_action:
+      - switch.turn_off: cover_close_07
+      - switch.turn_on: cover_open_07
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_07
+      - switch.turn_on: cover_close_07
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_07
+      - switch.turn_off: cover_close_07
+
+  - platform: time_based
+    name: 'Cover 08'
+    id: cover_08
+    open_action:
+      - switch.turn_off: cover_close_08
+      - switch.turn_on: cover_open_08
+    open_duration: 10s
+    close_action:
+      - switch.turn_off: cover_open_08
+      - switch.turn_on: cover_close_08
+    close_duration: 10s
+    stop_action:
+      - switch.turn_off: cover_open_08
+      - switch.turn_off: cover_close_08

boards/dimmer_led8x4_outputs.yaml

@@ -5,9 +5,11 @@ pca9685:
   - address: 0x41
     id: pca_hub_1to16
     frequency: 500
+    i2c_id: bus_b
   - address: 0x42
     id: pca_hub_17to32
     frequency: 500
+    i2c_id: bus_b
 
 output:
   - platform: pca9685

boards/mosfet48_outputs_PCF.yaml

@@ -0,0 +1,543 @@
+
+pcf8574:
+  - id: 'pcf_1'
+    address: 0x20
+    pcf8575: true
+    i2c_id: bus_b
+  - id: 'pcf_2'
+    address: 0x21
+    pcf8575: true
+    i2c_id: bus_b 
+  - id: 'pcf_3'
+    address: 0x22
+    pcf8575: true
+    i2c_id: bus_b 
+
+switch:
+    
+  - platform: gpio
+    id: relay_1
+    name: "Relay_01"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 0
+      number: 7
+      mode:
+        output: true
+      inverted: true
+  - platform: gpio
+    id: relay_2
+    name: "Relay_02"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 1
+      number: 6
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_3
+    name: "Relay_03"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 2
+      number: 5
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_4
+    name: "Relay_04"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 3
+      number: 4
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_5
+    name: "Relay_05"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 4
+      number: 3
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_6
+    name: "Relay_06"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 5
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_7
+    name: "Relay_07"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 6
+      number: 1
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_8
+    name: "Relay_08"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 7
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_9
+    name: "Relay_09"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 0
+      number: 7
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_10
+    name: "Relay_10"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 1
+      number: 6
+      mode:
+        output: true
+      inverted: true
+  
+  - platform: gpio
+    id: relay_11
+    name: "Relay_11"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 2
+      number: 5
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_12
+    name: "Relay_12"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 3
+      number: 4
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_13
+    name: "Relay_13"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 4
+      number: 3
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_14
+    name: "Relay_14"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 5
+      number: 2
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_15
+    name: "Relay_15"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 6
+      number: 1
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_16
+    name: "Relay_16"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 7
+      number: 0
+      mode:
+        output: true
+      inverted: true
+    
+  - platform: gpio
+    id: relay_17
+    name: "Relay_17"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 15
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_18
+    name: "Relay_18"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 14
+      number: 6
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_19
+    name: "Relay_19"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 13
+      number: 5
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_20
+    name: "Relay_20"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 12
+      number: 4
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_21
+    name: "Relay_21"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 11
+      number: 3
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_22
+    name: "Relay_22"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 10
+      number: 2
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_23
+    name: "Relay_23"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 9
+      number: 1
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_24
+    name: "Relay_24"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 8
+      number: 0
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_25
+    name: "Relay_25"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 15
+      number: 8
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_26
+    name: "Relay_26"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 14
+      number: 9
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_27
+    name: "Relay_27"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 13
+      number: 10
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_28
+    name: "Relay_28"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 12
+      number: 11
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_29
+    name: "Relay_29"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 11
+      number: 12
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_30
+    name: "Relay_30"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 10
+      number: 13
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_31
+    name: "Relay_31"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 9
+      number: 14
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_32
+    name: "Relay_32"
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 8
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_33
+    name: "Relay_33"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 8
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_34
+    name: "Relay_34"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 9
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_35
+    name: "Relay_35"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_36
+    name: "Relay_36"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_37
+    name: "Relay_37"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_38
+    name: "Relay_38"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_39
+    name: "Relay_39"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 9
+      number: 14
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_40
+    name: "Relay_40"
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 15
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_41
+    name: "Relay_41"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 15
+      number: 8
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_42
+    name: "Relay_42"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 14
+      number: 9
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_43
+    name: "Relay_43"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 13
+      number: 10
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_44
+    name: "Relay_44"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 12
+      number: 11
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_45
+    name: "Relay_45"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 11
+      number: 12
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_46
+    name: "Relay_46"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 10
+      number: 13
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_47
+    name: "Relay_47"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 9
+      number: 14
+      mode:
+        output: true
+      inverted: true
+      
+  - platform: gpio
+    id: relay_48
+    name: "Relay_48"
+    pin:
+      pcf8574: pcf_3
+      # Use pin number 8
+      number: 15
+      mode:
+        output: true
+      inverted: true

boards/relay24_inputs_PCF.yaml

@@ -1,218 +1,175 @@
+#i2c addresses
+# address: 0x26 input pcf io
+# address: 0x27 input pcf io
+# address: 0x3C input oled
+# address: 0x40 input ina219 power
+# address: 0x68 input rtc ds1307
 
 binary_sensor:
   - platform: gpio
     name: "${node_name} IN_01"
     id: in_01
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 0
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.open: cover_01
-    on_release:
-      then:
-        cover.stop: cover_01
+        - switch.toggle: relay_1
 
