Update README.md

This reverts commit 9713cb6fa4.

.github/CODE_OF_CONDUCT.md

@@ -0,0 +1,128 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, religion, or sexual identity
+and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the
+  overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series
+of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or
+permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior,  harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within
+the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at
+https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at
+https://www.contributor-covenant.org/translations.

.github/CONTRIBUTING.md

@@ -0,0 +1 @@
+Please, feel free to contribute. Especially if you own model differnt from G14 2022 and can offer extra features or support.

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,38 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Desktop (please complete the following information):**
+ - OS: [e.g. iOS]
+ - Browser [e.g. chrome, safari]
+ - Version [e.g. 22]
+
+**Smartphone (please complete the following information):**
+ - Device: [e.g. iPhone6]
+ - OS: [e.g. iOS8.1]
+ - Browser [e.g. stock browser, safari]
+ - Version [e.g. 22]
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/custom.md

@@ -0,0 +1,10 @@
+---
+name: Custom issue template
+about: Describe this issue template's purpose here.
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/SECURITY.md

@@ -0,0 +1,16 @@
+# Security Policy
+
+## Supported Versions
+
+| Version | Supported          |
+| ------- | ------------------ |
+| 0.25+   | :white_check_mark: |
+| < 0.24  | :x:                |
+
+## Reporting a Vulnerability
+
+Use this section to tell people how to report a vulnerability.
+
+Tell them where to go, how often they can expect to get an update on a
+reported vulnerability, what to expect if the vulnerability is accepted or
+declined, etc.

LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2023 Serge
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

Properties/launchSettings.json

@@ -1,8 +0,0 @@
-{
-  "profiles": {
-    "GHelper": {
-      "commandName": "Project",
-      "workingDirectory": "C:\\Users\\serge\\source\\GHelper"
-    }
-  }
-}

README.md

@@ -1,79 +0,0 @@
-# G-Helper / GHelper 
-
-## For Asus ROG Zephyrus G14, G15, Flow X13, Flow X16, and other models
-
-A small utility that allows you do almost everyting you could do with Armory Crate but without extra bloat and unnecessary services.
-
-### [Download latest release](https://github.com/seerge/g-helper/releases)
-
-![Screenshot](https://raw.githubusercontent.com/seerge/g-helper/main/screenshot.png)
-
-## NEW (and experimental) features
-
-1. Set Power limits (PPT) for Total (APU + dGPU) and CPU. 
-2. Anime matrix control thanks to [Starlight](https://github.com/vddCore/Starlight) + some tweaks from my side
-
-## Main features
-
-1. Switch between built-in system **Performance modes** Silent / Balanced / Turbo and apply default fan curves
-2. Switch between Eco / Standard or Ultimate **GPU modes**
-3. Change laptop screen refresh rate - 60hz or your maximum (120hz, 144hz, etc depending on the model) with display overdrive (OD)
-4. View default fan profiles for every mode and **auto apply** custom ones 
-5. Control keyboard backlit animation and colors
-6. Set battery charge limit to preserve battery health
-7. Monitor CPU temperature, fan speeds and battery discharge rate
-8. **Automatically switch to Eco(iGPU)/60hz on battery** and back to Standard(GPU)/120hz modes when plugged
-9. Support for FN+F5 to cycle through performance modes (with OSD notification) and FN+F4 to cycle through keeyboard animation modes
-10. Basic keybindings for M3 and M4 keys
-11. Turn cpu turbo boost on/off with one checkbox to keep temps cooler
-
-Designed and developed for Asus Zephyrus G14 2022 (with AMD Radeon iGPU and dGPU). But could and should potentially work for G14 of 2021 and 2020, G15, X FLOW, and other ROG models for relevant and supported features.
-
-To keep autoswitching and hotkeys work app needs to stay in running in tray. It doesn't consume any resources. 
-
-## Performance Profile switching 
-
-Profiles are **same** as in Armory Crate (as they are stored in bios), including default fan curves
-
-1. Silent (minimal or no fans, 70W PPT total, up to 45W PPT to CPU)
-2. Balanced (balanced fans, 100W PPT total, up to 45W PPT to CPU)
-3. Turbo (intense fans, 125W PPT total, up to 80W PPT to CPU) 
-
-PPTs are shown for G14 2022, for other models PPTs will be different as they are set in bios.
-
-## GPU Modes
-
-1. Eco mode : only low power integrated GPU enabled, iGPU drives built in display
-2. Standard mode (Windows Hybrid) : iGPU and dGPU enabled, iGPU drives built in display
-3. Ultimate mode: iGPU and dGPU enabled, but dGPU drives built in display (supported only on G14 2022 model)
-
-## How to install
-
-1. Download latest release from [**Releases Page**](https://github.com/seerge/g-helper/releases)
-2. Unzip to a folder of your choice
-3. Run **GHelper.exe**
-
-App requires [.NET7](https://dotnet.microsoft.com/en-us/download) to be installed. Most probably you already have it. Otherwise you can [download it](https://dotnet.microsoft.com/en-us/download).
-
-I recommend to keep "Asus Optimization Service" running, as it keeps basic laptop hotkeys such as screen or keyboard brightness adjustment working. If you have (or had) MyASUS app installed, that service is most probably still up an running even after MyASUS uninstall. It's part of [Asus System Controll Interface](https://www.asus.com/support/FAQ/1047338/). You can install it, and later disable / remove unnecesarily services by running [this bat file](https://raw.githubusercontent.com/seerge/g-helper/main/stop-asus-sv.bat) as admin.
-
-Note: Uses low level ASUS ACPI commands and doens't require Armory Crate to be installed at all!  Doesn't need administrator privileges to run!
-
-I don`t have Microsoft certificate to sign app yet, so if you get a warning from Windows Defender on launch (Windows Protected your PC), click More Info -> Run anyway. Alternatively you can compile and run project by yourself using Visual Studio :)
-
-Settings file is stored at %AppData%\GHelper
-
-P.S.: It's not recommended to use app in combination with Armory Crate, cause they adjust same settings.
-
-------------------
-
-Debloating helps to save your battery and keep laptop a bit cooler
-
-![Helps to save your battery](https://raw.githubusercontent.com/seerge/g-helper/main/screenshots/screen-5w.png)
-
----------
-
-**Disclaimers**
-"ROG", "TUF", and "Armoury Crate" are trademarked by and belong to AsusTek Computer, Inc. I make no claims to these or any assets belonging to AsusTek Computer and use them purely for informational purposes only.
-
-THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. MISUSE OF THIS SOFTWARE COULD CAUSE SYSTEM INSTABILITY OR MALFUNCTION.

