Add mosfet board 48

change to only esp as serial prefix
add serial_prefix to config
2026-04-10 20:50:02 +02:00 · 2024-06-12 10:19:16 +02:00 · 2024-05-27 21:31:27 +02:00 · 2024-05-27 20:32:25 +02:00 · 2024-05-23 20:11:00 +02:00 · 2024-05-22 19:37:04 +02:00
26 changed files with 2470 additions and 118 deletions
--- a/boards/mosfet48_output.yaml
+++ b/boards/mosfet48_output.yaml
@@ -0,0 +1,431 @@
+output:
+  - platform: gpio
+    id: out_01
+    pin:
+      pcf8574: pcf_left
+      number: 7
+      mode:
+        output: true
+      inverted: true
+  - platform: gpio
+    id: out_02
+    pin:
+      pcf8574: pcf_left
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_03
+    pin:
+      pcf8574: pcf_left
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_04
+    pin:
+      pcf8574: pcf_left
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_05
+    pin:
+      pcf8574: pcf_left
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_06
+    pin:
+      pcf8574: pcf_left
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_07
+    pin:
+      pcf8574: pcf_left
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_08
+    pin:
+      pcf8574: pcf_left
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_09
+    pin:
+      pcf8574: pcf_middle
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_10
+    pin:
+      pcf8574: pcf_middle
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_11
+    pin:
+      pcf8574: pcf_middle
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_12
+    pin:
+      pcf8574: pcf_middle
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_13
+    pin:
+      pcf8574: pcf_middle
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_14
+    pin:
+      pcf8574: pcf_middle
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_15
+    pin:
+      pcf8574: pcf_middle
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_16
+    pin:
+      pcf8574: pcf_middle
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_17
+    pin:
+      pcf8574: pcf_right
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_18
+    pin:
+      pcf8574: pcf_right
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_19
+    pin:
+      pcf8574: pcf_right
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_20
+    pin:
+      pcf8574: pcf_right
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_21
+    pin:
+      pcf8574: pcf_right
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_22
+    pin:
+      pcf8574: pcf_right
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_23
+    pin:
+      pcf8574: pcf_right
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_24
+    pin:
+      pcf8574: pcf_right
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_25
+    pin:
+      pcf8574: pcf_left
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_26
+    pin:
+      pcf8574: pcf_left
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_27
+    pin:
+      pcf8574: pcf_left
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_28
+    pin:
+      pcf8574: pcf_left
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_29
+    pin:
+      pcf8574: pcf_left
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_30
+    pin:
+      pcf8574: pcf_left
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_31
+    pin:
+      pcf8574: pcf_left
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_32
+    pin:
+      pcf8574: pcf_left
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_33
+    pin:
+      pcf8574: pcf_middle
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_34
+    pin:
+      pcf8574: pcf_middle
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_35
+    pin:
+      pcf8574: pcf_middle
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_36
+    pin:
+      pcf8574: pcf_middle
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_37
+    pin:
+      pcf8574: pcf_middle
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_38
+    pin:
+      pcf8574: pcf_middle
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_39
+    pin:
+      pcf8574: pcf_middle
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_40
+    pin:
+      pcf8574: pcf_middle
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_41
+    pin:
+      pcf8574: pcf_right
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_42
+    pin:
+      pcf8574: pcf_right
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_43
+    pin:
+      pcf8574: pcf_right
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_44
+    pin:
+      pcf8574: pcf_right
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_45
+    pin:
+      pcf8574: pcf_right
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_46
+    pin:
+      pcf8574: pcf_right
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_47
+    pin:
+      pcf8574: pcf_right
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_48
+    pin:
+      pcf8574: pcf_right
+      number: 15
+      mode:
+        output: true
+      inverted: true
--- a/boneio-24x16_switches_v0_5-v0_6.yaml
+++ b/boneio-24x16_switches_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-24-sw-06
  friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,7 +42,6 @@ packages:
        'devices_v0_5-v0_6/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -576,3 +577,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-24x16_switches_v0_7.yaml
+++ b/boneio-24x16_switches_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-24-sw-07
  friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -39,7 +41,6 @@ packages:
        'devices_v0_7/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -572,3 +573,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_5-v0_6.yaml
+++ b/boneio-32x10_lights_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-l-06
  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,7 +42,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -633,3 +634,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_7.yaml
+++ b/boneio-32x10_lights_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-l-07
  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,33 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
  import_full_config: true

