Compability fix with Esphome 2024.6

boards/mosfet48_output.yaml

@@ -0,0 +1,431 @@
+output:
+  - platform: gpio
+    id: out_01
+    pin:
+      pcf8574: pcf_left
+      number: 7
+      mode:
+        output: true
+      inverted: true
+  - platform: gpio
+    id: out_02
+    pin:
+      pcf8574: pcf_left
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_03
+    pin:
+      pcf8574: pcf_left
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_04
+    pin:
+      pcf8574: pcf_left
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_05
+    pin:
+      pcf8574: pcf_left
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_06
+    pin:
+      pcf8574: pcf_left
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_07
+    pin:
+      pcf8574: pcf_left
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_08
+    pin:
+      pcf8574: pcf_left
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_09
+    pin:
+      pcf8574: pcf_middle
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_10
+    pin:
+      pcf8574: pcf_middle
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_11
+    pin:
+      pcf8574: pcf_middle
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_12
+    pin:
+      pcf8574: pcf_middle
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_13
+    pin:
+      pcf8574: pcf_middle
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_14
+    pin:
+      pcf8574: pcf_middle
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_15
+    pin:
+      pcf8574: pcf_middle
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_16
+    pin:
+      pcf8574: pcf_middle
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_17
+    pin:
+      pcf8574: pcf_right
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_18
+    pin:
+      pcf8574: pcf_right
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_19
+    pin:
+      pcf8574: pcf_right
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_20
+    pin:
+      pcf8574: pcf_right
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_21
+    pin:
+      pcf8574: pcf_right
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_22
+    pin:
+      pcf8574: pcf_right
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_23
+    pin:
+      pcf8574: pcf_right
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_24
+    pin:
+      pcf8574: pcf_right
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_25
+    pin:
+      pcf8574: pcf_left
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_26
+    pin:
+      pcf8574: pcf_left
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_27
+    pin:
+      pcf8574: pcf_left
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_28
+    pin:
+      pcf8574: pcf_left
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_29
+    pin:
+      pcf8574: pcf_left
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_30
+    pin:
+      pcf8574: pcf_left
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_31
+    pin:
+      pcf8574: pcf_left
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_32
+    pin:
+      pcf8574: pcf_left
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_33
+    pin:
+      pcf8574: pcf_middle
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_34
+    pin:
+      pcf8574: pcf_middle
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_35
+    pin:
+      pcf8574: pcf_middle
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_36
+    pin:
+      pcf8574: pcf_middle
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_37
+    pin:
+      pcf8574: pcf_middle
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_38
+    pin:
+      pcf8574: pcf_middle
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_39
+    pin:
+      pcf8574: pcf_middle
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_40
+    pin:
+      pcf8574: pcf_middle
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_41
+    pin:
+      pcf8574: pcf_right
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_42
+    pin:
+      pcf8574: pcf_right
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_43
+    pin:
+      pcf8574: pcf_right
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_44
+    pin:
+      pcf8574: pcf_right
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_45
+    pin:
+      pcf8574: pcf_right
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_46
+    pin:
+      pcf8574: pcf_right
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_47
+    pin:
+      pcf8574: pcf_right
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_48
+    pin:
+      pcf8574: pcf_right
+      number: 15
+      mode:
+        output: true
+      inverted: true

boneio-24x16_switches_v0_5-v0_6.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-24-sw-06
   friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
         'devices_v0_5-v0_6/pcf_with_mcp.yaml',
         'boards/24x16_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -576,3 +578,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-24x16_switches_v0_7.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-24-sw-07
   friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -39,12 +41,12 @@ packages:
         'devices_v0_7/pcf_with_mcp.yaml',
         'boards/24x16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -572,3 +574,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_lights_v0_5-v0_6.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-32-l-06
   friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -40,13 +42,13 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
   baud_rate: 0 #IMPORTANT FOR V0.5-V0.6 TO GET MODBUS WORKING
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -633,3 +635,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_lights_v0_7.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-32-l-07
   friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,33 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
   import_full_config: true
 