   - platform: gpio
     name: "${node_name} IN_02"
     id: in_02
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 1
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.close: cover_01
-    on_release:
-      then:
-        cover.stop: cover_01
+        - switch.toggle: relay_2
 
   - platform: gpio
     name: "${node_name} IN_03"
     id: in_03
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 2
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.open: cover_02
-    on_release:
-      then:
-        cover.stop: cover_02
+        - switch.toggle: relay_3
 
   - platform: gpio
     name: "${node_name} IN_04"
     id: in_04
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 3
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.close: cover_02
-    on_release:
-      then:
-        cover.stop: cover_02
+        - switch.toggle: relay_4
 
   - platform: gpio
     name: "${node_name} IN_05"
     id: in_05
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 4
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.open: cover_03
-    on_release:
-      then:
-        cover.stop: cover_03
+        - switch.toggle: relay_5
 
   - platform: gpio
     name: "${node_name} IN_06"
     id: in_06
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 5
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.close: cover_03
-    on_release:
-      then:
-        cover.stop: cover_03
+        - switch.toggle: relay_6
 
   - platform: gpio
     name: "${node_name} IN_07"
     id: in_07
     pin:
-      mcp23xxx: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 6
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.open: cover_04
-    on_release:
-      then:
-        cover.stop: cover_04
+        - switch.toggle: relay_7
 
   - platform: gpio
     name: "${node_name} IN_08"
     id: in_08
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 7
+      pcf8574: pcf_inputs_1to14
+      number: 8
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.close: cover_04
-    on_release:
-      then:
-        cover.stop: cover_04
+        - switch.toggle: relay_8
 
   - platform: gpio
     name: "${node_name} IN_09"
     id: in_09
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 8
+      pcf8574: pcf_inputs_1to14
+      number: 9
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.open: cover_05
-    on_release:
-      then:
-        cover.stop: cover_05
+        - switch.toggle: relay_9
 
   - platform: gpio
     name: "${node_name} IN_10"
     id: in_10
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 9
+      pcf8574: pcf_inputs_1to14
+      number: 10
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.close: cover_05
-    on_release:
-      then:
-        cover.stop: cover_05
+        - switch.toggle: relay_10
 
   - platform: gpio
     name: "${node_name} IN_11"
     id: in_11
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 10
+      pcf8574: pcf_inputs_1to14
+      number: 11
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.open: cover_06
-    on_release:
-      then:
-        cover.stop: cover_06
+        - switch.toggle: relay_11
 
   - platform: gpio
     name: "${node_name} IN_12"
     id: in_12
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 11
+      pcf8574: pcf_inputs_1to14
+      number: 12
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        cover.close: cover_06
-    on_release:
-      then:
-        cover.stop: cover_06
+        - switch.toggle: relay_12
 
   - platform: gpio
     name: "${node_name} IN_13"
     id: in_13
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 12
+      pcf8574: pcf_inputs_1to14
+      number: 13
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -222,11 +179,10 @@ binary_sensor:
     name: "${node_name} IN_14"
     id: in_14
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 13
+      pcf8574: pcf_inputs_1to14
+      number: 14
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -236,11 +192,10 @@ binary_sensor:
     name: "${node_name} IN_15"
     id: in_15
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 14
+      pcf8574: pcf_inputs_15to28
+      number: 6
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -250,11 +205,10 @@ binary_sensor:
     name: "${node_name} IN_16"
     id: in_16
     pin:
-      mcp23xxx: mcp_inputs_1to16
-      number: 15
+      pcf8574: pcf_inputs_15to28
+      number: 5
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -264,11 +218,10 @@ binary_sensor:
     name: "${node_name} IN_17"
     id: in_17
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 7
+      pcf8574: pcf_inputs_15to28
+      number: 4
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -278,11 +231,10 @@ binary_sensor:
     name: "${node_name} IN_18"
     id: in_18
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 6
+      pcf8574: pcf_inputs_15to28
+      number: 3
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -292,11 +244,10 @@ binary_sensor:
     name: "${node_name} IN_19"
     id: in_19
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 5
+      pcf8574: pcf_inputs_15to28
+      number: 2
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -306,11 +257,10 @@ binary_sensor:
     name: "${node_name} IN_20"
     id: in_20
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 4
+      pcf8574: pcf_inputs_15to28
+      number: 1
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -320,11 +270,10 @@ binary_sensor:
     name: "${node_name} IN_21"
     id: in_21
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 3
+      pcf8574: pcf_inputs_15to28
+      number: 0
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -334,11 +283,10 @@ binary_sensor:
     name: "${node_name} IN_22"
     id: in_22
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 2
+      pcf8574: pcf_inputs_15to28
+      number: 8
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -348,25 +296,23 @@ binary_sensor:
     name: "${node_name} IN_23"
     id: in_23
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 1
+      pcf8574: pcf_inputs_15to28
+      number: 9
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
-        - switch.toggle: relay_22
+        - switch.toggle: relay_23
 
