Add mosfet board 48

boards/8_covers_16_output.yaml

@@ -184,15 +184,6 @@ switch:
     restore_mode: always off
 
 output:
-  - platform: gpio
-    id: out_16
-    pin:
-      pcf8574: pcf_right
-      number: 8
-      mode:
-        output: true
-      inverted: true
-
   - platform: gpio
     id: out_17
     pin:

boards/mosfet48_output.yaml

@@ -0,0 +1,431 @@
+output:
+  - platform: gpio
+    id: out_01
+    pin:
+      pcf8574: pcf_left
+      number: 7
+      mode:
+        output: true
+      inverted: true
+  - platform: gpio
+    id: out_02
+    pin:
+      pcf8574: pcf_left
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_03
+    pin:
+      pcf8574: pcf_left
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_04
+    pin:
+      pcf8574: pcf_left
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_05
+    pin:
+      pcf8574: pcf_left
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_06
+    pin:
+      pcf8574: pcf_left
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_07
+    pin:
+      pcf8574: pcf_left
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_08
+    pin:
+      pcf8574: pcf_left
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_09
+    pin:
+      pcf8574: pcf_middle
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_10
+    pin:
+      pcf8574: pcf_middle
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_11
+    pin:
+      pcf8574: pcf_middle
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_12
+    pin:
+      pcf8574: pcf_middle
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_13
+    pin:
+      pcf8574: pcf_middle
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_14
+    pin:
+      pcf8574: pcf_middle
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_15
+    pin:
+      pcf8574: pcf_middle
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_16
+    pin:
+      pcf8574: pcf_middle
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_17
+    pin:
+      pcf8574: pcf_right
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_18
+    pin:
+      pcf8574: pcf_right
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_19
+    pin:
+      pcf8574: pcf_right
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_20
+    pin:
+      pcf8574: pcf_right
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_21
+    pin:
+      pcf8574: pcf_right
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_22
+    pin:
+      pcf8574: pcf_right
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_23
+    pin:
+      pcf8574: pcf_right
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_24
+    pin:
+      pcf8574: pcf_right
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_25
+    pin:
+      pcf8574: pcf_left
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_26
+    pin:
+      pcf8574: pcf_left
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_27
+    pin:
+      pcf8574: pcf_left
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_28
+    pin:
+      pcf8574: pcf_left
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_29
+    pin:
+      pcf8574: pcf_left
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_30
+    pin:
+      pcf8574: pcf_left
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_31
+    pin:
+      pcf8574: pcf_left
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_32
+    pin:
+      pcf8574: pcf_left
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_33
+    pin:
+      pcf8574: pcf_middle
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_34
+    pin:
+      pcf8574: pcf_middle
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_35
+    pin:
+      pcf8574: pcf_middle
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_36
+    pin:
+      pcf8574: pcf_middle
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_37
+    pin:
+      pcf8574: pcf_middle
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_38
+    pin:
+      pcf8574: pcf_middle
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_39
+    pin:
+      pcf8574: pcf_middle
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_40
+    pin:
+      pcf8574: pcf_middle
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_41
+    pin:
+      pcf8574: pcf_right
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_42
+    pin:
+      pcf8574: pcf_right
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_43
+    pin:
+      pcf8574: pcf_right
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_44
+    pin:
+      pcf8574: pcf_right
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_45
+    pin:
+      pcf8574: pcf_right
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_46
+    pin:
+      pcf8574: pcf_right
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_47
+    pin:
+      pcf8574: pcf_right
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_48
+    pin:
+      pcf8574: pcf_right
+      number: 15
+      mode:
+        output: true
+      inverted: true