app/ASUSWmi.cs

@@ -1,9 +1,6 @@
-using GHelper;
-using System.Diagnostics;
-using System.Management;
+using System.Management;
 using System.Runtime.InteropServices;
 
-
 public class ASUSWmi
 {
 
@@ -27,12 +24,16 @@ public class ASUSWmi
     public const uint DevsCPUFanCurve = 0x00110024;
     public const uint DevsGPUFanCurve = 0x00110025;
 
-    public const int PPT_TotalA0 = 0x001200A0;
-    public const int PPT_TotalA1 = 0x001200A1;
+    public const int PPT_TotalA0 = 0x001200A0;  // Total PPT on 2022 and CPU PPT on 2021
+    public const int PPT_EDCA1 = 0x001200A1;  // CPU EDC
+    public const int PPT_TDCA2 = 0x001200A2;  // CPU TDC
+    public const int PPT_APUA3 = 0x001200A3;  // APU PPT ON 2021, doesn't work on 2022
 
-    public const int PPT_CPUB0 = 0x001200B0;
-    public const int PPT_CPUB1 = 0x001200B1;
-    public const int PPT_CPUA2 = 0x001200A2;
+    public const int PPT_CPUB0 = 0x001200B0;  // CPU PPT on 2022
+    public const int PPT_CPUB1 = 0x001200B1;  // APU PPT on 2022
+
+    public const int PPT_APUC1 = 0x001200C1;
+    public const int PPT_APUC2 = 0x001200C2;
 
     public const int PerformanceBalanced = 0;
     public const int PerformanceTurbo = 1;
@@ -44,11 +45,11 @@ public class ASUSWmi
 
 
     public const int MaxTotal = 150;
-    public const int MinTotal = 15;
+    public const int MinTotal = 5;
     public const int DefaultTotal = 125;
 
     public const int MaxCPU = 90;
-    public const int MinCPU = 15;
+    public const int MinCPU = 5;
     public const int DefaultCPU = 80;
 
 
@@ -183,7 +184,7 @@ public class ASUSWmi
         if (curve.Length != 16) return;
         if (curve.All(singleByte => singleByte == 0)) return;
 
-        Logger.WriteLine("Fans" + ((device == 1)?"GPU":"CPU") + " " + BitConverter.ToString(curve));
+        Logger.WriteLine("Fans" + ((device == 1) ? "GPU" : "CPU") + " " + BitConverter.ToString(curve));
 
         if (device == 1)
             DeviceSet(DevsGPUFanCurve, curve);

app/App.config

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8" ?>
 <configuration>
 	<System.Windows.Forms.ApplicationConfigurationSection>
-		<add key="DpiAwareness" value="PerMonitorV2" />
+		<add key="DpiAwareness" value="System" />
 	</System.Windows.Forms.ApplicationConfigurationSection>
 	<appSettings>
 		<add key="EnableWindowsFormsHighDpiAutoResizing" value="true" />

app/Aura.cs

@@ -43,7 +43,7 @@ public class Aura
     {
 
         HidDevice[] HidDeviceList;
-        int[] deviceIds = { 0x1854, 0x1869, 0x1866, 0x19b6 };
+        int[] deviceIds = { 0x1854, 0x1869, 0x1866, 0x19b6, 0x1822, 0x1837, 0x1854, 0x184a, 0x183d, 0x8502, 0x1807, 0x17e0 };
 
         HidDeviceList = HidDevices.Enumerate(0x0b05, deviceIds).ToArray();
 
@@ -63,18 +63,14 @@ public class Aura
 
         foreach (HidDevice device in HidDeviceList)
         {
-            if (device.IsConnected)
+            if (device.IsConnected && device.Description.Contains("HID"))
             {
-                if (device.Description.IndexOf("HID") >= 0)
-                {
-                    device.OpenDevice();
-                    byte[] msg = AuraMessage(Mode, Color1, Color2, Speed);
-                    device.Write(msg);
-                    device.Write(MESSAGE_SET);
-                    device.Write(MESSAGE_APPLY);
-                    device.CloseDevice();
-                }
-
+                device.OpenDevice();
+                byte[] msg = AuraMessage(Mode, Color1, Color2, Speed);
+                device.Write(msg);
+                device.Write(MESSAGE_SET);
+                device.Write(MESSAGE_APPLY);
+                device.CloseDevice();
             }
         }
 

app/Fans.cs

@@ -168,8 +168,17 @@ namespace GHelper
         public void InitPower(bool changed = false)
         {
 
-            panelPower.Visible = (Program.wmi.DeviceGet(ASUSWmi.PPT_TotalA0) >= 0);
-            panelCPU.Visible = (Program.wmi.DeviceGet(ASUSWmi.PPT_CPUB0) >= 0);
+            bool cpuBmode = (Program.wmi.DeviceGet(ASUSWmi.PPT_CPUB0) >= 0); // 2022 model +
+            bool cpuAmode = (Program.wmi.DeviceGet(ASUSWmi.PPT_TotalA0) >= 0); // 2021 model +
+
+            panelPower.Visible = cpuAmode;
+            panelCPU.Visible = cpuBmode;
+
+            // Yes, that's stupid, but Total slider on 2021 model actually adjusts CPU PPT
+            if (!cpuBmode)
+            {
+                label1.Text = "CPU SPPT";
+            }
 
             int limit_total;
             int limit_cpu;

app/GHelper.csproj

@@ -16,7 +16,7 @@
     <PlatformTarget>x64</PlatformTarget>
     <ProduceReferenceAssembly>False</ProduceReferenceAssembly>
     <AllowUnsafeBlocks>True</AllowUnsafeBlocks>
-    <AssemblyVersion>0.27</AssemblyVersion>
+    <AssemblyVersion>0.29</AssemblyVersion>
   </PropertyGroup>
 