-modbus:
-  send_wait_time: 200ms
-  uart_id: uart_pin14_15
-  id: mod_bus
-
-modbus_controller:
-  - id: sofarsolar
-    address: 0x09
-    modbus_id: mod_bus
-    setup_priority: -10
-    update_interval: 15s
-
 packages:
-  # extra_boneio_package:
-  #   url: github://boneIO-eu/esphome-packages
-  #   file: sofar-inverter-ktl.yaml
-  #   vars:
-  #     sofar_modbus_id: sofarsolar
-
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -57,13 +41,13 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
   reboot_timeout: 0s
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -647,3 +631,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_switches_v0_5-v0_6.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-32-sw-06
   friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -632,3 +634,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_switches_v0_7.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-32-sw-07
   friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -39,12 +41,12 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -628,3 +630,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_lights_v0_5-v0_6.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-cm-l-06
   friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -737,3 +739,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_lights_v0_7.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-cm-l-07
   friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -39,12 +41,12 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -733,3 +735,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_switches_v0_5-v0_6.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-cm-sw-06
   friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -736,3 +738,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_switches_v0_7.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-cm-sw-07
   friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -39,12 +41,12 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -733,3 +735,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_v0_5-v0_6.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-c-06
   friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/16_cover_pcf.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -839,3 +841,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_v0_7.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-c-07
   friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.1.0
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -39,12 +41,12 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/16_cover_pcf.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -835,3 +837,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-dimmer_2rgbw-v0_3.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-dr-rgbw-03
   friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -20,8 +21,13 @@ external_components:
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.9
+    ref: v1.1.0
-    files: ['devices/dimmer_i2c.yaml', 'devices/dimmer_ina219.yaml']
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
 
 ethernet:
   id: eth
@@ -33,7 +39,7 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@v1.0.9
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@latest
   import_full_config: true
 
 pcf8574:
@@ -43,6 +49,7 @@ pcf8574:
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -57,6 +64,13 @@ text_sensor:
     ip_address:
       entity_category: diagnostic
       name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
 
 binary_sensor:
   - platform: gpio

boneio-dimmer_4cct-v0_3.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-dr-4cct-03
   friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -20,8 +21,13 @@ external_components:
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.9
+    ref: v1.1.0
-    files: ['devices/dimmer_i2c.yaml', 'devices/dimmer_ina219.yaml']
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
 
 ethernet:
   id: eth
@@ -33,7 +39,7 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@v1.0.9
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@latest
   import_full_config: true
 
 pcf8574:
@@ -43,6 +49,7 @@ pcf8574:
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -57,6 +64,13 @@ text_sensor:
     ip_address:
       entity_category: diagnostic
       name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
 
 binary_sensor:
   - platform: gpio
@@ -179,15 +193,15 @@ light:
 
   - platform: cwww
     name: 'CHR_01_02'
-    cold_white: chl01
+    cold_white: chr01
-    warm_white: chl02
+    warm_white: chr02
     cold_white_color_temperature: 6536 K
     warm_white_color_temperature: 2000 K
 
   - platform: cwww
     name: 'CHR_03_04'
-    cold_white: chl03
+    cold_white: chr03
-    warm_white: chl04
+    warm_white: chr04
     cold_white_color_temperature: 6536 K
     warm_white_color_temperature: 2000 K
 

boneio-dimmer_8ch-v0_3.yaml

@@ -1,6 +1,7 @@
 substitutions:
   name: boneio-dr-8ch-03
   friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
 
 esphome:
   name: '${name}'
@@ -20,8 +21,13 @@ external_components:
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.9
+    ref: v1.1.0
-    files: ['devices/dimmer_i2c.yaml', 'devices/dimmer_ina219.yaml']
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
 
 ethernet:
   id: eth
@@ -33,7 +39,7 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@v1.0.9
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
   import_full_config: true
 
 pcf8574:
@@ -43,6 +49,7 @@ pcf8574:
 logger:
 api:
 ota:
+  platform: esphome
 
 web_server:
   port: 80
@@ -57,6 +64,13 @@ text_sensor:
     ip_address:
       entity_category: diagnostic
       name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
 
