Move uart and modbus to main file

Switch dashboard import to latest branch
fix fw
2026-04-10 20:50:02 +02:00 · 2024-05-23 20:11:00 +02:00 · 2024-05-22 19:37:04 +02:00 · 2024-05-22 17:03:31 +02:00 · 2024-05-22 16:59:20 +02:00 · 2024-05-22 12:47:15 +02:00
20 changed files with 317 additions and 81 deletions
--- a/boneio-24x16_switches_v0_5-v0_6.yaml
+++ b/boneio-24x16_switches_v0_5-v0_6.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
        'devices_v0_5-v0_6/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -576,3 +575,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-24x16_switches_v0_7.yaml
+++ b/boneio-24x16_switches_v0_7.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
        'devices_v0_7/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -572,3 +571,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_5-v0_6.yaml
+++ b/boneio-32x10_lights_v0_5-v0_6.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -633,3 +632,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_7.yaml
+++ b/boneio-32x10_lights_v0_7.yaml
@@ -23,31 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
  import_full_config: true

-modbus:
-  send_wait_time: 200ms
-  uart_id: uart_pin14_15
-  id: mod_bus
-
-modbus_controller:
-  - id: sofarsolar
-    address: 0x09
-    modbus_id: mod_bus
-    setup_priority: -10
-    update_interval: 15s
-
 packages:
-  # extra_boneio_package:
-  #   url: github://boneIO-eu/esphome-packages
-  #   file: sofar-inverter-ktl.yaml
-  #   vars:
-  #     sofar_modbus_id: sofarsolar
-
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_7/display.yaml',
@@ -57,7 +39,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -647,3 +628,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_5-v0_6.yaml
+++ b/boneio-32x10_switches_v0_5-v0_6.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -632,3 +631,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_7.yaml
+++ b/boneio-32x10_switches_v0_7.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -628,3 +627,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_lights_v0_5-v0_6.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -737,3 +736,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_7.yaml
+++ b/boneio-cover_mix_lights_v0_7.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -733,3 +732,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_switches_v0_5-v0_6.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -736,3 +735,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_7.yaml
+++ b/boneio-cover_mix_switches_v0_7.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -733,3 +732,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_5-v0_6.yaml
+++ b/boneio-cover_v0_5-v0_6.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_5-v0_6/display.yaml',
@@ -40,7 +40,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -839,3 +838,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_7.yaml
+++ b/boneio-cover_v0_7.yaml
@@ -23,13 +23,13 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.15
    files: [
        'devices/buzzer.yaml',
        'devices_v0_7/display.yaml',
@@ -39,7 +39,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -835,3 +834,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-dimmer_2rgbw-v0_3.yaml
+++ b/boneio-dimmer_2rgbw-v0_3.yaml
@@ -20,7 +20,7 @@ external_components:
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.10
+    ref: v1.0.15
    files:
      [
        'devices/dimmer_serial_no.yaml',
@@ -38,7 +38,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@v1.0.10
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -62,6 +62,13 @@ text_sensor:
    ip_address:
      entity_category: diagnostic
      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min

 binary_sensor:
  - platform: gpio
--- a/boneio-dimmer_4cct-v0_3.yaml
+++ b/boneio-dimmer_4cct-v0_3.yaml
@@ -20,7 +20,7 @@ external_components:
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.10
+    ref: v1.0.15
    files:
      [
        'devices/dimmer_serial_no.yaml',
@@ -38,7 +38,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@v1.0.10
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -58,7 +58,6 @@ text_sensor:
    name: 'boneio-dimmer- Version'
    icon: mdi:cube-outline
    entity_category: diagnostic
-    update_interval: 10m
  - platform: ethernet_info
    ip_address:
      entity_category: diagnostic
@@ -69,7 +68,7 @@ text_sensor:
    entity_category: diagnostic
    lambda: |-
      return id(eth).get_use_address();
-    update_interval: 60s
+    update_interval: 5min

 binary_sensor:
  - platform: gpio
--- a/boneio-dimmer_8ch-v0_3.yaml
+++ b/boneio-dimmer_8ch-v0_3.yaml
@@ -20,7 +20,7 @@ external_components:
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.10
+    ref: v1.0.15
    files:
      [
        'devices/dimmer_serial_no.yaml',
@@ -38,7 +38,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@v1.0.10
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -62,6 +62,13 @@ text_sensor:
    ip_address:
      entity_category: diagnostic
      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min

 binary_sensor:
  - platform: gpio
--- a/devices/dimmer_ina219.yaml
+++ b/devices/dimmer_ina219.yaml
@@ -4,11 +4,12 @@ sensor:
    shunt_resistance: 0.005 ohm
    bus_voltage:
      name: 'VDDL Supply'
-      unit_of_measurement: 'V'
+      entity_category: diagnostic
+    power:
+      name: 'VDDL Power'
      entity_category: diagnostic
    current:
      name: 'VDDL Current'
-      unit_of_measurement: 'A'
      entity_category: diagnostic
    shunt_voltage:
      name: 'VDDL Shunt Voltage'
@@ -21,11 +22,12 @@ sensor:
    shunt_resistance: 0.005 ohm
    bus_voltage:
      name: 'VDDR Supply'
-      unit_of_measurement: 'V'
+      entity_category: diagnostic
+    power:
+      name: 'VDDR Power'
      entity_category: diagnostic
    current:
      name: 'VDDR Current'
-      unit_of_measurement: 'A'
      entity_category: diagnostic
    shunt_voltage:
      name: 'VDDR Shunt Voltage'
--- a/devices/dimmer_serial_no.yaml
+++ b/devices/dimmer_serial_no.yaml
@@ -6,4 +6,4 @@ text_sensor:
      return "dim" + mac.erase(0, mac.length()/2);
    icon: mdi:expansion-card-variant
    entity_category: diagnostic
-    update_interval: 10m
+    update_interval: 10min
--- a/devices_v0_5-v0_6/uart.yaml
+++ b/devices_v0_5-v0_6/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin3_1
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1
--- a/devices_v0_7/one_wire.yaml
+++ b/devices_v0_7/one_wire.yaml
@@ -1,6 +1,5 @@
 dallas:
- pin: GPIO32
-
+  - pin: GPIO32
 # sensor:
 #   - platform: dallas
 #     address: 0x283c01d607d4df28
--- a/devices_v0_7/uart.yaml
+++ b/devices_v0_7/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin14_15
-  rx_pin: GPIO14
-  tx_pin: GPIO15
-  baud_rate: 9600
-  stop_bits: 1
Author	SHA1	Message	Date
pszafer	8412fb6fe5	Move uart and modbus to main file	2024-05-23 20:11:00 +02:00
pszafer	1befa8554a	Switch dashboard import to latest branch	2024-05-22 19:37:04 +02:00
pszafer	3741466e05	fix fw	2024-05-22 17:03:31 +02:00
pszafer	501155c99e	fix ina L power	2024-05-22 16:59:20 +02:00
pszafer	866a2c99ea	Add Power measure to INA	2024-05-22 12:47:15 +02:00
pszafer	6b44f23693	fix serial no	2024-05-22 10:25:02 +02:00