   <ItemGroup>
@@ -32,7 +32,7 @@
 
   <ItemGroup>
     <Content Include="favicon.ico">
-      <CopyToOutputDirectory>Always</CopyToOutputDirectory>
+      <CopyToOutputDirectory>Never</CopyToOutputDirectory>
     </Content>
   </ItemGroup>
 

app/Logger.cs

@@ -0,0 +1,39 @@
+using System.Diagnostics;
+
+public static class Logger
+{
+    static string appPath = Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData) + "\\GHelper";
+    static string logFile = appPath + "\\log.txt";
+
+    public static void WriteLine(string logMessage)
+    {
+        Debug.WriteLine(logMessage);
+        if (!Directory.Exists(appPath)) Directory.CreateDirectory(appPath);
+
+        try
+        {
+            using (StreamWriter w = File.AppendText(logFile))
+            {
+                w.WriteLine($"{DateTime.Now}: {logMessage}");
+                w.Close();
+            }
+        }
+        catch { }
+
+        if (new Random().Next(100) == 1) Cleanup();
+
+
+    }
+
+    public static void Cleanup()
+    {
+        try
+        {
+            var file = File.ReadAllLines(logFile);
+            int skip = Math.Max(0, file.Count() - 500);
+            File.WriteAllLines(logFile, file.Skip(skip).ToArray());
+        }
+        catch { }
+    }
+
+}

app/NativeMethods.cs

@@ -1,10 +1,7 @@
-using System.Collections;
-using System;
-using System.ComponentModel;
+using System.ComponentModel;
 using System.Diagnostics;
 using System.Runtime.InteropServices;
 using static Tools.ScreenInterrogatory;
-using System.Windows.Forms;
 
 namespace Tools
 {
@@ -458,6 +455,15 @@ public class NativeMethods
     static readonly Guid GUID_CPU = new Guid("54533251-82be-4824-96c1-47b60b740d00");
     static readonly Guid GUID_BOOST = new Guid("be337238-0d82-4146-a960-4f3749d470c7");
 
+    [DllImportAttribute("powrprof.dll", EntryPoint = "PowerGetActualOverlayScheme")]
+    public static extern uint PowerGetActualOverlayScheme(out Guid ActualOverlayGuid);
+
+    [DllImportAttribute("powrprof.dll", EntryPoint = "PowerGetEffectiveOverlayScheme")]
+    public static extern uint PowerGetEffectiveOverlayScheme(out Guid EffectiveOverlayGuid);
+
+    [DllImportAttribute("powrprof.dll", EntryPoint = "PowerSetActiveOverlayScheme")]
+    public static extern uint PowerSetActiveOverlayScheme(Guid OverlaySchemeGuid);
+
     [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi)]
     public struct DEVMODE
     {
@@ -666,4 +672,20 @@ public class NativeMethods
         */
 
     }
+
+    public static void SetPowerScheme(int mode)
+    {
+        switch (mode)
+        {
+            case 0: // balanced
+                PowerSetActiveOverlayScheme(new Guid("00000000-0000-0000-0000-000000000000"));
+                break;
+            case 1: // turbo
+                PowerSetActiveOverlayScheme(new Guid("ded574b5-45a0-4f42-8737-46345c09c238"));
+                break;
+            case 2: //silent
+                PowerSetActiveOverlayScheme(new Guid("961cc777-2547-4f9d-8174-7d86181b8a7a"));
+                break;
+        }
+    }
 }

app/Program.cs

@@ -2,43 +2,7 @@ using Microsoft.Win32;
 using System.Diagnostics;
 using System.Management;
 using System.Reflection;
-using System.Runtime.InteropServices;
 using System.Text.Json;
-public static class Logger
-{
-    static string appPath = Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData) + "\\GHelper";
-    static string logFile = appPath + "\\log.txt";
-
-    public static void WriteLine(string logMessage)
-    {
-        Debug.WriteLine(logMessage);
-        if (!Directory.Exists(appPath)) Directory.CreateDirectory(appPath);
-
-        try
-        {
-            using (StreamWriter w = File.AppendText(logFile))
-            {
-                w.WriteLine($"{DateTime.Now}: {logMessage}");
-                w.Close();
-            }
-        } catch
-        {
-
-        }
-
-        if (new Random().Next(100) == 1) Cleanup();
-
-
-    }
-
-    public static void Cleanup()
-    {
-        var file = File.ReadAllLines(logFile);
-        int skip = Math.Max(0, file.Count() - 500);
-        File.WriteAllLines(logFile,file.Skip(skip).ToArray());
-    }
-
-}
 
 namespace GHelper
 {
@@ -46,31 +10,6 @@ namespace GHelper
     {
 
 
-        // Native methods for sleep detection
-
-        [DllImport("Powrprof.dll", SetLastError = true)]
-        static extern uint PowerRegisterSuspendResumeNotification(uint flags, ref DEVICE_NOTIFY_SUBSCRIBE_PARAMETERS receipient, ref IntPtr registrationHandle);
-
-
-        private const int WM_POWERBROADCAST = 536; // (0x218)
-        private const int PBT_APMPOWERSTATUSCHANGE = 10; // (0xA) - Power status has changed.
-        private const int PBT_APMRESUMEAUTOMATIC = 18; // (0x12) - Operation is resuming automatically from a low-power state.This message is sent every time the system resumes.
-        private const int PBT_APMRESUMESUSPEND = 7; // (0x7) - Operation is resuming from a low-power state.This message is sent after PBT_APMRESUMEAUTOMATIC if the resume is triggered by user input, such as pressing a key.
-        private const int PBT_APMSUSPEND = 4; // (0x4) - System is suspending operation.
-        private const int PBT_POWERSETTINGCHANGE = 32787; // (0x8013) - A power setting change event has been received.
-        private const int DEVICE_NOTIFY_CALLBACK = 2;
-
-        [StructLayout(LayoutKind.Sequential)]
-        struct DEVICE_NOTIFY_SUBSCRIBE_PARAMETERS
-        {
-            public DeviceNotifyCallbackRoutine Callback;
-            public IntPtr Context;
-        }
-
-        public delegate int DeviceNotifyCallbackRoutine(IntPtr context, int type, IntPtr setting);
-
-        //
-
         public static NotifyIcon trayIcon = new NotifyIcon
         {
             Text = "G-Helper",
@@ -128,20 +67,6 @@ namespace GHelper
             SetAutoModes();
             HardwareMonitor.RecreateGpuTemperatureProvider();
 