 binary_sensor:
   - platform: gpio

boneio-mosfet48_lights_v0_7.yaml

@@ -0,0 +1,719 @@
+substitutions:
+  name: boneio-48-l-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Lights'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_lights_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.1.0
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7/ina219.yaml',
+        'devices_v0_7/lm75b.yaml',
+        'devices_v0_7/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+  reboot_timeout: 0s
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+light:
+  - platform: binary
+    name: 'Light 01'
+    output: out_01
+    id: light_01
+  - platform: binary
+    name: 'Light 02'
+    output: out_02
+    id: light_02
+  - platform: binary
+    name: 'Light 03'
+    output: out_03
+    id: light_03
+  - platform: binary
+    name: 'Light 04'
+    output: out_04
+    id: light_04
+  - platform: binary
+    name: 'Light 05'
+    output: out_05
+    id: light_05
+  - platform: binary
+    name: 'Light 06'
+    output: out_06
+    id: light_06
+  - platform: binary
+    name: 'Light 07'
+    output: out_07
+    id: light_07
+  - platform: binary
+    name: 'Light 08'
+    output: out_08
+    id: light_08
+  - platform: binary
+    name: 'Light 09'
+    output: out_09
+    id: light_09
+  - platform: binary
+    name: 'Light 10'
+    output: out_10
+    id: light_10
+  - platform: binary
+    name: 'Light 11'
+    output: out_11
+    id: light_11
+  - platform: binary
+    name: 'Light 12'
+    output: out_12
+    id: light_12
+  - platform: binary
+    name: 'Light 13'
+    output: out_13
+    id: light_13
+  - platform: binary
+    name: 'Light 14'
+    output: out_14
+    id: light_14
+  - platform: binary
+    name: 'Light 15'
+    output: out_15
+    id: light_15
+  - platform: binary
+    name: 'Light 16'
+    output: out_16
+    id: light_16
+  - platform: binary
+    name: 'Light 17'
+    output: out_17
+    id: light_17
+  - platform: binary
+    name: 'Light 18'
+    output: out_18
+    id: light_18
+  - platform: binary
+    name: 'Light 19'
+    output: out_19
+    id: light_19
+  - platform: binary
+    name: 'Light 20'
+    output: out_20
+    id: light_20
+  - platform: binary
+    name: 'Light 21'
+    output: out_21
+    id: light_21
+  - platform: binary
+    name: 'Light 22'
+    output: out_22
+    id: light_22
+  - platform: binary
+    name: 'Light 23'
+    output: out_23
+    id: light_23
+  - platform: binary
+    name: 'Light 24'
+    output: out_24
+    id: light_24
+  - platform: binary
+    name: 'Light 25'
+    output: out_25
+    id: light_25
+  - platform: binary
+    name: 'Light 26'
+    output: out_26
+    id: light_26
+  - platform: binary
+    name: 'Light 27'
+    output: out_27
+    id: light_27
+  - platform: binary
+    name: 'Light 28'
+    output: out_28
+    id: light_28
+  - platform: binary
+    name: 'Light 29'
+    output: out_29
+    id: light_29
+  - platform: binary
+    name: 'Light 30'
+    output: out_30
+    id: light_30
+  - platform: binary
+    name: 'Light 31'
+    output: out_31
+    id: light_31
+  - platform: binary
+    name: 'Light 32'
+    output: out_32
+    id: light_32
+  - platform: binary
+    name: 'Light 33'
+    output: out_33
+    id: light_33
+  - platform: binary
+    name: 'Light 34'
+    output: out_34
+    id: light_34
+  - platform: binary
+    name: 'Light 35'
+    output: out_35
+    id: light_35
+  - platform: binary
+    name: 'Light 36'
+    output: out_36
+    id: light_36
+  - platform: binary
+    name: 'Light 37'
+    output: out_37
+    id: light_37
+  - platform: binary
+    name: 'Light 38'
+    output: out_38
+    id: light_38
+  - platform: binary
+    name: 'Light 39'
+    output: out_39
+    id: light_39
+  - platform: binary
+    name: 'Light 40'
+    output: out_40
+    id: light_40
+  - platform: binary
+    name: 'Light 41'
+    output: out_41
+    id: light_41
+  - platform: binary
+    name: 'Light 42'
+    output: out_42
+    id: light_42
+  - platform: binary
+    name: 'Light 43'
+    output: out_43
+    id: light_43
+  - platform: binary
+    name: 'Light 44'
+    output: out_44
+    id: light_44
+  - platform: binary
+    name: 'Light 45'
+    output: out_45
+    id: light_45
+  - platform: binary
+    name: 'Light 46'
+    output: out_46
+    id: light_46
+  - platform: binary
+    name: 'Light 47'
+    output: out_47
+    id: light_47
+  - platform: binary
+    name: 'Light 48'
+    output: out_48
+    id: light_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-mosfet48_switches_v0_7.yaml