-modbus:
-  send_wait_time: 200ms
-  uart_id: uart_pin14_15
-  id: mod_bus
-
-modbus_controller:
-  - id: sofarsolar
-    address: 0x09
-    modbus_id: mod_bus
-    setup_priority: -10
-    update_interval: 15s
-
 packages:
-  # extra_boneio_package:
-  #   url: github://boneIO-eu/esphome-packages
-  #   file: sofar-inverter-ktl.yaml
-  #   vars:
-  #     sofar_modbus_id: sofarsolar
-
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -57,7 +41,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -647,3 +630,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_5-v0_6.yaml
+++ b/boneio-32x10_switches_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-sw-06
  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,7 +42,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -632,3 +633,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_7.yaml
+++ b/boneio-32x10_switches_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-sw-07
  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -39,7 +41,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -628,3 +629,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_lights_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-l-06
  friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,7 +42,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -737,3 +738,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_7.yaml
+++ b/boneio-cover_mix_lights_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-l-07
  friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -39,7 +41,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -733,3 +734,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_switches_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-sw-06
  friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,7 +42,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -736,3 +737,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_7.yaml
+++ b/boneio-cover_mix_switches_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-sw-07
  friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -39,7 +41,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -733,3 +734,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_5-v0_6.yaml
+++ b/boneio-cover_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-c-06
  friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,7 +42,6 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
@@ -839,3 +840,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_7.yaml
+++ b/boneio-cover_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-c-07
  friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -39,7 +41,6 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
@@ -835,3 +836,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-dimmer_2rgbw-v0_3.yaml
+++ b/boneio-dimmer_2rgbw-v0_3.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-dr-rgbw-03
  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.

 esphome:
  name: '${name}'
@@ -13,17 +14,19 @@ esphome:
 esp32:
  board: esp32dev

+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.7
+    ref: v1.0.16
    files:
      [
-        'devices/dimmer_buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices/dimmer_i2c.yaml',
        'devices/dimmer_ina219.yaml',
-        'devices/dimmer_lm75.yaml',
-        'devices/dimmer_outputs.yaml',
      ]

 ethernet:
@@ -36,7 +39,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@v1.0.7
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -60,6 +63,13 @@ text_sensor:
    ip_address:
      entity_category: diagnostic
      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min

 binary_sensor:
  - platform: gpio
@@ -123,6 +133,49 @@ binary_sensor:
        input: true
      inverted: true

+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
 light:
  - platform: rgbw
    name: 'RGBW L'
@@ -140,3 +193,28 @@ light:
    white: chr04
    default_transition_length: 2s
    gamma_correct: 0
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true
--- a/boneio-dimmer_4cct-v0_3.yaml
+++ b/boneio-dimmer_4cct-v0_3.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-dr-4cct-03
  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.

 esphome:
  name: '${name}'
@@ -13,17 +14,19 @@ esphome:
 esp32:
  board: esp32dev

+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.7
+    ref: v1.0.16
    files:
      [
-        'devices/dimmer_buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices/dimmer_i2c.yaml',
        'devices/dimmer_ina219.yaml',
-        'devices/dimmer_lm75.yaml',
-        'devices/dimmer_outputs.yaml',
      ]

 ethernet:
@@ -36,7 +39,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@v1.0.7
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -60,6 +63,13 @@ text_sensor:
    ip_address:
      entity_category: diagnostic
      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min

 binary_sensor:
  - platform: gpio
@@ -123,6 +133,49 @@ binary_sensor:
        input: true
      inverted: true

+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
 light:
  - platform: cwww
    name: 'CHL_01_02'
@@ -150,3 +203,28 @@ light:
    warm_white: chl04
    cold_white_color_temperature: 6536 K
    warm_white_color_temperature: 2000 K
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true
--- a/boneio-dimmer_8ch-v0_3.yaml
+++ b/boneio-dimmer_8ch-v0_3.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-dr-8ch-03
  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.