   - platform: gpio
     name: "${node_name} IN_24"
     id: in_24
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 0
+      pcf8574: pcf_inputs_15to28
+      number: 10
       mode:
         input: true
-        pullup: false
       inverted: true
     on_press:
       then:
@@ -376,110 +322,106 @@ binary_sensor:
     name: "${node_name} IN_25"
     id: in_25
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 8
+      pcf8574: pcf_inputs_15to28
+      number: 11
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_25
 
   - platform: gpio
     name: "${node_name} IN_26"
     id: in_26
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 9
+      pcf8574: pcf_inputs_15to28
+      number: 12
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_26
 
   - platform: gpio
     name: "${node_name} IN_27"
     id: in_27
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 10
+      pcf8574: pcf_inputs_15to28
+      number: 13
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_27
 
   - platform: gpio
     name: "${node_name} IN_28"
     id: in_28
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 11
+      pcf8574: pcf_inputs_15to28
+      number: 14
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_28
 
   - platform: gpio
     name: "${node_name} IN_29"
     id: in_29
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 12
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_29
 
   - platform: gpio
     name: "${node_name} IN_30"
     id: in_30
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 13
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_30
 
   - platform: gpio
     name: "${node_name} IN_31"
     id: in_31
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 14
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_31
 
   - platform: gpio
     name: "${node_name} IN_32"
     id: in_32
     pin:
-      mcp23xxx: mcp_inputs_17to32
-      number: 15
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
       mode:
         input: true
-        pullup: false
       inverted: true
-    on_press:
-      then:
-        - switch.toggle: relay_32
+
+  - platform: gpio
+    name: "${node_name} IN_33"
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+      
+  - platform: gpio
+    name: "${node_name} IN_34"
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+      
+  - platform: gpio
+    name: "${node_name} IN_35"
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+

boards/relay24_outputs_MCP.yaml

@@ -0,0 +1,248 @@
+mcp23017:
+  - id: 'mcp_outputs_1to16'
+    address: 0x21
+    i2c_id: bus_b
+  - id: 'mcp_outputs_17to32'
+    address: 0x20
+    i2c_id: bus_b
+
+switch:
+  - platform: gpio
+    id: relay_1
+    name: "${node_name} Relay 01"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 8
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_2
+    name: "${node_name} Relay 02"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 9
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_3
+    name: "${node_name} Relay 03"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 10
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_4
+    name: "${node_name} Relay 04"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 11
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_5
+    name: "${node_name} Relay 05"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 12
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_6
+    name: "${node_name} Relay 06"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 13
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_7
+    name: "${node_name} Relay 07"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 14
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_8
+    name: "${node_name} Relay 08"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 15
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_9
+    name: "${node_name} Relay 09"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 8
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_10
+    name: "${node_name} Relay 10"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 9
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_11
+    name: "${node_name} Relay 11"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 10
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_12
+    name: "${node_name} Relay 12"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 11
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_13
+    name: "${node_name} Relay 13"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 7
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_14
+    name: "${node_name} Relay 14"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 6
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_15
+    name: "${node_name} Relay 15"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 5
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_16
+    name: "${node_name} Relay 16"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 4
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_17
+    name: "${node_name} Relay 17"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 3
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_18
+    name: "${node_name} Relay 18"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 2
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_19
+    name: "${node_name} Relay 19"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 1
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_20
+    name: "${node_name} Relay 20"
+    pin:
+      mcp23xxx: mcp_outputs_1to16
+      number: 0
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_21
+    name: "${node_name} Relay 21"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 12
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_22
+    name: "${node_name} Relay 22"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 13
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_23
+    name: "${node_name} Relay 23"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 14
+      mode:
+        output: true
+      inverted: false
+
+  - platform: gpio
+    id: relay_24
+    name: "${node_name} Relay 24"
+    pin:
+      mcp23xxx: mcp_outputs_17to32
+      number: 15
+      mode:
+        output: true
+      inverted: false

