change to only esp as serial prefix

add serial_prefix to config
Move uart and modbus to main file
2026-04-10 13:00:27 +02:00 · 2024-05-27 21:31:27 +02:00 · 2024-05-27 20:32:25 +02:00 · 2024-05-23 20:11:00 +02:00 · 2024-05-22 19:37:04 +02:00 · 2024-05-22 17:03:31 +02:00
23 changed files with 1244 additions and 110 deletions
--- a/boneio-24x16_switches_v0_5-v0_6.yaml
+++ b/boneio-24x16_switches_v0_5-v0_6.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp24x16-switches
+  name: boneio-24-sw-06
  friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.24x16-switches-v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
        'devices_v0_5-v0_6/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -576,3 +577,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-24x16_switches_v0_7.yaml
+++ b/boneio-24x16_switches_v0_7.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp24x16-switches
+  name: boneio-24-sw-07
  friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.24x16-switches
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
        'devices_v0_7/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -572,3 +573,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_5-v0_6.yaml
+++ b/boneio-32x10_lights_v0_5-v0_6.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-lights-v0_5-v0_6
+  name: boneio-32-l-06
  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-lights_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -39,14 +42,12 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
  baud_rate: 0 #IMPORTANT FOR V0.5-V0.6 TO GET MODBUS WORKING
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -633,3 +634,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_7.yaml
+++ b/boneio-32x10_lights_v0_7.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-lights-0.7
+  name: boneio-32-l-07
  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-lights
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -38,13 +41,12 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
+  reboot_timeout: 0s
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -628,3 +630,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_5-v0_6.yaml
+++ b/boneio-32x10_switches_v0_5-v0_6.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-switches-v0_5-v0_6
+  name: boneio-32-sw-06
  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-lights_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -632,3 +633,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_7.yaml
+++ b/boneio-32x10_switches_v0_7.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp32x10-switches-0.7
+  name: boneio-32-sw-07
  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-lights
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -628,3 +629,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_lights_v0_5-v0_6.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix-v0_5-v0_6
+  name: boneio-cm-l-06
  friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-cover-mix-lights_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -737,3 +738,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_7.yaml
+++ b/boneio-cover_mix_lights_v0_7.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix-0.7
+  name: boneio-cm-l-07
  friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-cover-mix-lights
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -733,3 +734,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_switches_v0_5-v0_6.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix-v0_5-v0_6
+  name: boneio-cm-sw-06
  friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-cover-mix-switches_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -736,3 +737,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_7.yaml
+++ b/boneio-cover_mix_switches_v0_7.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-cover-mix-0.7
+  name: boneio-cm-sw-07
  friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-cover-mix-switches
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -733,3 +734,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_5-v0_6.yaml
+++ b/boneio-cover_v0_5-v0_6.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-covers-v0_5-v0_6
+  name: boneio-c-06
  friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-cover_v0_5-v0_6
-    version: '1.0'
+    version: '0.6'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -39,13 +42,11 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -839,3 +840,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_7.yaml
+++ b/boneio-cover_v0_7.yaml
@@ -1,16 +1,18 @@
 substitutions:
-  name: boneio-esp-covers-0.7
+  name: boneio-c-07
  friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
  friendly_name: '${friendly_name}'
-  platform: ESP32
-  board: nodemcu-32s
  name_add_mac_suffix: true
  project:
    name: boneio.32x10-cover
-    version: '1.0'
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s