 esphome:
  name: '${name}'
@@ -13,17 +14,19 @@ esphome:
 esp32:
  board: esp32dev

+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.7
+    ref: v1.0.16
    files:
      [
-        'devices/dimmer_buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices/dimmer_i2c.yaml',
        'devices/dimmer_ina219.yaml',
-        'devices/dimmer_lm75.yaml',
-        'devices/dimmer_outputs.yaml',
      ]

 ethernet:
@@ -36,7 +39,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@v1.0.7
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -60,6 +63,13 @@ text_sensor:
    ip_address:
      entity_category: diagnostic
      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min

 binary_sensor:
  - platform: gpio
@@ -123,6 +133,49 @@ binary_sensor:
        input: true
      inverted: true

+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
 light:
  - platform: monochromatic
    output: chl01
@@ -173,3 +226,28 @@ light:
    id: chr_04
    default_transition_length: 2s
    gamma_correct: 0
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true
--- a/boneio-mosfet48_lights_v0_7.yaml
+++ b/boneio-mosfet48_lights_v0_7.yaml
@@ -0,0 +1,718 @@
+substitutions:
+  name: boneio-48-l-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Lights'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_lights_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.18
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7/ina219.yaml',
+        'devices_v0_7/lm75b.yaml',
+        'devices_v0_7/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+  reboot_timeout: 0s
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+light:
+  - platform: binary
+    name: 'Light 01'
+    output: out_01
+    id: light_01
+  - platform: binary
+    name: 'Light 02'
+    output: out_02
+    id: light_02
+  - platform: binary
+    name: 'Light 03'
+    output: out_03
+    id: light_03
+  - platform: binary
+    name: 'Light 04'
+    output: out_04
+    id: light_04
+  - platform: binary
+    name: 'Light 05'
+    output: out_05
+    id: light_05
+  - platform: binary
+    name: 'Light 06'
+    output: out_06
+    id: light_06
+  - platform: binary
+    name: 'Light 07'
+    output: out_07
+    id: light_07
+  - platform: binary
+    name: 'Light 08'
+    output: out_08
+    id: light_08
+  - platform: binary
+    name: 'Light 09'
+    output: out_09
+    id: light_09
+  - platform: binary
+    name: 'Light 10'
+    output: out_10
+    id: light_10
+  - platform: binary
+    name: 'Light 11'
+    output: out_11
+    id: light_11
+  - platform: binary
+    name: 'Light 12'
+    output: out_12
+    id: light_12
+  - platform: binary
+    name: 'Light 13'
+    output: out_13
+    id: light_13
+  - platform: binary
+    name: 'Light 14'
+    output: out_14
+    id: light_14
+  - platform: binary
+    name: 'Light 15'
+    output: out_15
+    id: light_15
+  - platform: binary
+    name: 'Light 16'
+    output: out_16
+    id: light_16
+  - platform: binary
+    name: 'Light 17'
+    output: out_17
+    id: light_17
+  - platform: binary
+    name: 'Light 18'
+    output: out_18
+    id: light_18
+  - platform: binary
+    name: 'Light 19'
+    output: out_19
+    id: light_19
+  - platform: binary
+    name: 'Light 20'
+    output: out_20
+    id: light_20
+  - platform: binary
+    name: 'Light 21'
+    output: out_21
+    id: light_21
+  - platform: binary
+    name: 'Light 22'
+    output: out_22
+    id: light_22
+  - platform: binary
+    name: 'Light 23'
+    output: out_23
+    id: light_23
+  - platform: binary
+    name: 'Light 24'
+    output: out_24
+    id: light_24
+  - platform: binary
+    name: 'Light 25'