boards/relay32_inputs_PCF.yaml

@@ -10,7 +10,7 @@ binary_sensor:
     name: "${node_name} IN_01"
     id: in_01
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 0
       mode:
         input: true
@@ -23,7 +23,7 @@ binary_sensor:
     name: "${node_name} IN_02"
     id: in_02
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 1
       mode:
         input: true
@@ -36,7 +36,7 @@ binary_sensor:
     name: "${node_name} IN_03"
     id: in_03
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 2
       mode:
         input: true
@@ -49,7 +49,7 @@ binary_sensor:
     name: "${node_name} IN_04"
     id: in_04
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 3
       mode:
         input: true
@@ -62,7 +62,7 @@ binary_sensor:
     name: "${node_name} IN_05"
     id: in_05
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 4
       mode:
         input: true
@@ -75,7 +75,7 @@ binary_sensor:
     name: "${node_name} IN_06"
     id: in_06
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 5
       mode:
         input: true
@@ -88,7 +88,7 @@ binary_sensor:
     name: "${node_name} IN_07"
     id: in_07
     pin:
-      pcf8574: mcp_inputs_1to16
+      pcf8574: pcf_inputs_1to14
       number: 6
       mode:
         input: true
@@ -101,8 +101,8 @@ binary_sensor:
     name: "${node_name} IN_08"
     id: in_08
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 7
+      pcf8574: pcf_inputs_1to14
+      number: 8
       mode:
         input: true
       inverted: true
@@ -114,8 +114,8 @@ binary_sensor:
     name: "${node_name} IN_09"
     id: in_09
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 8
+      pcf8574: pcf_inputs_1to14
+      number: 9
       mode:
         input: true
       inverted: true
@@ -127,8 +127,8 @@ binary_sensor:
     name: "${node_name} IN_10"
     id: in_10
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 9
+      pcf8574: pcf_inputs_1to14
+      number: 10
       mode:
         input: true
       inverted: true
@@ -140,8 +140,8 @@ binary_sensor:
     name: "${node_name} IN_11"
     id: in_11
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 10
+      pcf8574: pcf_inputs_1to14
+      number: 11
       mode:
         input: true
       inverted: true
@@ -153,8 +153,8 @@ binary_sensor:
     name: "${node_name} IN_12"
     id: in_12
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 11
+      pcf8574: pcf_inputs_1to14
+      number: 12
       mode:
         input: true
       inverted: true
@@ -166,8 +166,8 @@ binary_sensor:
     name: "${node_name} IN_13"
     id: in_13
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 12
+      pcf8574: pcf_inputs_1to14
+      number: 13
       mode:
         input: true
       inverted: true
@@ -179,8 +179,8 @@ binary_sensor:
     name: "${node_name} IN_14"
     id: in_14
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 13
+      pcf8574: pcf_inputs_1to14
+      number: 14
       mode:
         input: true
       inverted: true
@@ -192,8 +192,8 @@ binary_sensor:
     name: "${node_name} IN_15"
     id: in_15
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 14
+      pcf8574: pcf_inputs_15to28
+      number: 6
       mode:
         input: true
       inverted: true
@@ -205,8 +205,8 @@ binary_sensor:
     name: "${node_name} IN_16"
     id: in_16
     pin:
-      pcf8574: mcp_inputs_1to16
-      number: 15
+      pcf8574: pcf_inputs_15to28
+      number: 5
       mode:
         input: true
       inverted: true
@@ -218,8 +218,8 @@ binary_sensor:
     name: "${node_name} IN_17"
     id: in_17
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 7
+      pcf8574: pcf_inputs_15to28
+      number: 4
       mode:
         input: true
       inverted: true
@@ -231,8 +231,8 @@ binary_sensor:
     name: "${node_name} IN_18"
     id: in_18
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 6
+      pcf8574: pcf_inputs_15to28
+      number: 3
       mode:
         input: true
       inverted: true
@@ -244,8 +244,8 @@ binary_sensor:
     name: "${node_name} IN_19"
     id: in_19
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 5
+      pcf8574: pcf_inputs_15to28
+      number: 2
       mode:
         input: true
       inverted: true
@@ -257,8 +257,8 @@ binary_sensor:
     name: "${node_name} IN_20"
     id: in_20
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 4
+      pcf8574: pcf_inputs_15to28
+      number: 1
       mode:
         input: true
       inverted: true
@@ -270,8 +270,8 @@ binary_sensor:
     name: "${node_name} IN_21"
     id: in_21
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 3
+      pcf8574: pcf_inputs_15to28
+      number: 0
       mode:
         input: true
       inverted: true
@@ -283,8 +283,8 @@ binary_sensor:
     name: "${node_name} IN_22"
     id: in_22
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 2
+      pcf8574: pcf_inputs_15to28
+      number: 8
       mode:
         input: true
       inverted: true
@@ -296,8 +296,8 @@ binary_sensor:
     name: "${node_name} IN_23"
     id: in_23
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 1
+      pcf8574: pcf_inputs_15to28
+      number: 9
       mode:
         input: true
       inverted: true
@@ -309,8 +309,8 @@ binary_sensor:
     name: "${node_name} IN_24"
     id: in_24
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 0
+      pcf8574: pcf_inputs_15to28
+      number: 10
       mode:
         input: true
       inverted: true
@@ -322,8 +322,8 @@ binary_sensor:
     name: "${node_name} IN_25"
     id: in_25
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 8
+      pcf8574: pcf_inputs_15to28
+      number: 11
       mode:
         input: true
       inverted: true
@@ -335,8 +335,8 @@ binary_sensor:
     name: "${node_name} IN_26"
     id: in_26
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 9
+      pcf8574: pcf_inputs_15to28
+      number: 12
       mode:
         input: true
       inverted: true
@@ -348,8 +348,8 @@ binary_sensor:
     name: "${node_name} IN_27"
     id: in_27
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 10
+      pcf8574: pcf_inputs_15to28
+      number: 13
       mode:
         input: true
       inverted: true
@@ -361,8 +361,8 @@ binary_sensor:
     name: "${node_name} IN_28"
     id: in_28
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 11
+      pcf8574: pcf_inputs_15to28
+      number: 14
       mode:
         input: true
       inverted: true
@@ -374,8 +374,8 @@ binary_sensor:
     name: "${node_name} IN_29"
     id: in_29
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 12
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
       mode:
         input: true
       inverted: true
@@ -387,8 +387,8 @@ binary_sensor:
     name: "${node_name} IN_30"
     id: in_30
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 13
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
       mode:
         input: true
       inverted: true
@@ -400,8 +400,8 @@ binary_sensor:
     name: "${node_name} IN_31"
     id: in_31
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 14
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
       mode:
         input: true
       inverted: true
@@ -413,8 +413,8 @@ binary_sensor:
     name: "${node_name} IN_32"
     id: in_32
     pin:
-      pcf8574: mcp_inputs_17to32
-      number: 15
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
       mode:
         input: true
       inverted: true
@@ -425,7 +425,8 @@ binary_sensor:
   - platform: gpio
     name: "${node_name} IN_33"
     pin:
-      number: GPIO33
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
       mode:
         input: true
       inverted: true
@@ -433,7 +434,8 @@ binary_sensor:
   - platform: gpio
     name: "${node_name} IN_34"
     pin:
-      number: GPIO17
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
       mode:
         input: true
       inverted: true
@@ -441,9 +443,9 @@ binary_sensor:
   - platform: gpio
     name: "${node_name} IN_35"
     pin:
-      number: GPIO12
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
       mode:
         input: true
-        pullup: true
-      inverted: false
+      inverted: true
 