-            // Subscribing for native power change events
-
-            /*
-            IntPtr registrationHandle = new IntPtr();
-            DEVICE_NOTIFY_SUBSCRIBE_PARAMETERS recipient = new DEVICE_NOTIFY_SUBSCRIBE_PARAMETERS();
-            recipient.Callback = new DeviceNotifyCallbackRoutine(DeviceNotifyCallback);
-            recipient.Context = IntPtr.Zero;
-
-            IntPtr pRecipient = Marshal.AllocHGlobal(Marshal.SizeOf(recipient));
-            Marshal.StructureToPtr(recipient, pRecipient, false);
-
-            uint result = PowerRegisterSuspendResumeNotification(DEVICE_NOTIFY_CALLBACK, ref recipient, ref registrationHandle);
-            */
-
             // Subscribing for monitor power on events
             var settingGuid = new NativeMethods.PowerSettingGuid();
             unRegPowerNotify = NativeMethods.RegisterPowerSettingNotification(ds, settingGuid.ConsoleDisplayState, NativeMethods.DEVICE_NOTIFY_WINDOW_HANDLE);
@@ -149,29 +74,11 @@ namespace GHelper
             // Subscribing for system power change events
             SystemEvents.PowerModeChanged += SystemEvents_PowerModeChanged;
 
-
             CheckForUpdates();
             Application.Run();
 
         }
 
-        private static int DeviceNotifyCallback(IntPtr context, int type, IntPtr setting)
-        {
-            Logger.WriteLine($"Power callback {type}");
-            switch (type)
-            {
-                case PBT_APMRESUMEAUTOMATIC:
-                    settingsForm.BeginInvoke(delegate
-                    {
-                        SetAutoModes();
-                    });
-                    break;
-            }
-
-            return 0;
-        }
-
-
         static async void CheckForUpdates()
         {
 
@@ -220,7 +127,7 @@ namespace GHelper
             settingsForm.SetBatteryChargeLimit(config.getConfig("charge_limit"));
 
             settingsForm.AutoPerformance(isPlugged);
-            
+
             bool switched = settingsForm.AutoGPUMode(isPlugged);
             if (!switched) settingsForm.AutoScreen(isPlugged);
 

app/Properties/launchSettings.json

@@ -0,0 +1,7 @@
+{
+  "profiles": {
+    "GHelper": {
+      "commandName": "Project"
+    }
+  }
+}

app/RoundedButton.cs

@@ -0,0 +1,78 @@
+using System.ComponentModel;
+using System.Drawing.Drawing2D;
+
+namespace CustomControls
+{
+    public class RoundedButton : Button
+    {
+        //Fields
+        private int borderSize = 5;
+        private int borderRadius = 5;
+        private bool activated = false;
+        private Color borderColor = Color.Transparent;
+
+        public Color BorderColor
+        {
+            get { return borderColor; }
+            set
+            {
+                borderColor = value;
+            }
+        }
+
+
+        public bool Activated
+        {
+            get { return activated; }
+            set
+            {
+                if (activated != value)
+                    this.Invalidate();
+                activated = value;
+            }
+        }
+
+        public RoundedButton()
+        {
+            this.FlatStyle = FlatStyle.Flat;
+            this.FlatAppearance.BorderSize = 0;
+        }
+
+        private GraphicsPath GetFigurePath(Rectangle rect, int radius)
+        {
+            GraphicsPath path = new GraphicsPath();
+            float curveSize = radius * 2F;
+
+            path.StartFigure();
+            path.AddArc(rect.X, rect.Y, curveSize, curveSize, 180, 90);
+            path.AddArc(rect.Right - curveSize, rect.Y, curveSize, curveSize, 270, 90);
+            path.AddArc(rect.Right - curveSize, rect.Bottom - curveSize, curveSize, curveSize, 0, 90);
+            path.AddArc(rect.X, rect.Bottom - curveSize, curveSize, curveSize, 90, 90);
+            path.CloseFigure();
+            return path;
+        }
+
+        protected override void OnPaint(PaintEventArgs pevent)
+        {
+            base.OnPaint(pevent);
+
+            Rectangle rectSurface = this.ClientRectangle;
+            Rectangle rectBorder = Rectangle.Inflate(rectSurface, -borderSize, -borderSize);
+
+            Color borderDrawColor = activated ? borderColor : Color.Transparent;
+
+            using (GraphicsPath pathSurface = GetFigurePath(rectSurface, borderRadius+borderSize))
+            using (GraphicsPath pathBorder = GetFigurePath(rectBorder, borderRadius))
+            using (Pen penSurface = new Pen(this.Parent.BackColor, borderSize))
+            using (Pen penBorder = new Pen(borderDrawColor, borderSize))
+            {
+                penBorder.Alignment = PenAlignment.Outset;
+                pevent.Graphics.SmoothingMode = SmoothingMode.AntiAlias;
+                this.Region = new Region(pathSurface);
+                pevent.Graphics.DrawPath(penSurface, pathSurface);
+                pevent.Graphics.DrawPath(penBorder, pathBorder);
+            }
+        }
+
+    }
+}