boneio-24x16_switches_v0_5-v0_6.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp24x16-switches
+  name: boneio-24-sw-06
   friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
-    name: boneio.24x16-switches_v0_5-v0_6
+    name: boneio.24x16-switches-v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,30 +24,29 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
         'devices_v0_5-v0_6/ina219.yaml',
         'devices_v0_5-v0_6/lm75b.yaml',
-        'devices_v0_5-v0_6/pcf.yaml',
+        'devices_v0_5-v0_6/pcf_with_mcp.yaml',
         'boards/24x16_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -576,3 +577,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-24x16_switches_v0_7.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp24x16-switches
+  name: boneio-24-sw-07
   friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.24x16-switches
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,29 +24,28 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
         'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf.yaml',
+        'devices_v0_7/pcf_with_mcp.yaml',
         'boards/24x16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -572,3 +573,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_lights_v0_5-v0_6.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-lights
+  name: boneio-32-l-06
   friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-lights_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -39,14 +42,12 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
   baud_rate: 0 #IMPORTANT FOR V0.5-V0.6 TO GET MODBUS WORKING
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -633,3 +634,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_lights_v0_7.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-lights
+  name: boneio-32-l-07
   friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-lights
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -38,13 +41,12 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
+  reboot_timeout: 0s
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -628,3 +630,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_switches_v0_5-v0_6.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-switches
+  name: boneio-32-sw-06
   friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-lights_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -632,3 +633,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-32x10_switches_v0_7.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-switches
+  name: boneio-32-sw-07
   friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-lights
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/32x10_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -628,3 +629,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_lights_v0_5-v0_6.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix
+  name: boneio-cm-l-06
   friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-cover-mix-lights_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -181,10 +182,6 @@ cover:
       - switch.turn_off: cover_close_08_out16
 
 light:
-  - platform: binary
-    name: 'Light 16'
-    output: out_16
-    id: light_16
   - platform: binary
     name: 'Light 17'
     output: out_17
@@ -249,6 +246,7 @@ light:
     name: 'Light 32'
     output: out_32
     id: light_32
+
 binary_sensor:
   - platform: gpio
     name: 'IN_01'
@@ -485,7 +483,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - light.toggle: light_15
+        - cover.open: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_16'
@@ -498,7 +499,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - light.toggle: light_16
+        - cover.close: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_17'
@@ -734,3 +738,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_lights_v0_7.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix
+  name: boneio-cm-l-07
   friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-cover-mix-lights
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -177,10 +178,6 @@ cover:
       - switch.turn_off: cover_close_08_out16
 
 light:
-  - platform: binary
-    name: 'Light 16'
-    output: out_16
-    id: light_16
   - platform: binary
     name: 'Light 17'
     output: out_17
@@ -245,6 +242,7 @@ light:
     name: 'Light 32'
     output: out_32
     id: light_32
+
 binary_sensor:
   - platform: gpio
     name: 'IN_01'
@@ -481,7 +479,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - light.toggle: light_15
+        - cover.open: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_16'
@@ -494,7 +495,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - light.toggle: light_16
+        - cover.close: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_17'
@@ -730,3 +734,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_switches_v0_5-v0_6.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix
+  name: boneio-cm-sw-06
   friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-cover-mix-switches_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -181,10 +182,6 @@ cover:
       - switch.turn_off: cover_close_08_out16
 
 switch:
-  - platform: output
-    name: 'Switch 16'
-    output: out_16
-    id: switch_16
   - platform: output
     name: 'Switch 17'
     output: out_17
@@ -485,7 +482,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - switch.toggle: switch_15
+        - cover.open: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_16'
@@ -498,7 +498,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - switch.toggle: switch_16
+        - cover.close: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_17'
@@ -734,3 +737,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_mix_switches_v0_7.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix
+  name: boneio-cm-sw-07
   friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-cover-mix-switches
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/8_covers_16_output.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -177,10 +178,6 @@ cover:
       - switch.turn_off: cover_close_08_out16
 
 switch:
-  - platform: output
-    name: 'Switch 16'
-    output: out_16
-    id: switch_16
   - platform: output
     name: 'Switch 17'
     output: out_17
@@ -245,6 +242,7 @@ switch:
     name: 'Switch 32'
     output: out_32
     id: switch_32
+
 binary_sensor:
   - platform: gpio
     name: 'IN_01'
@@ -481,7 +479,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - switch.toggle: switch_15
+        - cover.open: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_16'
@@ -494,7 +495,10 @@ binary_sensor:
       inverted: true
     on_press:
       then:
-        - switch.toggle: switch_16
+        - cover.close: cover_08
+    on_release:
+      then:
+        - cover.stop: cover_08
 
