substitutions:
  name: boneio-dev02
  friendly_name: 'BoneIO Dimmer dev0.2'
  serial_prefix: 'dim' #Don't change it.

esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
  name_add_mac_suffix: false
  project:
    name: boneio.dimmer-led
    version: 'dev0.2'

esp32:
  board: esp32-s3-devkitc-1


ethernet:
  id: eth
  type: W5500
  clk_pin: GPIO12
  mosi_pin: GPIO39
  miso_pin: GPIO38
  cs_pin: GPIO13
  interrupt_pin: GPIO2
  reset_pin: GPIO1
  # Enable fallback hotspot (captive portal) in case wifi connection fails

external_components:
  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
    components: [lm75]

i2c:
  sda: GPIO10
  scl: GPIO11
  scan: True
  frequency: 400kHz

uart:
  id: boneio_uart
  rx_pin: GPIO14
  tx_pin: GPIO21
  baud_rate: 9600
  stop_bits: 1

output:
  - platform: ledc
    pin: GPIO18
    frequency: 1000Hz
    inverted: false
    id: chl01
  - platform: ledc
    pin: GPIO17
    frequency: 1000Hz
    inverted: false
    id: chl02
  - platform: ledc
    pin: GPIO16
    frequency: 1000Hz
    inverted: false
    id: chl03
  - platform: ledc
    pin: GPIO15
    frequency: 1000Hz
    inverted: false
    id: chl04

  - platform: ledc
    pin: GPIO7
    frequency: 1000Hz
    inverted: false
    id: chr01
  - platform: ledc
    pin: GPIO6
    frequency: 1000Hz
    inverted: false
    id: chr02
  - platform: ledc
    pin: GPIO5
    frequency: 1000Hz
    inverted: false
    id: chr03
  - platform: ledc
    pin: GPIO4
    frequency: 1000Hz
    inverted: false
    id: chr04

  ##CAN gpio1 - tx, gpio2 rx

modbus:
  send_wait_time: 200ms
  uart_id: boneio_uart
  id: boneio_modbus

packages:
  boneio_packages:
    url: "https://github.com/boneIO-eu/esphome_packages"
    refresh: 1min
    files:
      - path: "sdm630.yaml"
        vars:
          device_name: "MySDM"

# dashboard_import:
#   package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
#   import_full_config: true

pcf8574:
  - id: 'pcf_inputs'
    address: 0x38

logger:
  hardware_uart: UART0
api:
  reboot_timeout: 0s
ota:
  - platform: esphome

web_server:
  port: 80
  local: true


light:
  - platform: monochromatic
    output: chl01
    name: 'CHL 01'
    id: chl_01
    default_transition_length: 2s
    gamma_correct: 0
  - platform: monochromatic
    output: chl02
    name: 'CHL 02'
    id: chl_02
    default_transition_length: 2s
    gamma_correct: 0
  - platform: monochromatic
    output: chl03
    name: 'CHL 03'
    id: chl_03
    default_transition_length: 2s
    gamma_correct: 0
  - platform: monochromatic
    output: chl04
    name: 'CHL 04'
    id: chl_04
    default_transition_length: 2s
    gamma_correct: 0

  - platform: monochromatic
    output: chr01
    name: 'CHR 01'
    id: chr_01
    default_transition_length: 2s
    gamma_correct: 0
  - platform: monochromatic
    output: chr02
    name: 'CHR 02'
    id: chr_02
    default_transition_length: 2s
    gamma_correct: 0
  - platform: monochromatic
    output: chr03
    name: 'CHR 03'
    id: chr_03
    default_transition_length: 2s
    gamma_correct: 0
  - platform: monochromatic
    output: chr04
    name: 'CHR 04'
    id: chr_04
    default_transition_length: 2s
    gamma_correct: 0

debug:
  update_interval: 15s

sensor:
  - platform: debug
    free:
      name: "Heap Free"
    block:
      name: "Heap Max Block"
    loop_time:
      name: "Loop Time"
  - platform: lm75
    id: boneIO_temp
    name: 'Temperature'
    update_interval: 30s
    entity_category: diagnostic
    on_value_range:
      - above: 70.0
        then:
          - switch.turn_on: buzzer
      - below: 70.0
        then:
          - switch.turn_off: buzzer

switch:
  - platform: gpio
    id: buzzer
    name: 'Buzzer'
    pin:
      number: GPIO9
      mode:
        output: true
      inverted: false

binary_sensor:
  - platform: gpio
    name: 'IN_01'
    id: in_01
    pin:
      pcf8574: pcf_inputs
      number: 0
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_02'
    id: in_02
    pin:
      pcf8574: pcf_inputs
      number: 1
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_03'
    id: in_03
    pin:
      pcf8574: pcf_inputs
      number: 2
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_04'
    id: in_04
    pin:
      pcf8574: pcf_inputs
      number: 3
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_05'
    id: in_05
    pin:
      pcf8574: pcf_inputs
      number: 4
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_06'
    id: in_06
    pin:
      pcf8574: pcf_inputs
      number: 5
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_07'
    id: in_07
    pin:
      pcf8574: pcf_inputs
      number: 6
      mode:
        input: true
      inverted: true

  - platform: gpio
    name: 'IN_08'
    id: in_08
    pin:
      pcf8574: pcf_inputs
      number: 7
      mode:
        input: true
      inverted: true