boards/relay32_outputs_MCP.yaml

@@ -2,8 +2,10 @@
 mcp23017:
   - id: 'mcp_outputs_1to16'
     address: 0x21
+    i2c_id: bus_b
   - id: 'mcp_outputs_17to32'
     address: 0x20
+    i2c_id: bus_b
 
 switch:
   - platform: gpio

boards/relay32_outputs_PCF.yaml

@@ -3,9 +3,11 @@ pcf8574:
   - id: 'pcf_1'
     address: 0x21
     pcf8575: true
+    i2c_id: bus_b
   - id: 'pcf_2'
     address: 0x20
-    pcf8575: true 
+    pcf8575: true
+    i2c_id: bus_b 
 
 switch:
     

boards/relay32_outputs_mix_PCF.yaml

@@ -0,0 +1,367 @@
+# 8 covers (16 outputs for covers)
+# 16 outputs as switch
+pcf8574:
+  - id: 'pcf_1'
+    address: 0x21
+    pcf8575: true
+    i2c_id: bus_b
+  - id: 'pcf_2'
+    address: 0x20
+    pcf8575: true
+    i2c_id: bus_b
+
+switch:
+  - platform: gpio
+    id: cover_open_01
+    pin:
+      pcf8574: pcf_1
+      number: 15
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_01 [cover_open_01, cover_close_01]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_01
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 1
+      number: 14
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_01
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_02
+    pin:
+      pcf8574: pcf_1
+      number: 13
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_02 [cover_open_02, cover_close_02]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_02
+    pin:
+      pcf8574: pcf_1
+      number: 12
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_02
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_open_03
+    pin:
+      pcf8574: pcf_1
+      number: 11
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_03 [cover_open_03, cover_close_03]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_03
+    pin:
+      pcf8574: pcf_1
+      number: 10
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_03
+
+  - platform: gpio
+    id: cover_open_04
+    pin:
+      pcf8574: pcf_1
+      number: 9
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_04 [cover_open_04, cover_close_04]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_04
+    pin:
+      pcf8574: pcf_1
+      number: 8
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_04
+
+  - platform: gpio
+    id: cover_open_05
+    pin:
+      pcf8574: pcf_2
+      number: 15
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_05 [cover_open_05, cover_close_05]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_05
+    pin:
+      pcf8574: pcf_2
+      number: 14
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_05
+
+  - platform: gpio
+    id: cover_open_06
+    pin:
+      pcf8574: pcf_2
+      number: 13
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_06 [cover_open_06, cover_close_06]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_06
+    pin:
+      pcf8574: pcf_2
+      number: 12
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_06
+
+  - platform: gpio
+    id: cover_open_07
+    pin:
+      pcf8574: pcf_2
+      number: 11
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_07 [cover_open_07, cover_close_07]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_07
+    pin:
+      pcf8574: pcf_2
+      number: 10
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_07
+
+  - platform: gpio
+    id: cover_open_08
+    pin:
+      pcf8574: pcf_2
+      number: 9
+      mode:
+        output: true
+      inverted: true
+    interlock: &cover_interlock_08 [cover_open_08, cover_close_08]
+    interlock_wait_time: 5ms
+    restore_mode: always off
+
+  - platform: gpio
+    id: cover_close_08
+    pin:
+      pcf8574: pcf_2
+      number: 8
+      mode:
+        output: true
+      inverted: true
+    interlock: *cover_interlock_08
+
+  - platform: gpio
+    id: relay_17
+    name: 'Relay_17'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 15
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_18
+    name: 'Relay_18'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 14
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_19
+    name: 'Relay_19'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 13
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_20
+    name: 'Relay_20'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 12
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_21
+    name: 'Relay_21'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 11
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_22
+    name: 'Relay_22'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 10
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_23
+    name: 'Relay_23'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 9
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_24
+    name: 'Relay_24'
+    pin:
+      pcf8574: pcf_1
+      # Use pin number 8
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_25
+    name: 'Relay_25'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 15
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_26
+    name: 'Relay_26'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 14
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_27
+    name: 'Relay_27'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 13
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_28
+    name: 'Relay_28'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 12
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_29
+    name: 'Relay_29'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 11
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_30
+    name: 'Relay_30'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 10
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_31
+    name: 'Relay_31'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 9
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: relay_32
+    name: 'Relay_32'
+    pin:
+      pcf8574: pcf_2
+      # Use pin number 8
+      number: 7
+      mode:
+        output: true
+      inverted: true