app/Settings.Designer.cs

@@ -1,4 +1,6 @@
-namespace GHelper
+using CustomControls;
+
+namespace GHelper
 {
     partial class SettingsForm
     {
@@ -52,23 +54,23 @@
             labelPerf = new Label();
             labelCPUFan = new Label();
             tablePerf = new TableLayoutPanel();
-            buttonTurbo = new Button();
-            buttonBalanced = new Button();
-            buttonSilent = new Button();
+            buttonTurbo = new RoundedButton();
+            buttonBalanced = new RoundedButton();
+            buttonSilent = new RoundedButton();
             panelGPU = new Panel();
             checkGPU = new CheckBox();
             pictureGPU = new PictureBox();
             labelGPU = new Label();
             labelGPUFan = new Label();
             tableGPU = new TableLayoutPanel();
-            buttonUltimate = new Button();
-            buttonStandard = new Button();
-            buttonEco = new Button();
+            buttonUltimate = new RoundedButton();
+            buttonStandard = new RoundedButton();
+            buttonEco = new RoundedButton();
             panelScreen = new Panel();
             checkScreen = new CheckBox();
             tableScreen = new TableLayoutPanel();
-            button120Hz = new Button();
-            button60Hz = new Button();
+            button120Hz = new RoundedButton();
+            button60Hz = new RoundedButton();
             pictureScreen = new PictureBox();
             labelSreen = new Label();
             panelKeyboard = new Panel();
@@ -402,11 +404,14 @@
             // 
             // buttonTurbo
             // 
+            buttonTurbo.Activated = false;
             buttonTurbo.BackColor = SystemColors.ControlLightLight;
+            buttonTurbo.BorderColor = Color.Transparent;
             buttonTurbo.Dock = DockStyle.Fill;
             buttonTurbo.FlatAppearance.BorderColor = Color.FromArgb(192, 0, 0);
             buttonTurbo.FlatAppearance.BorderSize = 0;
             buttonTurbo.FlatStyle = FlatStyle.Flat;
+            buttonTurbo.ForeColor = SystemColors.ControlText;
             buttonTurbo.Location = new Point(464, 12);
             buttonTurbo.Margin = new Padding(8, 12, 8, 12);
             buttonTurbo.Name = "buttonTurbo";
@@ -417,11 +422,14 @@
             // 
             // buttonBalanced
             // 
+            buttonBalanced.Activated = false;
             buttonBalanced.BackColor = SystemColors.ControlLightLight;
+            buttonBalanced.BorderColor = Color.Transparent;
             buttonBalanced.Dock = DockStyle.Fill;
             buttonBalanced.FlatAppearance.BorderColor = Color.FromArgb(0, 0, 192);
             buttonBalanced.FlatAppearance.BorderSize = 0;
             buttonBalanced.FlatStyle = FlatStyle.Flat;
+            buttonBalanced.ForeColor = SystemColors.ControlText;
             buttonBalanced.Location = new Point(236, 12);
             buttonBalanced.Margin = new Padding(8, 12, 8, 12);
             buttonBalanced.Name = "buttonBalanced";
@@ -432,12 +440,15 @@
             // 
             // buttonSilent
             // 
+            buttonSilent.Activated = false;
             buttonSilent.BackColor = SystemColors.ControlLightLight;
+            buttonSilent.BorderColor = Color.Transparent;
             buttonSilent.CausesValidation = false;
             buttonSilent.Dock = DockStyle.Fill;
             buttonSilent.FlatAppearance.BorderColor = Color.FromArgb(0, 192, 192);
             buttonSilent.FlatAppearance.BorderSize = 0;
             buttonSilent.FlatStyle = FlatStyle.Flat;
+            buttonSilent.ForeColor = SystemColors.ControlText;
             buttonSilent.Location = new Point(8, 12);
             buttonSilent.Margin = new Padding(8, 12, 8, 12);
             buttonSilent.Name = "buttonSilent";
@@ -527,10 +538,13 @@
             // 
             // buttonUltimate
             // 
+            buttonUltimate.Activated = false;
             buttonUltimate.BackColor = SystemColors.ControlLightLight;
+            buttonUltimate.BorderColor = Color.Transparent;
             buttonUltimate.Dock = DockStyle.Fill;
             buttonUltimate.FlatAppearance.BorderSize = 0;
             buttonUltimate.FlatStyle = FlatStyle.Flat;
+            buttonUltimate.ForeColor = SystemColors.ControlText;
             buttonUltimate.Location = new Point(464, 12);
             buttonUltimate.Margin = new Padding(8, 12, 8, 12);
             buttonUltimate.Name = "buttonUltimate";
@@ -541,10 +555,13 @@
             // 
             // buttonStandard
             // 
+            buttonStandard.Activated = false;
             buttonStandard.BackColor = SystemColors.ControlLightLight;
+            buttonStandard.BorderColor = Color.Transparent;
             buttonStandard.Dock = DockStyle.Fill;
             buttonStandard.FlatAppearance.BorderSize = 0;
             buttonStandard.FlatStyle = FlatStyle.Flat;
+            buttonStandard.ForeColor = SystemColors.ControlText;
             buttonStandard.Location = new Point(236, 12);
             buttonStandard.Margin = new Padding(8, 12, 8, 12);
             buttonStandard.Name = "buttonStandard";
@@ -555,11 +572,14 @@
             // 
             // buttonEco
             // 
+            buttonEco.Activated = false;
             buttonEco.BackColor = SystemColors.ControlLightLight;
+            buttonEco.BorderColor = Color.Transparent;
             buttonEco.CausesValidation = false;
             buttonEco.Dock = DockStyle.Fill;
             buttonEco.FlatAppearance.BorderSize = 0;
             buttonEco.FlatStyle = FlatStyle.Flat;
+            buttonEco.ForeColor = SystemColors.ControlText;
             buttonEco.Location = new Point(8, 12);
             buttonEco.Margin = new Padding(8, 12, 8, 12);
             buttonEco.Name = "buttonEco";
@@ -614,11 +634,13 @@
             // 
             // button120Hz
             // 
+            button120Hz.Activated = false;
             button120Hz.BackColor = SystemColors.ControlLightLight;
+            button120Hz.BorderColor = Color.Transparent;
             button120Hz.Dock = DockStyle.Fill;
-            button120Hz.FlatAppearance.BorderColor = SystemColors.ActiveBorder;
             button120Hz.FlatAppearance.BorderSize = 0;
             button120Hz.FlatStyle = FlatStyle.Flat;
+            button120Hz.ForeColor = SystemColors.ControlText;
             button120Hz.Location = new Point(236, 12);
             button120Hz.Margin = new Padding(8, 12, 8, 12);
             button120Hz.Name = "button120Hz";
@@ -629,10 +651,11 @@
             // 
             // button60Hz
             // 
+            button60Hz.Activated = false;
             button60Hz.BackColor = SystemColors.ControlLightLight;
+            button60Hz.BorderColor = Color.Transparent;
             button60Hz.CausesValidation = false;
             button60Hz.Dock = DockStyle.Fill;
-            button60Hz.FlatAppearance.BorderColor = SystemColors.ActiveBorder;
             button60Hz.FlatAppearance.BorderSize = 0;
             button60Hz.FlatStyle = FlatStyle.Flat;
             button60Hz.ForeColor = SystemColors.ControlText;
@@ -774,10 +797,10 @@
             // 
             pictureKeyboard.BackgroundImage = Properties.Resources.icons8_keyboard_48;
             pictureKeyboard.BackgroundImageLayout = ImageLayout.Zoom;
-            pictureKeyboard.Location = new Point(25, 16);
+            pictureKeyboard.Location = new Point(27, 16);
             pictureKeyboard.Margin = new Padding(4, 2, 4, 2);
             pictureKeyboard.Name = "pictureKeyboard";
-            pictureKeyboard.Size = new Size(36, 36);
+            pictureKeyboard.Size = new Size(32, 36);
             pictureKeyboard.TabIndex = 33;
             pictureKeyboard.TabStop = false;
             // 
@@ -868,23 +891,23 @@
         private Label labelPerf;
         private Label labelCPUFan;
         private TableLayoutPanel tablePerf;
-        private Button buttonTurbo;
-        private Button buttonBalanced;
-        private Button buttonSilent;
+        private RoundedButton buttonTurbo;
+        private RoundedButton buttonBalanced;
+        private RoundedButton buttonSilent;
         private Panel panelGPU;
         private CheckBox checkGPU;
         private PictureBox pictureGPU;
         private Label labelGPU;
         private Label labelGPUFan;
         private TableLayoutPanel tableGPU;
-        private Button buttonUltimate;
-        private Button buttonStandard;
-        private Button buttonEco;
+        private RoundedButton buttonUltimate;
+        private RoundedButton buttonStandard;
+        private RoundedButton buttonEco;
         private Panel panelScreen;
         private CheckBox checkScreen;
         private TableLayoutPanel tableScreen;
-        private Button button120Hz;
-        private Button button60Hz;
+        private RoundedButton button120Hz;
+        private RoundedButton button60Hz;
         private PictureBox pictureScreen;
         private Label labelSreen;
         private Panel panelKeyboard;