@@ -0,0 +1,718 @@
+substitutions:
+  name: boneio-48-sw-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Switches'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_switches_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.1.0
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7/ina219.yaml',
+        'devices_v0_7/lm75b.yaml',
+        'devices_v0_7/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+switch:
+  - platform: output
+    name: 'Switch 01'
+    output: out_01
+    id: switch_01
+  - platform: output
+    name: 'Switch 02'
+    output: out_02
+    id: switch_02
+  - platform: output
+    name: 'Switch 03'
+    output: out_03
+    id: switch_03
+  - platform: output
+    name: 'Switch 04'
+    output: out_04
+    id: switch_04
+  - platform: output
+    name: 'Switch 05'
+    output: out_05
+    id: switch_05
+  - platform: output
+    name: 'Switch 06'
+    output: out_06
+    id: switch_06
+  - platform: output
+    name: 'Switch 07'
+    output: out_07
+    id: switch_07
+  - platform: output
+    name: 'Switch 08'
+    output: out_08
+    id: switch_08
+  - platform: output
+    name: 'Switch 09'
+    output: out_09
+    id: switch_09
+  - platform: output
+    name: 'Switch 10'
+    output: out_10
+    id: switch_10
+  - platform: output
+    name: 'Switch 11'
+    output: out_11
+    id: switch_11
+  - platform: output
+    name: 'Switch 12'
+    output: out_12
+    id: switch_12
+  - platform: output
+    name: 'Switch 13'
+    output: out_13
+    id: switch_13
+  - platform: output
+    name: 'Switch 14'
+    output: out_14
+    id: switch_14
+  - platform: output
+    name: 'Switch 15'
+    output: out_15
+    id: switch_15
+  - platform: output
+    name: 'Switch 16'
+    output: out_16
+    id: switch_16
+  - platform: output
+    name: 'Switch 17'
+    output: out_17
+    id: switch_17
+  - platform: output
+    name: 'Switch 18'
+    output: out_18
+    id: switch_18
+  - platform: output
+    name: 'Switch 19'
+    output: out_19
+    id: switch_19
+  - platform: output
+    name: 'Switch 20'
+    output: out_20
+    id: switch_20
+  - platform: output
+    name: 'Switch 21'
+    output: out_21
+    id: switch_21
+  - platform: output
+    name: 'Switch 22'
+    output: out_22
+    id: switch_22
+  - platform: output
+    name: 'Switch 23'
+    output: out_23
+    id: switch_23
+  - platform: output
+    name: 'Switch 24'
+    output: out_24
+    id: switch_24
+  - platform: output
+    name: 'Switch 25'
+    output: out_25
+    id: switch_25
+  - platform: output
+    name: 'Switch 26'
+    output: out_26
+    id: switch_26
+  - platform: output
+    name: 'Switch 27'
+    output: out_27
+    id: switch_27
+  - platform: output
+    name: 'Switch 28'
+    output: out_28
+    id: switch_28
+  - platform: output
+    name: 'Switch 29'
+    output: out_29
+    id: switch_29
+  - platform: output
+    name: 'Switch 30'
+    output: out_30
+    id: switch_30
+  - platform: output
+    name: 'Switch 31'
+    output: out_31
+    id: switch_31
+  - platform: output
+    name: 'Switch 32'
+    output: out_32
+    id: switch_32
+  - platform: output
+    name: 'Switch 33'
+    output: out_33
+    id: switch_33
+  - platform: output
+    name: 'Switch 34'
+    output: out_34
+    id: switch_34
+  - platform: output
+    name: 'Switch 35'
+    output: out_35
+    id: switch_35
+  - platform: output
+    name: 'Switch 36'
+    output: out_36
+    id: switch_36
+  - platform: output
+    name: 'Switch 37'
+    output: out_37
+    id: switch_37
+  - platform: output
+    name: 'Switch 38'
+    output: out_38
+    id: switch_38
+  - platform: output
+    name: 'Switch 39'
+    output: out_39
+    id: switch_39
+  - platform: output
+    name: 'Switch 40'
+    output: out_40
+    id: switch_40
+  - platform: output
+    name: 'Switch 41'
+    output: out_41
+    id: switch_41
+  - platform: output
+    name: 'Switch 42'
+    output: out_42
+    id: switch_42
+  - platform: output
+    name: 'Switch 43'
+    output: out_43
+    id: switch_43
+  - platform: output
+    name: 'Switch 44'
+    output: out_44
+    id: switch_44
+  - platform: output
+    name: 'Switch 45'
+    output: out_45
+    id: switch_45
+  - platform: output
+    name: 'Switch 46'
+    output: out_46
+    id: switch_46
+  - platform: output
+    name: 'Switch 47'
+    output: out_47
+    id: switch_47
+  - platform: output
+    name: 'Switch 48'
+    output: out_48
+    id: switch_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