   - platform: gpio
     name: 'IN_17'
@@ -730,3 +734,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_v0_5-v0_6.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-covers
+  name: boneio-c-06
   friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-cover_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_5-v0_6/display.yaml',
         'devices_v0_5-v0_6/time.yaml',
         'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
         'devices_v0_5-v0_6/pcf.yaml',
         'boards/16_cover_pcf.yaml',
         # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -839,3 +840,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-cover_v0_7.yaml

@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-covers
+  name: boneio-c-07
   friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.
 
 esphome:
   name: '${name}'
   friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
   name_add_mac_suffix: true
   project:
     name: boneio.32x10-cover
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
 
 ethernet:
   id: eth
@@ -22,15 +24,16 @@ ethernet:
   power_pin: GPIO16
 
 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.0
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
   import_full_config: true
 
 packages:
   internals_packages:
     url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.0
+    ref: v1.0.17
     files: [
         'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
         'devices_v0_7/display.yaml',
         'devices_v0_7/i2c.yaml',
         'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
         'devices_v0_7/pcf.yaml',
         'boards/16_cover_pcf.yaml',
         # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
       ]
 
 logger:
 api:
 ota:
-  password: boneio
 
 web_server:
   port: 80
@@ -835,3 +836,25 @@ binary_sensor:
       mode:
         input: true
       inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-dimmer_2rgbw-v0_3.yaml

@@ -0,0 +1,220 @@
+substitutions:
+  name: boneio-dr-rgbw-03
+  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led
+    version: '0.3'
+
+esp32:
+  board: esp32dev
+
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.16
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+text_sensor:
+  - platform: version
+    name: 'boneio-dimmer- Version'
+    icon: mdi:cube-outline
+    entity_category: diagnostic
+  - platform: ethernet_info
+    ip_address:
+      entity_category: diagnostic
+      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_02'
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_03'
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_04'
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_05'
+    pin:
+      number: 36
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_06'
+    pin:
+      number: 39
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_07'
+    pin:
+      number: 34
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_08'
+    pin:
+      number: 35
+      mode:
+        input: true
+      inverted: true
+
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+light:
+  - platform: rgbw
+    name: 'RGBW L'
+    red: chl01
+    green: chl02
+    blue: chl03
+    white: chl04
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: rgbw
+    name: 'RGBW R'
+    red: chr01
+    green: chr02
+    blue: chr03
+    white: chr04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true

boneio-dimmer_4cct-v0_3.yaml

@@ -0,0 +1,230 @@
+substitutions:
+  name: boneio-dr-4cct-03
+  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led
+    version: '0.3'
+
+esp32:
+  board: esp32dev
+
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.16
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+text_sensor:
+  - platform: version
+    name: 'boneio-dimmer- Version'
+    icon: mdi:cube-outline
+    entity_category: diagnostic
+  - platform: ethernet_info
+    ip_address:
+      entity_category: diagnostic
+      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_02'
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_03'
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_04'
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_05'
+    pin:
+      number: 36
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_06'
+    pin:
+      number: 39
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_07'
+    pin:
+      number: 34
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_08'
+    pin:
+      number: 35
+      mode:
+        input: true
+      inverted: true
+
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+light:
+  - platform: cwww
+    name: 'CHL_01_02'
+    cold_white: chl01
+    warm_white: chl02
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+  - platform: cwww
+    name: 'CHL_03_04'
+    cold_white: chl03
+    warm_white: chl04
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+  - platform: cwww
+    name: 'CHR_01_02'
+    cold_white: chl01
+    warm_white: chl02
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+  - platform: cwww
+    name: 'CHR_03_04'
+    cold_white: chl03
+    warm_white: chl04
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true