app/Settings.cs

@@ -14,9 +14,6 @@ namespace GHelper
         static Color colorStandard = Color.FromArgb(255, 58, 174, 239);
         static Color colorTurbo = Color.FromArgb(255, 255, 32, 32);
 
-        static int buttonInactive = 0;
-        static int buttonActive = 5;
-
         static System.Timers.Timer aTimer = default!;
         static System.Timers.Timer matrixTimer = default!;
 
@@ -36,13 +33,16 @@ namespace GHelper
 
             FormClosing += SettingsForm_FormClosing;
 
-            buttonSilent.FlatAppearance.BorderColor = colorEco;
-            buttonBalanced.FlatAppearance.BorderColor = colorStandard;
-            buttonTurbo.FlatAppearance.BorderColor = colorTurbo;
+            buttonSilent.BorderColor = colorEco;
+            buttonBalanced.BorderColor = colorStandard;
+            buttonTurbo.BorderColor = colorTurbo;
 
-            buttonEco.FlatAppearance.BorderColor = colorEco;
-            buttonStandard.FlatAppearance.BorderColor = colorStandard;
-            buttonUltimate.FlatAppearance.BorderColor = colorTurbo;
+            buttonEco.BorderColor = colorEco;
+            buttonStandard.BorderColor = colorStandard;
+            buttonUltimate.BorderColor = colorTurbo;
+
+            button60Hz.BorderColor = SystemColors.ActiveBorder;
+            button120Hz.BorderColor = SystemColors.ActiveBorder;
 
             buttonSilent.Click += ButtonSilent_Click;
             buttonBalanced.Click += ButtonBalanced_Click;
@@ -599,12 +599,12 @@ namespace GHelper
                 Logger.WriteLine("Screen Overdrive not supported");
             }
 
-            button60Hz.FlatAppearance.BorderSize = buttonInactive;
-            button120Hz.FlatAppearance.BorderSize = buttonInactive;
+            button60Hz.Activated = false;
+            button120Hz.Activated = false;
 
             if (frequency == 60)
             {
-                button60Hz.FlatAppearance.BorderSize = buttonActive;
+                button60Hz.Activated = true;
             }
             else
             {
@@ -612,7 +612,7 @@ namespace GHelper
                     maxFrequency = frequency;
 
                 Program.config.setConfig("max_frequency", maxFrequency);
-                button120Hz.FlatAppearance.BorderSize = buttonActive;
+                button120Hz.Activated = true;
             }
 
             if (maxFrequency > 60)
@@ -741,9 +741,11 @@ namespace GHelper
             if (limit_cpu > ASUSWmi.MaxCPU) return;
             if (limit_cpu < ASUSWmi.MinCPU) return;
 
-            Program.wmi.DeviceSet(ASUSWmi.PPT_TotalA0, limit_total);
-            Program.wmi.DeviceSet(ASUSWmi.PPT_TotalA1, limit_total);
-            Program.wmi.DeviceSet(ASUSWmi.PPT_CPUB0, limit_cpu);
+            if (Program.wmi.DeviceGet(ASUSWmi.PPT_TotalA0) >= 0)
+                Program.wmi.DeviceSet(ASUSWmi.PPT_TotalA0, limit_total);
+
+            if (Program.wmi.DeviceGet(ASUSWmi.PPT_CPUB0) >= 0)
+                Program.wmi.DeviceSet(ASUSWmi.PPT_CPUB0, limit_cpu);
 
             Logger.WriteLine("PowerLimits " + limit_total.ToString() + ", " + limit_cpu.ToString());
 
@@ -777,22 +779,23 @@ namespace GHelper
         public void SetPerformanceMode(int PerformanceMode = ASUSWmi.PerformanceBalanced, bool notify = false)
         {
 