+    output: out_25
+    id: light_25
+  - platform: binary
+    name: 'Light 26'
+    output: out_26
+    id: light_26
+  - platform: binary
+    name: 'Light 27'
+    output: out_27
+    id: light_27
+  - platform: binary
+    name: 'Light 28'
+    output: out_28
+    id: light_28
+  - platform: binary
+    name: 'Light 29'
+    output: out_29
+    id: light_29
+  - platform: binary
+    name: 'Light 30'
+    output: out_30
+    id: light_30
+  - platform: binary
+    name: 'Light 31'
+    output: out_31
+    id: light_31
+  - platform: binary
+    name: 'Light 32'
+    output: out_32
+    id: light_32
+  - platform: binary
+    name: 'Light 33'
+    output: out_33
+    id: light_33
+  - platform: binary
+    name: 'Light 34'
+    output: out_34
+    id: light_34
+  - platform: binary
+    name: 'Light 35'
+    output: out_35
+    id: light_35
+  - platform: binary
+    name: 'Light 36'
+    output: out_36
+    id: light_36
+  - platform: binary
+    name: 'Light 37'
+    output: out_37
+    id: light_37
+  - platform: binary
+    name: 'Light 38'
+    output: out_38
+    id: light_38
+  - platform: binary
+    name: 'Light 39'
+    output: out_39
+    id: light_39
+  - platform: binary
+    name: 'Light 40'
+    output: out_40
+    id: light_40
+  - platform: binary
+    name: 'Light 41'
+    output: out_41
+    id: light_41
+  - platform: binary
+    name: 'Light 42'
+    output: out_42
+    id: light_42
+  - platform: binary
+    name: 'Light 43'
+    output: out_43
+    id: light_43
+  - platform: binary
+    name: 'Light 44'
+    output: out_44
+    id: light_44
+  - platform: binary
+    name: 'Light 45'
+    output: out_45
+    id: light_45
+  - platform: binary
+    name: 'Light 46'
+    output: out_46
+    id: light_46
+  - platform: binary
+    name: 'Light 47'
+    output: out_47
+    id: light_47
+  - platform: binary
+    name: 'Light 48'
+    output: out_48
+    id: light_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-mosfet48_switches_v0_7.yaml
+++ b/boneio-mosfet48_switches_v0_7.yaml
@@ -0,0 +1,717 @@
+substitutions:
+  name: boneio-48-sw-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Switches'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_switches_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.18
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7/ina219.yaml',
+        'devices_v0_7/lm75b.yaml',
+        'devices_v0_7/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+switch:
+  - platform: output
+    name: 'Switch 01'
+    output: out_01
+    id: switch_01
+  - platform: output
+    name: 'Switch 02'
+    output: out_02
+    id: switch_02
+  - platform: output
+    name: 'Switch 03'
+    output: out_03
+    id: switch_03
+  - platform: output
+    name: 'Switch 04'
+    output: out_04
+    id: switch_04
+  - platform: output
+    name: 'Switch 05'
+    output: out_05
+    id: switch_05
+  - platform: output
+    name: 'Switch 06'
+    output: out_06
+    id: switch_06
+  - platform: output
+    name: 'Switch 07'
+    output: out_07
+    id: switch_07
+  - platform: output
+    name: 'Switch 08'
+    output: out_08
+    id: switch_08
+  - platform: output
+    name: 'Switch 09'
+    output: out_09
+    id: switch_09
+  - platform: output
+    name: 'Switch 10'
+    output: out_10
+    id: switch_10
+  - platform: output
+    name: 'Switch 11'
+    output: out_11
+    id: switch_11
+  - platform: output
+    name: 'Switch 12'
+    output: out_12
+    id: switch_12
+  - platform: output
+    name: 'Switch 13'
+    output: out_13
+    id: switch_13
+  - platform: output
+    name: 'Switch 14'
+    output: out_14
+    id: switch_14