 ethernet:
  id: eth
@@ -22,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.1
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.1
+    ref: v1.0.17
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
        'devices_v0_7/ina219.yaml',
@@ -38,13 +41,11 @@ packages:
        'devices_v0_7/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
-  password: boneio

 web_server:
  port: 80
@@ -835,3 +836,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-dimmer_2rgbw-v0_3.yaml
+++ b/boneio-dimmer_2rgbw-v0_3.yaml
@@ -0,0 +1,220 @@
+substitutions:
+  name: boneio-dr-rgbw-03
+  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led
+    version: '0.3'
+
+esp32:
+  board: esp32dev
+
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.16
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+text_sensor:
+  - platform: version
+    name: 'boneio-dimmer- Version'
+    icon: mdi:cube-outline
+    entity_category: diagnostic
+  - platform: ethernet_info
+    ip_address:
+      entity_category: diagnostic
+      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_02'
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_03'
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_04'
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_05'
+    pin:
+      number: 36
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_06'
+    pin:
+      number: 39
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_07'
+    pin:
+      number: 34
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_08'
+    pin:
+      number: 35
+      mode:
+        input: true
+      inverted: true
+
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+light:
+  - platform: rgbw
+    name: 'RGBW L'
+    red: chl01
+    green: chl02
+    blue: chl03
+    white: chl04
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: rgbw
+    name: 'RGBW R'
+    red: chr01
+    green: chr02
+    blue: chr03
+    white: chr04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true
--- a/boneio-dimmer_4cct-v0_3.yaml
+++ b/boneio-dimmer_4cct-v0_3.yaml
@@ -0,0 +1,230 @@
+substitutions:
+  name: boneio-dr-4cct-03
+  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led
+    version: '0.3'
+
+esp32:
+  board: esp32dev
+
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.16
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+text_sensor:
+  - platform: version
+    name: 'boneio-dimmer- Version'
+    icon: mdi:cube-outline
+    entity_category: diagnostic
+  - platform: ethernet_info
+    ip_address:
+      entity_category: diagnostic
+      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_02'
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_03'
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_04'
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_05'
+    pin:
+      number: 36
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_06'
+    pin:
+      number: 39
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_07'
+    pin:
+      number: 34
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_08'
+    pin:
+      number: 35
+      mode:
+        input: true
+      inverted: true
+
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+light:
+  - platform: cwww
+    name: 'CHL_01_02'
+    cold_white: chl01
+    warm_white: chl02
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+  - platform: cwww
+    name: 'CHL_03_04'
+    cold_white: chl03
+    warm_white: chl04
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+  - platform: cwww
+    name: 'CHR_01_02'
+    cold_white: chl01
+    warm_white: chl02
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+  - platform: cwww
+    name: 'CHR_03_04'
+    cold_white: chl03
+    warm_white: chl04
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true
--- a/boneio-dimmer_8ch-v0_3.yaml
+++ b/boneio-dimmer_8ch-v0_3.yaml
@@ -0,0 +1,253 @@
+substitutions:
+  name: boneio-dr-8ch-03
+  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.dimmer-led
+    version: '0.3'
+
+esp32:
+  board: esp32dev
+
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.0.16
+    files:
+      [
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices/dimmer_ina219.yaml',
+      ]
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
+  import_full_config: true
+
+pcf8574:
+  - id: 'pcf_inputs'
+    address: 0x38
+
+logger:
+api:
+ota:
+
+web_server:
+  port: 80
+  local: true
+
+text_sensor:
+  - platform: version
+    name: 'boneio-dimmer- Version'
+    icon: mdi:cube-outline
+    entity_category: diagnostic
+  - platform: ethernet_info
+    ip_address:
+      entity_category: diagnostic
+      name: boneio-dimmer IP
+  - platform: template
+    name: 'Hostname'
+    id: hostname
+    entity_category: diagnostic
+    lambda: |-
+      return id(eth).get_use_address();
+    update_interval: 5min
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    pin:
+      pcf8574: pcf_inputs