-            buttonSilent.FlatAppearance.BorderSize = buttonInactive;
-            buttonBalanced.FlatAppearance.BorderSize = buttonInactive;
-            buttonTurbo.FlatAppearance.BorderSize = buttonInactive;
+
+            buttonSilent.Activated = false;
+            buttonBalanced.Activated = false;
+            buttonTurbo.Activated = false;
 
             switch (PerformanceMode)
             {
                 case ASUSWmi.PerformanceSilent:
-                    buttonSilent.FlatAppearance.BorderSize = buttonActive;
+                    buttonSilent.Activated = true;
                     perfName = "Silent";
                     break;
                 case ASUSWmi.PerformanceTurbo:
-                    buttonTurbo.FlatAppearance.BorderSize = buttonActive;
+                    buttonTurbo.Activated = true;
                     perfName = "Turbo";
                     break;
                 default:
-                    buttonBalanced.FlatAppearance.BorderSize = buttonActive;
+                    buttonBalanced.Activated = true;
                     PerformanceMode = ASUSWmi.PerformanceBalanced;
                     perfName = "Balanced";
                     break;
@@ -819,6 +822,13 @@ namespace GHelper
 
             AutoFansAndPower();
 
+            NativeMethods.SetPowerScheme(PerformanceMode);
+
+            if (NativeMethods.PowerGetEffectiveOverlayScheme(out Guid activeScheme) == 0)
+            {
+                Debug.WriteLine("Effective :" + activeScheme);
+            }
+
             if (fans != null && fans.Text != "")
             {
                 fans.InitFans();
@@ -931,6 +941,14 @@ namespace GHelper
             new Thread(() =>
             {
                 Thread.CurrentThread.IsBackground = true;
+
+                if (eco == 1)
+                {
+                    string[] tokill = { "EADesktop" };
+                    foreach (string kill in tokill)
+                        foreach (var process in Process.GetProcessesByName(kill)) process.Kill();
+                }
+
                 Program.wmi.DeviceSet(ASUSWmi.GPUEco, eco);
                 Program.settingsForm.BeginInvoke(delegate
                 {
@@ -939,7 +957,10 @@ namespace GHelper
                     Thread.Sleep(500);
                     AutoScreen(SystemInformation.PowerStatus.PowerLineStatus);
                 });
-            }).Start();
+            })
+            {
+
+            }.Start();
 
         }
 
@@ -1022,24 +1043,24 @@ namespace GHelper
                 GPUMode = Program.config.getConfig("gpu_mode");
             }
 
-            buttonEco.FlatAppearance.BorderSize = buttonInactive;
-            buttonStandard.FlatAppearance.BorderSize = buttonInactive;
-            buttonUltimate.FlatAppearance.BorderSize = buttonInactive;
+            buttonEco.Activated = false;
+            buttonStandard.Activated = false;
+            buttonUltimate.Activated = false;
 
             switch (GPUMode)
             {
                 case ASUSWmi.GPUModeEco:
-                    buttonEco.FlatAppearance.BorderSize = buttonActive;
+                    buttonEco.Activated = true;
                     labelGPU.Text = "GPU Mode: iGPU only";
                     Program.trayIcon.Icon = GHelper.Properties.Resources.eco;
                     break;
                 case ASUSWmi.GPUModeUltimate:
-                    buttonUltimate.FlatAppearance.BorderSize = buttonActive;
+                    buttonUltimate.Activated = true;
                     labelGPU.Text = "GPU Mode: dGPU exclusive";
                     Program.trayIcon.Icon = GHelper.Properties.Resources.ultimate;
                     break;
                 default:
-                    buttonStandard.FlatAppearance.BorderSize = buttonActive;
+                    buttonStandard.Activated = true;
                     labelGPU.Text = "GPU Mode: iGPU + dGPU";
                     Program.trayIcon.Icon = GHelper.Properties.Resources.standard;
                     break;

debloat.bat

@@ -5,6 +5,7 @@ sc STOP  ASUSSoftwareManager
 sc STOP  ASUSSwitch
 sc STOP  ASUSSystemAnalysis
 sc STOP  ASUSSystemDiagnosis
+sc STOP ArmouryCrateControlInterface
 
 sc DELETE  AsusAppService
 sc DELETE  ASUSLinkNear
@@ -13,3 +14,4 @@ sc DELETE  ASUSSoftwareManager
 sc DELETE  ASUSSwitch
 sc DELETE  ASUSSystemAnalysis
 sc DELETE  ASUSSystemDiagnosis
+sc DELETE  ArmouryCrateControlInterface