boneIOsample.yaml

@@ -1,45 +0,0 @@
-substitutions:
-  node_name: boneio
-
-packages:
-# devices
-  core: !include devices/wt32_eth01.yaml
-  internals: !include devices/boneio_board_PCF.yaml
-  #internals: !include devices/boneio_board_MCP.yaml
-  temp: !include devices/lm75b.yaml
-  display: !include devices/display.yaml
-  # uart: !include devices/uart.yaml
-  # one_wire: !include devices/one_wire.yaml
-# relay32
-  #output: !include boards/relay32_outputs_MCP.yaml
-  output: !include boards/relay32_outputs_PCF.yaml
-  #input: !include boards/relay32_inputs_MCP.yaml
-  input: !include boards/relay32_inputs_PCF.yaml
-# dimmer led
-  #output: !include boards/dimmer_led8x4_outputs.yaml
-  #input: !include boards/dimmer_led8x4_inputs.yaml
-  #light: !include boards/monochromatic_lights.yaml
-# cover
-  #output: !include boards/cover16_outputs.yaml
-  # input: !include boards/cover16_inputs.yaml
-# cover: !include boards/cover.yaml
-
-logger:
-  baud_rate: 0
-api:
-ota:
-  password: boneio
-# disable web server - for testing only
-web_server:
-  port: 80
-  local: true
-
-time:
-  - platform: homeassistant
-    timezone: Europe/Warsaw
-    id: homeassistant_time
-    # instead try to synchronize via network repeatedly ...
-    on_time_sync:
-      then:
-        # ... and update the RTC when the synchronization was successful
-        ds1307.write_time:

boneio_config_for_console.yaml

@@ -0,0 +1,57 @@
+substitutions:
+  # set to false if you don't want mac suffix in your device name
+  name_add_mac_suffix: 'false'
+  # if you want to change the name of device via OTA you have to set IP first in boneio/devices/wt32_eth01.yaml
+  node_name: boneio
+  dir_name: './'
+
+packages:
+  # select your input board:
+  # input: !include boards/relay24_inputs_PCF.yaml
+  # input: !include boards/relay32_inputs_PCF.yaml
+  # input: !include boards/relay32_inputs_MCP.yaml
+  # input: !include boards/dimmer_led8x4_inputs.yaml
+  # input: !include boards/cover16_inputs_MCP.yaml
+  # input: !include boards/cover16_inputs_PCF.yaml
+  input: !include boards/coverMix_inputs_PCF.yaml
+
+  # select your output board:
+  # output: !include boards/relay24_outputs_MCP.yaml
+  # output: !include boards/relay32_outputs_PCF.yaml
+  # output: !include boards/relay32_outputs_MCP.yaml
+  # output: !include boards/dimmer_led8x4_outputs.yaml
+  # light: !include boards/monochromatic_lights.yaml
+  # cover: !include boards/cover.yaml
+  cover: !include boards/cover_mix.yaml
+  # output: !include boards/cover16_outputs_PCF.yaml
+  # output: !include boards/cover16_outputs_MCP.yaml
+  # output: !include boards/mosfet48_outputs_PCF.yaml
+  output: !include boards/relay32_outputs_mix_PCF.yaml
+
+  # select your devices:
+  core: !include devices/wt32_eth01.yaml
+  internals: !include devices/boneio_board.yaml
+  temp: !include devices/lm75b.yaml
+  display: !include devices/display.yaml
+  # uart: !include devices/uart.yaml
+  # one_wire: !include devices/one_wire.yaml
+
+logger:
+  baud_rate: 0
+api:
+ota:
+  password: boneio
+# disable web server - for testing only
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+    # instead try to synchronize via network repeatedly ...
+    on_time_sync:
+      then:
+        # ... and update the RTC when the synchronization was successful
+        ds1307.write_time:

boneio_config_for_esphome_addon.yaml

@@ -1,25 +1,41 @@
 substitutions:
+  # set to false if you don't want mac suffix in your device name
+  name_add_mac_suffix: 'false'
+  # if you want to change the name of device via OTA you have to set IP first in boneio/devices/wt32_eth01.yaml
   node_name: boneio
+  dir_name: 'boneio/'
 
 packages:
-# devices
+  # select your input board:
+  # input: !include boneio/boards/relay24_inputs_PCF.yaml
+  # input: !include boneio/boards/relay32_inputs_PCF.yaml
+  # input: !include boneio/boards/relay32_inputs_MCP.yaml
+  # input: !include boneio/boards/dimmer_led8x4_inputs.yaml
+  # input: !include boneio/boards/cover16_inputs_MCP.yaml
+  # input: !include boneio/boards/cover16_inputs_PCF.yaml
+  # input: !include boneio/boards/coverMix_inputs_PCF.yaml
+
+  # select your output board:
+  # output: !include boneio/boards/relay24_outputs_MCP.yaml
+  output: !include boneio/boards/relay32_outputs_PCF.yaml
+  # output: !include boneio/boards/relay32_outputs_MCP.yaml
+  # output: !include boneio/boards/dimmer_led8x4_outputs.yaml
+  # light: !include boneio/boards/monochromatic_lights.yaml
+  # cover: !include boneio/boards/cover.yaml
+  # cover: !include boneio/boards/cover_mix.yaml
+  # output: !include boneio/boards/cover16_outputs_PCF.yaml
+  # output: !include boneio/boards/cover16_outputs_MCP.yaml
+  # output: !include boneio/mosfet48_outputs_PCF.yaml
+  # output: !include boneio/relay32_outputs_mix_PCF.yaml
+
+  # select your devices:
   core: !include boneio/devices/wt32_eth01.yaml
   internals: !include boneio/devices/boneio_board.yaml
   temp: !include boneio/devices/lm75b.yaml
   display: !include boneio/devices/display.yaml
   # uart: !include devices/uart.yaml
   # one_wire: !include devices/one_wire.yaml
-# relay32
-  output: !include boneio/boards/relay32_outputs.yaml
-  input: !include boneio/boards/relay32_inputs.yaml
-# dimmer led
-  # output: !include boards/dimmer_led8x4_outputs.yaml
-  # input: !include boards/dimmer_led8x4_inputs.yaml
-  # light: !include boards/monochromatic_lights.yaml
-# cover
-#  output: !include boards/cover16_outputs.yaml
-  # input: !include boards/cover16_inputs.yaml
-# cover: !include boards/cover.yaml
+
 
 logger:
   baud_rate: 0

devices/boneio_board.yaml

@@ -5,11 +5,14 @@
 time:
   - platform: ds1307
     id: ds1307_time
+    address: 0x68
+    i2c_id: bus_a
 
 sensor:
 # Module power consmption
   - platform: ina219
     address: 0x40
+    i2c_id: bus_a
     shunt_resistance: 0.1 ohm
     current:
       id: ina_current
@@ -27,11 +30,26 @@ sensor:
     max_current: 3.2A
     update_interval: 30s
 
+switch:
+  - platform: gpio
+    id: buzzer
+    name: "Buzzer"
+    pin:
+      number: GPIO2
+      mode:
+        output: true
+      inverted: false
 pcf8574:
-  - id: 'mcp_inputs_1to16'
-    address: 0x26
+  - id: 'pcf_inputs_1to14'
+    i2c_id: bus_a
+    address: 0x20
     pcf8575: true
-  - id: 'mcp_inputs_17to32'
-    address: 0x27
+  - id: 'pcf_inputs_15to28'
+    i2c_id: bus_a
+    address: 0x21
     pcf8575: true 
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: bus_a
+    address: 0x22
+    pcf8575: false
 

devices/boneio_board_MCP.yaml

@@ -1,34 +0,0 @@
-#i2c  address: 0x26 input mcp io
-#i2c  address: 0x27 input mcp io
-#i2c  address: 0x40 input ina219 power
-#i2c  address: 0x68 input rtc ds1307
-time:
-  - platform: ds1307
-    id: ds1307_time
-
-sensor:
-# Module power consmption
-  - platform: ina219
-    address: 0x40
-    shunt_resistance: 0.1 ohm
-    current:
-      id: ina_current
-      name: "${node_name} INA219 Current"
-    power:
-      id: ina_power
-      name: "${node_name} INA219 Power"
-    bus_voltage:
-      id: ina_bus_voltage
-      name: "${node_name} INA219 Bus Voltage"
-    shunt_voltage:
-      id: ina_shunt_voltage
-      name: "${node_name} INA219 Shunt Voltage"
-    max_voltage: 32.0V
-    max_current: 3.2A
-    update_interval: 30s
-
-mcp23017:
-  - id: 'mcp_inputs_1to16'
-    address: 0x26
-  - id: 'mcp_inputs_17to32'
-    address: 0x27