+  - platform: output
+    name: 'Switch 15'
+    output: out_15
+    id: switch_15
+  - platform: output
+    name: 'Switch 16'
+    output: out_16
+    id: switch_16
+  - platform: output
+    name: 'Switch 17'
+    output: out_17
+    id: switch_17
+  - platform: output
+    name: 'Switch 18'
+    output: out_18
+    id: switch_18
+  - platform: output
+    name: 'Switch 19'
+    output: out_19
+    id: switch_19
+  - platform: output
+    name: 'Switch 20'
+    output: out_20
+    id: switch_20
+  - platform: output
+    name: 'Switch 21'
+    output: out_21
+    id: switch_21
+  - platform: output
+    name: 'Switch 22'
+    output: out_22
+    id: switch_22
+  - platform: output
+    name: 'Switch 23'
+    output: out_23
+    id: switch_23
+  - platform: output
+    name: 'Switch 24'
+    output: out_24
+    id: switch_24
+  - platform: output
+    name: 'Switch 25'
+    output: out_25
+    id: switch_25
+  - platform: output
+    name: 'Switch 26'
+    output: out_26
+    id: switch_26
+  - platform: output
+    name: 'Switch 27'
+    output: out_27
+    id: switch_27
+  - platform: output
+    name: 'Switch 28'
+    output: out_28
+    id: switch_28
+  - platform: output
+    name: 'Switch 29'
+    output: out_29
+    id: switch_29
+  - platform: output
+    name: 'Switch 30'
+    output: out_30
+    id: switch_30
+  - platform: output
+    name: 'Switch 31'
+    output: out_31
+    id: switch_31
+  - platform: output
+    name: 'Switch 32'
+    output: out_32
+    id: switch_32
+  - platform: output
+    name: 'Switch 33'
+    output: out_33
+    id: switch_33
+  - platform: output
+    name: 'Switch 34'
+    output: out_34
+    id: switch_34
+  - platform: output
+    name: 'Switch 35'
+    output: out_35
+    id: switch_35
+  - platform: output
+    name: 'Switch 36'
+    output: out_36
+    id: switch_36
+  - platform: output
+    name: 'Switch 37'
+    output: out_37
+    id: switch_37
+  - platform: output
+    name: 'Switch 38'
+    output: out_38
+    id: switch_38
+  - platform: output
+    name: 'Switch 39'
+    output: out_39
+    id: switch_39
+  - platform: output
+    name: 'Switch 40'
+    output: out_40
+    id: switch_40
+  - platform: output
+    name: 'Switch 41'
+    output: out_41
+    id: switch_41
+  - platform: output
+    name: 'Switch 42'
+    output: out_42
+    id: switch_42
+  - platform: output
+    name: 'Switch 43'
+    output: out_43
+    id: switch_43
+  - platform: output
+    name: 'Switch 44'
+    output: out_44
+    id: switch_44
+  - platform: output
+    name: 'Switch 45'
+    output: out_45
+    id: switch_45
+  - platform: output
+    name: 'Switch 46'
+    output: out_46
+    id: switch_46
+  - platform: output
+    name: 'Switch 47'
+    output: out_47
+    id: switch_47
+  - platform: output
+    name: 'Switch 48'
+    output: out_48
+    id: switch_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/devices/dimmer_buzzer.yaml
+++ b/devices/dimmer_buzzer.yaml
@@ -1,10 +0,0 @@
-switch:
-  - platform: gpio
-    id: buzzer
-    name: 'Buzzer'
-    pin:
-      pcf8574: pcf_inputs
-      number: 0
-      mode:
-        output: true
-      inverted: true
--- a/devices/dimmer_ina219.yaml
+++ b/devices/dimmer_ina219.yaml
@@ -4,32 +4,34 @@ sensor:
    shunt_resistance: 0.005 ohm
    bus_voltage:
      name: 'VDDL Supply'
-      unit_of_measurement: 'V'
+      entity_category: diagnostic
+    power:
+      name: 'VDDL Power'
      entity_category: diagnostic
    current:
      name: 'VDDL Current'
-      unit_of_measurement: 'A'
      entity_category: diagnostic
    shunt_voltage:
      name: 'VDDL Shunt Voltage'
      entity_category: diagnostic