boneio-dimmer_8ch-v0_3.yaml

@@ -0,0 +1,253 @@
+substitutions:
+  name: boneio-dr-8ch-03
+  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led
+    version: '0.3'
+
+esp32:
+  board: esp32dev
+
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.16
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+text_sensor:
+  - platform: version
+    name: 'boneio-dimmer- Version'
+    icon: mdi:cube-outline
+    entity_category: diagnostic
+  - platform: ethernet_info
+    ip_address:
+      entity_category: diagnostic
+      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_02'
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_03'
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_04'
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_05'
+    pin:
+      number: 36
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_06'
+    pin:
+      number: 39
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_07'
+    pin:
+      number: 34
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_08'
+    pin:
+      number: 35
+      mode:
+        input: true
+      inverted: true
+
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+light:
+  - platform: monochromatic
+    output: chl01
+    name: 'CHL 01'
+    id: chl_01
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chl02
+    name: 'CHL 02'
+    id: chl_02
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chl03
+    name: 'CHL 03'
+    id: chl_03
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chl04
+    name: 'CHL 04'
+    id: chl_04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+  - platform: monochromatic
+    output: chr01
+    name: 'CHR 01'
+    id: chr_01
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chr02
+    name: 'CHR 02'
+    id: chr_02
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chr03
+    name: 'CHR 03'
+    id: chr_03
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chr04
+    name: 'CHR 04'
+    id: chr_04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true

boneio-mosfet48_lights_v0_7.yaml

@@ -0,0 +1,718 @@
+substitutions:
+  name: boneio-48-l-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Lights'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_lights_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.18
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7/ina219.yaml',
+        'devices_v0_7/lm75b.yaml',
+        'devices_v0_7/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+  reboot_timeout: 0s
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+light:
+  - platform: binary
+    name: 'Light 01'
+    output: out_01
+    id: light_01
+  - platform: binary
+    name: 'Light 02'
+    output: out_02
+    id: light_02
+  - platform: binary
+    name: 'Light 03'
+    output: out_03
+    id: light_03
+  - platform: binary
+    name: 'Light 04'
+    output: out_04
+    id: light_04
+  - platform: binary
+    name: 'Light 05'
+    output: out_05
+    id: light_05
+  - platform: binary
+    name: 'Light 06'
+    output: out_06
+    id: light_06
+  - platform: binary
+    name: 'Light 07'
+    output: out_07
+    id: light_07
+  - platform: binary
+    name: 'Light 08'
+    output: out_08
+    id: light_08
+  - platform: binary
+    name: 'Light 09'
+    output: out_09
+    id: light_09
+  - platform: binary
+    name: 'Light 10'
+    output: out_10
+    id: light_10
+  - platform: binary
+    name: 'Light 11'
+    output: out_11
+    id: light_11
+  - platform: binary
+    name: 'Light 12'
+    output: out_12
+    id: light_12
+  - platform: binary
+    name: 'Light 13'
+    output: out_13
+    id: light_13
+  - platform: binary
+    name: 'Light 14'
+    output: out_14
+    id: light_14
+  - platform: binary
+    name: 'Light 15'
+    output: out_15
+    id: light_15
+  - platform: binary
+    name: 'Light 16'
+    output: out_16
+    id: light_16
+  - platform: binary
+    name: 'Light 17'
+    output: out_17
+    id: light_17
+  - platform: binary
+    name: 'Light 18'
+    output: out_18
+    id: light_18
+  - platform: binary
+    name: 'Light 19'
+    output: out_19
+    id: light_19
+  - platform: binary
+    name: 'Light 20'
+    output: out_20
+    id: light_20
+  - platform: binary
+    name: 'Light 21'
+    output: out_21
+    id: light_21
+  - platform: binary
+    name: 'Light 22'
+    output: out_22
+    id: light_22
+  - platform: binary
+    name: 'Light 23'
+    output: out_23
+    id: light_23
+  - platform: binary
+    name: 'Light 24'
+    output: out_24
+    id: light_24
+  - platform: binary
+    name: 'Light 25'
+    output: out_25
+    id: light_25
+  - platform: binary
+    name: 'Light 26'
+    output: out_26
+    id: light_26
+  - platform: binary
+    name: 'Light 27'
+    output: out_27
+    id: light_27
+  - platform: binary
+    name: 'Light 28'
+    output: out_28
+    id: light_28
+  - platform: binary
+    name: 'Light 29'
+    output: out_29
+    id: light_29
+  - platform: binary
+    name: 'Light 30'
+    output: out_30
+    id: light_30
+  - platform: binary
+    name: 'Light 31'
+    output: out_31
+    id: light_31
+  - platform: binary
+    name: 'Light 32'
+    output: out_32
+    id: light_32
+  - platform: binary
+    name: 'Light 33'
+    output: out_33
+    id: light_33
+  - platform: binary
+    name: 'Light 34'
+    output: out_34
+    id: light_34
+  - platform: binary
+    name: 'Light 35'
+    output: out_35
+    id: light_35
+  - platform: binary
+    name: 'Light 36'
+    output: out_36
+    id: light_36
+  - platform: binary
+    name: 'Light 37'
+    output: out_37
+    id: light_37
+  - platform: binary
+    name: 'Light 38'
+    output: out_38
+    id: light_38
+  - platform: binary
+    name: 'Light 39'
+    output: out_39
+    id: light_39
+  - platform: binary
+    name: 'Light 40'
+    output: out_40
+    id: light_40
+  - platform: binary
+    name: 'Light 41'
+    output: out_41
+    id: light_41
+  - platform: binary
+    name: 'Light 42'
+    output: out_42
+    id: light_42
+  - platform: binary
+    name: 'Light 43'
+    output: out_43
+    id: light_43
+  - platform: binary
+    name: 'Light 44'
+    output: out_44
+    id: light_44
+  - platform: binary
+    name: 'Light 45'
+    output: out_45
+    id: light_45
+  - platform: binary
+    name: 'Light 46'
+    output: out_46
+    id: light_46
+  - platform: binary
+    name: 'Light 47'
+    output: out_47
+    id: light_47
+  - platform: binary
+    name: 'Light 48'
+    output: out_48
+    id: light_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