devices/display.yaml

@@ -30,7 +30,7 @@ text_sensor:
 
 script:
   - id: screensaver_script
-  # screensaver script, turn on screensaver after 30 seconds, restart counter each time when invoked
+    # screensaver script, turn on screensaver after 30 seconds, restart counter each time when invoked
     mode: restart
     then:
       # set the time after which the screensaver will be activated
@@ -53,17 +53,17 @@ binary_sensor:
     entity_category: config
     id: boneIO_button
     pin:
-      number: GPIO4
+      pcf8574: pcf_inputs_28to35_menu
+      number: 7
       mode:
         input: true
-        pullup: true
       inverted: true
     on_press:
       then:
         # woke up when on the screensaver, as well do not include the logo page and screensaver in a loop when pushing a button
         - if:
             condition:
-          # on the last page go to the first page skipping the screensaver and logo page
+              # on the last page go to the first page skipping the screensaver and logo page
               display.is_displaying_page: last_page
             then:
               - display.page.show: first_page
@@ -71,7 +71,7 @@ binary_sensor:
             else:
               - if:
                   condition:
-                # on the screensaver, show the logo for a while and display the first page
+                    # on the screensaver, show the logo for a while and display the first page
                     display.is_displaying_page: screensaver
                   then:
                     - display.page.show: logo_page
@@ -80,17 +80,20 @@ binary_sensor:
                     - display.page.show: first_page
                     - component.update: oled_display
                   else:
-                # not the last page and screensaver go to the next page
+                    # not the last page and screensaver go to the next page
                     - display.page.show_next: oled_display
                     - component.update: oled_display
           # restart screensaver script
         - script.execute: screensaver_script
 
+          # it.printf(4, 37, id(dejaVuSmall), TextAlign::BASELINE_LEFT ,"IP addr:");
+          # it.printf(124, 37, id(dejaVuSmall), TextAlign::BASELINE_RIGHT ,"%s", id(eth).get_ip_addresses().str().c_str());
 display:
   - platform: ssd1306_i2c
     id: oled_display
-    model: "SH1106 128x64"
+    model: 'SH1106 128x64'
     address: 0x3C
+    i2c_id: bus_b
     contrast: 0.5
     pages:
       - id: logo_page
@@ -103,8 +106,6 @@ display:
           it.rectangle(0, 0, 126, 15);
           it.printf(64,11, id(danubeSmall), TextAlign::BASELINE_CENTER, "BoneIO");
           it.strftime(64, 25, id(dejaVuSmall), TextAlign::BASELINE_CENTER ,"%c", id(ds1307_time).now());
-          it.printf(4, 37, id(dejaVuSmall), TextAlign::BASELINE_LEFT ,"IP addr:");
-          it.printf(124, 37, id(dejaVuSmall), TextAlign::BASELINE_RIGHT ,"%s", id(eth).get_ip_address().str().c_str());
           it.printf(4, 49, id(dejaVuSmall), TextAlign::BASELINE_LEFT ,"Uptime:");
           it.printf(124, 49, id(dejaVuSmall), TextAlign::BASELINE_RIGHT ,"%s", id(wt32_uptime).state.c_str());
           it.printf(4, 61, id(dejaVuSmall), TextAlign::BASELINE_LEFT ,"Temperature:");
@@ -127,12 +128,12 @@ display:
           it.fill(COLOR_OFF);
 
 font:
-  - file: "fonts/DejaVuSans.ttf"
+  - file: '${dir_name}/fonts/DejaVuSans.ttf'
     id: dejaVuSmall
     size: 9
-  - file: "fonts/danube__.ttf"
+  - file: '${dir_name}/fonts/danube__.ttf'
     id: danubeBig
     size: 20
-  - file: "fonts/danube__.ttf"
+  - file: '${dir_name}/fonts/danube__.ttf'
     id: danubeSmall
     size: 9

devices/lm75b.yaml

@@ -10,3 +10,4 @@ sensor:
     id: boneIO_temp
     name: "${node_name} LM75B Temperature"
     update_interval: 30s
+    i2c_id: bus_b

devices/wt32_eth01.yaml

@@ -1,13 +1,21 @@
+i2c:
+  - id: bus_a
+    sda: GPIO14
+    scl: GPIO15
+    scan: True
+    frequency: 400kHz
+  - id: bus_b
+    sda: GPIO17
+    scl: GPIO33
+    scan: True
+    frequency: 400kHz
+
 esphome:
   name: ${node_name}
   platform: ESP32
   board: nodemcu-32s
-
-i2c:
-  sda: GPIO14
-  scl: GPIO15
-  scan: True
-  frequency: 100kHz
+  # set to false if you already added this device to ESPHOME add-on
+  name_add_mac_suffix: ${name_add_mac_suffix}
 
 ethernet:
   id: eth
@@ -17,3 +25,6 @@ ethernet:
   clk_mode: GPIO0_IN
   phy_addr: 1
   power_pin: GPIO16
+
+  # uncomment this line and set your actual IP address before changing name of device
+  # use_address: xxx.xxx.xxx.xxx