    max_voltage: 32V
-    max_current: 3.2A
+    max_current: 10A
    update_interval: 5s
  - platform: ina219
    address: 0x41
    shunt_resistance: 0.005 ohm
    bus_voltage:
      name: 'VDDR Supply'
-      unit_of_measurement: 'V'
+      entity_category: diagnostic
+    power:
+      name: 'VDDR Power'
      entity_category: diagnostic
    current:
      name: 'VDDR Current'
-      unit_of_measurement: 'A'
      entity_category: diagnostic
    shunt_voltage:
      name: 'VDDR Shunt Voltage'
      entity_category: diagnostic
    max_voltage: 32V
-    max_current: 3.2A
+    max_current: 10A
    update_interval: 5s
--- a/devices/dimmer_lm75.yaml
+++ b/devices/dimmer_lm75.yaml
@@ -1,19 +0,0 @@
-#i2c address: 0x48 output lm75b temp
-#LM75B
-external_components:
-  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
-    components: [lm75]
-
-sensor:
-  - platform: lm75
-    id: boneIO_temp
-    name: 'Temperature'
-    update_interval: 30s
-    entity_category: diagnostic
-    on_value_range:
-      - above: 70.0
-        then:
-          - switch.turn_on: buzzer
-      - below: 70.0
-        then:
-          - switch.turn_off: buzzer
--- a/devices/serial_no.yaml
+++ b/devices/serial_no.yaml
@@ -0,0 +1,9 @@
+text_sensor:
+  - platform: template
+    name: 'Serial No.'
+    lambda: |-
+      std::string mac = get_mac_address();
+      return to_string("${serial_prefix}") + mac.erase(0, mac.length()/2);
+    icon: mdi:expansion-card-variant
+    entity_category: diagnostic
+    update_interval: 60min
--- a/devices_v0_5-v0_6/uart.yaml
+++ b/devices_v0_5-v0_6/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin3_1
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1
--- a/devices_v0_7/one_wire.yaml
+++ b/devices_v0_7/one_wire.yaml
@@ -1,6 +1,5 @@
 dallas:
- pin: GPIO32
-
+  - pin: GPIO32
 # sensor:
 #   - platform: dallas
 #     address: 0x283c01d607d4df28
--- a/devices_v0_7/pcf_mosfet.yaml
+++ b/devices_v0_7/pcf_mosfet.yaml
@@ -0,0 +1,25 @@
+pcf8574:
+  - id: 'pcf_inputs_1to14'
+    i2c_id: i2c_bus
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_inputs_15to28'
+    i2c_id: i2c_bus
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: i2c_bus
+    address: 0x22
+    pcf8575: false
+  - id: 'pcf_left'
+    address: 0x23
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_middle'
+    address: 0x24
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_right'
+    address: 0x25
+    pcf8575: true
+    i2c_id: i2c_bus
--- a/devices_v0_7/uart.yaml
+++ b/devices_v0_7/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin14_15
-  rx_pin: GPIO14
-  tx_pin: GPIO15
-  baud_rate: 9600
-  stop_bits: 1
Author	SHA1	Message	Date
pszafer	bda1bc7450	Add mosfet board 48	2024-06-12 10:19:16 +02:00
pszafer	ace9718634	change to only esp as serial prefix	2024-05-27 21:31:27 +02:00
pszafer	206a1912f2	add serial_prefix to config	2024-05-27 20:32:25 +02:00
pszafer	8412fb6fe5	Move uart and modbus to main file	2024-05-23 20:11:00 +02:00
pszafer	1befa8554a	Switch dashboard import to latest branch	2024-05-22 19:37:04 +02:00
pszafer	3741466e05	fix fw	2024-05-22 17:03:31 +02:00
pszafer	501155c99e	fix ina L power	2024-05-22 16:59:20 +02:00
pszafer	866a2c99ea	Add Power measure to INA	2024-05-22 12:47:15 +02:00
pszafer	6b44f23693	fix serial no	2024-05-22 10:25:02 +02:00
pszafer	ac9c9d6ac5	dimmer serial no	2024-05-22 10:00:46 +02:00
pszafer	8733d0f625	add serial number	2024-05-22 09:59:52 +02:00
pszafer	9a5c78334d	fix INA to 10A	2024-05-22 09:59:44 +02:00
pszafer	28c60689c6	Dimmer output	2024-05-20 13:10:50 +02:00
pszafer	3ac8e38f75	move dimmer and buzzer to main dimmer file	2024-05-20 09:07:31 +02:00