boneio-mosfet48_switches_v0_7.yaml

@@ -0,0 +1,717 @@
+substitutions:
+  name: boneio-48-sw-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Switches'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_switches_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.18
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7/ina219.yaml',
+        'devices_v0_7/lm75b.yaml',
+        'devices_v0_7/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+switch:
+  - platform: output
+    name: 'Switch 01'
+    output: out_01
+    id: switch_01
+  - platform: output
+    name: 'Switch 02'
+    output: out_02
+    id: switch_02
+  - platform: output
+    name: 'Switch 03'
+    output: out_03
+    id: switch_03
+  - platform: output
+    name: 'Switch 04'
+    output: out_04
+    id: switch_04
+  - platform: output
+    name: 'Switch 05'
+    output: out_05
+    id: switch_05
+  - platform: output
+    name: 'Switch 06'
+    output: out_06
+    id: switch_06
+  - platform: output
+    name: 'Switch 07'
+    output: out_07
+    id: switch_07
+  - platform: output
+    name: 'Switch 08'
+    output: out_08
+    id: switch_08
+  - platform: output
+    name: 'Switch 09'
+    output: out_09
+    id: switch_09
+  - platform: output
+    name: 'Switch 10'
+    output: out_10
+    id: switch_10
+  - platform: output
+    name: 'Switch 11'
+    output: out_11
+    id: switch_11
+  - platform: output
+    name: 'Switch 12'
+    output: out_12
+    id: switch_12
+  - platform: output
+    name: 'Switch 13'
+    output: out_13
+    id: switch_13
+  - platform: output
+    name: 'Switch 14'
+    output: out_14
+    id: switch_14
+  - platform: output
+    name: 'Switch 15'
+    output: out_15
+    id: switch_15
+  - platform: output
+    name: 'Switch 16'
+    output: out_16
+    id: switch_16
+  - platform: output
+    name: 'Switch 17'
+    output: out_17
+    id: switch_17
+  - platform: output
+    name: 'Switch 18'
+    output: out_18
+    id: switch_18
+  - platform: output
+    name: 'Switch 19'
+    output: out_19
+    id: switch_19
+  - platform: output
+    name: 'Switch 20'
+    output: out_20
+    id: switch_20
+  - platform: output
+    name: 'Switch 21'
+    output: out_21
+    id: switch_21
+  - platform: output
+    name: 'Switch 22'
+    output: out_22
+    id: switch_22
+  - platform: output
+    name: 'Switch 23'
+    output: out_23
+    id: switch_23
+  - platform: output
+    name: 'Switch 24'
+    output: out_24
+    id: switch_24
+  - platform: output
+    name: 'Switch 25'
+    output: out_25
+    id: switch_25
+  - platform: output
+    name: 'Switch 26'
+    output: out_26
+    id: switch_26
+  - platform: output
+    name: 'Switch 27'
+    output: out_27
+    id: switch_27
+  - platform: output
+    name: 'Switch 28'
+    output: out_28
+    id: switch_28
+  - platform: output
+    name: 'Switch 29'
+    output: out_29
+    id: switch_29
+  - platform: output
+    name: 'Switch 30'
+    output: out_30
+    id: switch_30
+  - platform: output
+    name: 'Switch 31'
+    output: out_31
+    id: switch_31
+  - platform: output
+    name: 'Switch 32'
+    output: out_32
+    id: switch_32
+  - platform: output
+    name: 'Switch 33'
+    output: out_33
+    id: switch_33
+  - platform: output
+    name: 'Switch 34'
+    output: out_34
+    id: switch_34
+  - platform: output
+    name: 'Switch 35'
+    output: out_35
+    id: switch_35
+  - platform: output
+    name: 'Switch 36'
+    output: out_36
+    id: switch_36
+  - platform: output
+    name: 'Switch 37'
+    output: out_37
+    id: switch_37
+  - platform: output
+    name: 'Switch 38'
+    output: out_38
+    id: switch_38
+  - platform: output
+    name: 'Switch 39'
+    output: out_39
+    id: switch_39
+  - platform: output
+    name: 'Switch 40'
+    output: out_40
+    id: switch_40
+  - platform: output
+    name: 'Switch 41'
+    output: out_41
+    id: switch_41
+  - platform: output
+    name: 'Switch 42'
+    output: out_42
+    id: switch_42
+  - platform: output
+    name: 'Switch 43'
+    output: out_43
+    id: switch_43
+  - platform: output
+    name: 'Switch 44'
+    output: out_44
+    id: switch_44
+  - platform: output
+    name: 'Switch 45'
+    output: out_45
+    id: switch_45
+  - platform: output
+    name: 'Switch 46'
+    output: out_46
+    id: switch_46
+  - platform: output
+    name: 'Switch 47'
+    output: out_47
+    id: switch_47
+  - platform: output
+    name: 'Switch 48'
+    output: out_48
+    id: switch_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s