docs/README.md

@@ -0,0 +1,108 @@
+# [G-Helper (GHelper)](https://github.com/seerge/g-helper)
+
+[![Github all releases](https://img.shields.io/github/downloads/seerge/g-helper/total.svg)](https://GitHub.com/seerge/g-helper/releases/) [![GitHub release](https://img.shields.io/github/release/seerge/g-helper.svg)](https://GitHub.com/seerge/g-helper/releases/) [![GitHub license](https://badgen.net/github/license/seerge/g-helper)](https://github.com/seerge/g-helper/blob/master/LICENSE)
+ [![GitHub stars](https://img.shields.io/github/stars/seerge/g-helper.svg?style=social&label=Star&maxAge=2592000)](https://GitHub.com/seerge/g-helper/stargazers/)
+
+## Open source Armory Crate alternative for Asus ROG Zephyrus G14, G15, Flow X13, Flow X16, and other models
+
+A small utility that allows you to do almost everything you could do with Armory Crate but without extra bloat and unnecessary services.
+
+### :gift: Main advantages 
+
+1. Seamless and automatic GPU switching (without asking you to close all apps, etc)
+2. All performance modes can be fully customized (with fan curves and PPTs)
+3. Very lightweight and consumes almost no resources, doesn't install any services. Just a single exe to run
+
+### [:floppy_disk: Download latest release](https://github.com/seerge/g-helper/releases/latest/download/GHelper.zip)
+
+If you like this app, please star :star: it on Github and spread a word about it!
+
+![Screenshot](https://raw.githubusercontent.com/seerge/g-helper/main/docs/screenshot.png)
+
+### :zap: Main features
+
+1. Built-in **Performance modes**: Silent - Balanced - Turbo (with default fan curves)
+2. **GPU modes**: Eco -Standard - Ultimate 
+3. Laptop screen refresh rate 60hz or 120hz (144hz, etc depending on the model) with display overdrive (OD)
+4. Default and custom fan profiles for every performance mode
+5. Power limits (PPT) for every performance mode
+6. CPU turbo boost mode
+7. Keyboard backlit animation and colors
+8. Anime matrix control thanks to [Starlight](https://github.com/vddCore/Starlight) + some tweaks from my side (including animated GIFs)
+9. FN+F5 cycles performance modes, FN+F4 cycles keyboard animation modes
+10. Keybindings for M3 and M4 keys
+11. Battery charge limit to preserve battery health
+12. Monitor CPU / GPU temperature, fan speeds and battery discharge rate
+
+### :apple: Automatic switching of modes when on battery or plugged in
+- Performance modes (app remembers last mode used on battery or when plugged)
+- GPU modes (eco on battery, stanard when plugged)
+- Screen refresh rate (60hz on battery, 120+ hz when plugged)
+
+To keep auto switching and hotkeys working the app needs to stay in running in the tray. It doesn't consume any resources. 
+
+### :rocket: Performance Modes
+
+Modes are **same** as in Armory Crate (as they are stored in bios), including default fan curves
+
+1. Silent (minimal or no fans, 70W PPT total, up to 45W PPT to CPU) + Best power efficiency setting in windows
+2. Balanced (balanced fans, 100W PPT total, up to 45W PPT to CPU) + Balanced setting in windows
+3. Turbo (intense fans, 125W PPT total, up to 80W PPT to CPU) + Best performance setting in windows
+
+PPTs are shown for G14 2022, for other models PPTs will be different as they are set in bios.
+
+### :video_game: GPU Modes
+
+1. Eco mode : only low power integrated GPU enabled, iGPU drives built in display
+2. Standard mode (Windows Hybrid) : iGPU and dGPU enabled, iGPU drives built in display
+3. Ultimate mode: iGPU and dGPU enabled, but dGPU drives built in display (supported only on G14 2022 model)
+
+### :question: FAQ
+
+#### How do I stop Armory Crate install popup appearing every time I press M4 / Rog key?
+Go to BIOS (F2 on boot), open Advanced Settings (F8) and disable "Armory Control Intrerface"  
+
+#### Why Ultimate GPU mode is not available on my laptop?
+Ultimate mode is supported (by hardware) only on G14 2022 (and possibly other models from 2022+)
+
+#### App doesn't start / or crashes, what should I do ?
+Open "Event Viewer" from start menu, go to Windows Logs -> Application and check for recent Errors mentioning G-Helper. If you see one - please post a [new issue](https://github.com/seerge/g-helper/issues) with all details from this error.
+
+----------------------------
+
+### How to install
+
+1. Download latest release from [**Releases Page**](https://github.com/seerge/g-helper/releases)
+2. Unzip to a folder of your choice
+3. Run **GHelper.exe**
+
+### Dependencies
+
+- App requires [.NET7](https://dotnet.microsoft.com/en-us/download) to be installed. Most probably you already have it. Otherwise you can [download it](https://dotnet.microsoft.com/en-us/download).
+
+- I recommend keeping "Asus Optimization Service" running, as it keeps basic laptop hotkeys such as screen or keyboard brightness adjustment working. If you have (or had) MyASUS app installed, that service is most probably still up and running even after MyASUS uninstalls. It's part of [Asus System Control Interface](https://www.asus.com/support/FAQ/1047338/). You can install it, and later disable / remove unnecessary services by running [this bat file](https://raw.githubusercontent.com/seerge/g-helper/main/debloat.bat) as admin.
+
+- It's not recommended to use an app in combination with Armory Crate, cause they adjust the same settings. You can [uninstall it using it's own uninstall tool](https://dlcdnets.asus.com/pub/ASUS/mb/14Utilities/Armoury_Crate_Uninstall_Tool.zip?model=armoury%20crate). Just in case, you can always install it back later.
+
+Note: Doesn't need administrator privileges to run!
+
+-------------------------------
+
+Designed and developed for Asus Zephyrus G14 2022 (with AMD Radeon iGPU and dGPU). But could and should potentially work for G14 of 2021 and 2020, G15, X FLOW, and other ROG models for relevant and supported features.
+
+I don't have a Microsoft certificate to sign the app yet, so if you get a warning from Windows Defender on launch (Windows Protected your PC), click More Info -> Run anyway. Alternatively you can compile and run project by yourself using Visual Studio :)
+
+Settings file is stored at ``%AppData%\GHelper``
+
+------------------
+
+Debloating helps to save your battery and keep laptop a bit cooler
+
+![Helps to save your battery](https://raw.githubusercontent.com/seerge/g-helper/main/docs/screenshots/screen-5w.png)
+
+---------
+
+**Disclaimers**
+"ROG", "TUF", and "Armoury Crate" are trademarked by and belong to AsusTek Computer, Inc. I make no claims to these or any assets belonging to AsusTek Computer and use them purely for informational purposes only.
+
+THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. MISUSE OF THIS SOFTWARE COULD CAUSE SYSTEM INSTABILITY OR MALFUNCTION.

docs/_config.yml

@@ -0,0 +1,4 @@
+title: G-Helper
+description: Open source Armory Crate alternative for Asus ROG Zephyrus G14, G15, Flow X13, Flow X16, and other models
+plugins:
+  - jemoji

docs/_layouts/default.html

@@ -0,0 +1,26 @@
+<!DOCTYPE html>
+<html lang="{{ page.lang | default: site.lang | default: "en-US" }}">
+  <head>
+    <meta charset="UTF-8">
+    <meta http-equiv="X-UA-Compatible" content="IE=edge">
+    <meta name="viewport" content="width=device-width, initial-scale=1">
+
+{% seo %}
+    <link rel="stylesheet" href="{{ "/assets/css/style.css?v=" | append: site.github.build_revision | relative_url }}">
+    {% include head-custom.html %}
+  </head>
+  <body>
+    <div class="container-lg px-3 my-5 markdown-body">
+
+      {{ content }}
+
+      {% if site.github.private != true and site.github.license %}
+      <div class="footer border-top border-gray-light mt-5 pt-3 text-right text-gray">
+        This site is open source. {% github_edit_link "Improve this page" %}.
+      </div>
+      {% endif %}
+    </div>
+    <script src="https://cdnjs.cloudflare.com/ajax/libs/anchor-js/4.1.0/anchor.min.js" integrity="sha256-lZaRhKri35AyJSypXXs4o6OPFTbTmUoltBbDCbdzegg=" crossorigin="anonymous"></script>
+    <script>anchors.add();</script>
+  </body>
+</html>