devices/dimmer_ina219.yaml

@@ -4,32 +4,34 @@ sensor:
     shunt_resistance: 0.005 ohm
     bus_voltage:
       name: 'VDDL Supply'
-      unit_of_measurement: 'V'
+      entity_category: diagnostic
+    power:
+      name: 'VDDL Power'
       entity_category: diagnostic
     current:
       name: 'VDDL Current'
-      unit_of_measurement: 'A'
       entity_category: diagnostic
     shunt_voltage:
       name: 'VDDL Shunt Voltage'
       entity_category: diagnostic
     max_voltage: 32V
-    max_current: 3.2A
+    max_current: 10A
     update_interval: 5s
   - platform: ina219
     address: 0x41
     shunt_resistance: 0.005 ohm
     bus_voltage:
       name: 'VDDR Supply'
-      unit_of_measurement: 'V'
+      entity_category: diagnostic
+    power:
+      name: 'VDDR Power'
       entity_category: diagnostic
     current:
       name: 'VDDR Current'
-      unit_of_measurement: 'A'
       entity_category: diagnostic
     shunt_voltage:
       name: 'VDDR Shunt Voltage'
       entity_category: diagnostic
     max_voltage: 32V
-    max_current: 3.2A
+    max_current: 10A
     update_interval: 5s

devices/serial_no.yaml

@@ -0,0 +1,9 @@
+text_sensor:
+  - platform: template
+    name: 'Serial No.'
+    lambda: |-
+      std::string mac = get_mac_address();
+      return to_string("${serial_prefix}") + mac.erase(0, mac.length()/2);
+    icon: mdi:expansion-card-variant
+    entity_category: diagnostic
+    update_interval: 60min

devices_v0_5-v0_6/uart.yaml

@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin3_1
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1

devices_v0_7/one_wire.yaml

@@ -1,6 +1,5 @@
 dallas:
-- pin: GPIO32
+  - pin: GPIO32
-
 # sensor:
 #   - platform: dallas
 #     address: 0x283c01d607d4df28

devices_v0_7/pcf_mosfet.yaml

@@ -0,0 +1,25 @@
+pcf8574:
+  - id: 'pcf_inputs_1to14'
+    i2c_id: i2c_bus
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_inputs_15to28'
+    i2c_id: i2c_bus
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: i2c_bus
+    address: 0x22
+    pcf8575: false
+  - id: 'pcf_left'
+    address: 0x23
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_middle'
+    address: 0x24
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_right'
+    address: 0x25
+    pcf8575: true
+    i2c_id: i2c_bus

devices_v0_7/uart.yaml

@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin14_15
-  rx_pin: GPIO14
-  tx_pin: GPIO15
-  baud_rate: 9600
-  stop_bits: 1