create_firmware.py

@@ -0,0 +1,74 @@
+#!/usr/bin/python
+import subprocess
+import glob
+import os
+import re
+import json
+import shutil
+from pathlib import Path
+
+home = str(Path.home())
+
+
+cwd = os.getcwd()
+
+
+pattern = r"name:\s*(\S+)"
+json_destination = "../website/public/esp"
+firmware_destination = "../website/public/esp/firmware"
+
+
+def json_pattern(firmware_name):
+    return {
+        "name": "ESPHome",
+        "version": "2024.5.0",
+        "home_assistant_domain": "esphome",
+        "funding_url": "https://esphome.io/guides/supporters.html",
+        "new_install_prompt_erase": False,
+        "builds": [
+            {
+                "chipFamily": "ESP32",
+                "parts": [
+                    {
+                        "path": f"/esp/firmware/{firmware_name}.bin",
+                        "offset": 0,
+                    }
+                ],
+            }
+        ],
+    }
+
+
+def get_boneio_name(file):
+    with open(file) as f:
+        next(f)
+        name = next(f)
+        match = re.search(pattern, name)
+        if match:
+            extracted_text = match.group(1)
+            return extracted_text
+        return None
+
+
+for file in glob.glob("*.yaml"):
+    filename = get_boneio_name(file)
+    if not filename:
+        print("No file found.")
+        break
+    firmware_path = f"{cwd}/.esphome/build/{filename}/.pioenvs/{filename}/firmware-factory.bin"
+    print("CWD", cwd)
+    subprocess.run(
+        f'docker run --rm -p 6052:6052 -v "{cwd}":/config -it ghcr.io/esphome/esphome compile {file}',
+        shell=True,
+    )
+    shutil.copyfile(firmware_path, f"{firmware_destination}/{filename}.bin")
+
+    with open(
+        f"{json_destination}/{filename}.json", "w", encoding="utf-8"
+    ) as f:
+        json.dump(
+            json_pattern(firmware_name=filename),
+            f,
+            ensure_ascii=False,
+            indent=4,
+        )

devices/dimmer_i2c.yaml

@@ -0,0 +1,5 @@
+i2c:
+  sda: GPIO4
+  scl: GPIO5
+  scan: True
+  frequency: 400kHz

devices/dimmer_ina219.yaml

@@ -0,0 +1,37 @@
+sensor:
+  - platform: ina219
+    address: 0x40
+    shunt_resistance: 0.005 ohm
+    bus_voltage:
+      name: 'VDDL Supply'
+      entity_category: diagnostic
+    power:
+      name: 'VDDL Power'
+      entity_category: diagnostic
+    current:
+      name: 'VDDL Current'
+      entity_category: diagnostic
+    shunt_voltage:
+      name: 'VDDL Shunt Voltage'
+      entity_category: diagnostic
+    max_voltage: 32V
+    max_current: 10A
+    update_interval: 5s
+  - platform: ina219
+    address: 0x41
+    shunt_resistance: 0.005 ohm
+    bus_voltage:
+      name: 'VDDR Supply'
+      entity_category: diagnostic
+    power:
+      name: 'VDDR Power'
+      entity_category: diagnostic
+    current:
+      name: 'VDDR Current'
+      entity_category: diagnostic
+    shunt_voltage:
+      name: 'VDDR Shunt Voltage'
+      entity_category: diagnostic
+    max_voltage: 32V
+    max_current: 10A
+    update_interval: 5s

devices/dimmer_outputs.yaml

@@ -0,0 +1,42 @@
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04

devices/serial_no.yaml

@@ -0,0 +1,9 @@
+text_sensor:
+  - platform: template
+    name: 'Serial No.'
+    lambda: |-
+      std::string mac = get_mac_address();
+      return to_string("${serial_prefix}") + mac.erase(0, mac.length()/2);
+    icon: mdi:expansion-card-variant
+    entity_category: diagnostic
+    update_interval: 60min

devices_v0_5-v0_6/pcf_with_mcp.yaml

@@ -0,0 +1,20 @@
+pcf8574:
+  - id: 'pcf_inputs_1to14'
+    i2c_id: bus_a
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_inputs_15to28'
+    i2c_id: bus_a
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: bus_a
+    address: 0x22
+    pcf8575: false
+mcp23017:
+  - id: 'mcp_left'
+    address: 0x21
+    i2c_id: bus_b
+  - id: 'mcp_right'
+    address: 0x20
+    i2c_id: bus_b

devices_v0_5-v0_6/uart.yaml

@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin3_1
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1

devices_v0_7/display.yaml

@@ -101,8 +101,6 @@ display:
         lambda: |-
           it.rectangle(0, 0, 126, 15);
           it.printf(64,11, id(size_10), TextAlign::BASELINE_CENTER, "bone IO");
-          it.printf(4, 25, id(dejaVuSmall), TextAlign::BASELINE_LEFT ,"Current:");
-          it.printf(124, 25, id(dejaVuSmall), TextAlign::BASELINE_RIGHT ,"%.3fA", id(ina_current).state);
           it.printf(4, 37, id(size_10), TextAlign::BASELINE_LEFT ,"IP addr:");
           it.printf(124, 37, id(size_10), TextAlign::BASELINE_RIGHT ,"%s", id(ip_address).state.c_str());
           it.printf(4, 49, id(size_10), TextAlign::BASELINE_LEFT ,"Uptime:");

devices_v0_7/one_wire.yaml

@@ -1,6 +1,5 @@
 dallas:
-- pin: GPIO32
+  - pin: GPIO32
-
 # sensor:
 #   - platform: dallas
 #     address: 0x283c01d607d4df28

devices_v0_7/pcf_mosfet.yaml

@@ -0,0 +1,25 @@
+pcf8574:
+  - id: 'pcf_inputs_1to14'
+    i2c_id: i2c_bus
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_inputs_15to28'
+    i2c_id: i2c_bus
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: i2c_bus
+    address: 0x22
+    pcf8575: false
+  - id: 'pcf_left'
+    address: 0x23
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_middle'
+    address: 0x24
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_right'
+    address: 0x25
+    pcf8575: true
+    i2c_id: i2c_bus

devices_v0_7/uart.yaml

@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin14_15
-  rx_pin: GPIO14
-  tx_pin: GPIO15
-  baud_rate: 9600
-  stop_bits: 1