+      number: 1
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_02'
+    pin:
+      pcf8574: pcf_inputs
+      number: 2
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_03'
+    pin:
+      pcf8574: pcf_inputs
+      number: 3
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_04'
+    pin:
+      pcf8574: pcf_inputs
+      number: 4
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_05'
+    pin:
+      number: 36
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_06'
+    pin:
+      number: 39
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_07'
+    pin:
+      number: 34
+      mode:
+        input: true
+      inverted: true
+  - platform: gpio
+    name: 'IN_08'
+    pin:
+      number: 35
+      mode:
+        input: true
+      inverted: true
+
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
+
+light:
+  - platform: monochromatic
+    output: chl01
+    name: 'CHL 01'
+    id: chl_01
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chl02
+    name: 'CHL 02'
+    id: chl_02
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chl03
+    name: 'CHL 03'
+    id: chl_03
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chl04
+    name: 'CHL 04'
+    id: chl_04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+  - platform: monochromatic
+    output: chr01
+    name: 'CHR 01'
+    id: chr_01
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chr02
+    name: 'CHR 02'
+    id: chr_02
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chr03
+    name: 'CHR 03'
+    id: chr_03
+    default_transition_length: 2s
+    gamma_correct: 0
+  - platform: monochromatic
+    output: chr04
+    name: 'CHR 04'
+    id: chr_04
+    default_transition_length: 2s
+    gamma_correct: 0
+
+sensor:
+  - platform: lm75
+    id: boneIO_temp
+    name: 'Temperature'
+    update_interval: 30s
+    entity_category: diagnostic
+    on_value_range:
+      - above: 70.0
+        then:
+          - switch.turn_on: buzzer
+      - below: 70.0
+        then:
+          - switch.turn_off: buzzer
+
+switch:
+  - platform: gpio
+    id: buzzer
+    name: 'Buzzer'
+    pin:
+      pcf8574: pcf_inputs
+      number: 0
+      mode:
+        output: true
+      inverted: true
--- a/create_firmware.py
+++ b/create_firmware.py
@@ -0,0 +1,74 @@
+#!/usr/bin/python
+import subprocess
+import glob
+import os
+import re
+import json
+import shutil
+from pathlib import Path
+
+home = str(Path.home())
+
+
+cwd = os.getcwd()
+
+
+pattern = r"name:\s*(\S+)"
+json_destination = "../website/public/esp"
+firmware_destination = "../website/public/esp/firmware"
+
+
+def json_pattern(firmware_name):
+    return {
+        "name": "ESPHome",
+        "version": "2024.5.0",
+        "home_assistant_domain": "esphome",
+        "funding_url": "https://esphome.io/guides/supporters.html",
+        "new_install_prompt_erase": False,
+        "builds": [
+            {
+                "chipFamily": "ESP32",
+                "parts": [
+                    {
+                        "path": f"/esp/firmware/{firmware_name}.bin",
+                        "offset": 0,
+                    }
+                ],
+            }
+        ],
+    }
+
+
+def get_boneio_name(file):
+    with open(file) as f:
+        next(f)
+        name = next(f)
+        match = re.search(pattern, name)
+        if match:
+            extracted_text = match.group(1)
+            return extracted_text
+        return None
+
+
+for file in glob.glob("*.yaml"):
+    filename = get_boneio_name(file)
+    if not filename:
+        print("No file found.")
+        break
+    firmware_path = f"{cwd}/.esphome/build/{filename}/.pioenvs/{filename}/firmware-factory.bin"
+    print("CWD", cwd)
+    subprocess.run(
+        f'docker run --rm -p 6052:6052 -v "{cwd}":/config -it ghcr.io/esphome/esphome compile {file}',
+        shell=True,
+    )
+    shutil.copyfile(firmware_path, f"{firmware_destination}/{filename}.bin")
+
+    with open(
+        f"{json_destination}/{filename}.json", "w", encoding="utf-8"
+    ) as f:
+        json.dump(
+            json_pattern(firmware_name=filename),
+            f,
+            ensure_ascii=False,
+            indent=4,
+        )
--- a/devices/dimmer_i2c.yaml
+++ b/devices/dimmer_i2c.yaml
@@ -0,0 +1,5 @@
+i2c:
+  sda: GPIO4
+  scl: GPIO5
+  scan: True
+  frequency: 400kHz
--- a/devices/dimmer_ina219.yaml
+++ b/devices/dimmer_ina219.yaml
@@ -0,0 +1,37 @@
+sensor:
+  - platform: ina219
+    address: 0x40
+    shunt_resistance: 0.005 ohm
+    bus_voltage:
+      name: 'VDDL Supply'
+      entity_category: diagnostic
+    power:
+      name: 'VDDL Power'
+      entity_category: diagnostic
+    current:
+      name: 'VDDL Current'
+      entity_category: diagnostic
+    shunt_voltage:
+      name: 'VDDL Shunt Voltage'
+      entity_category: diagnostic
+    max_voltage: 32V
+    max_current: 10A
+    update_interval: 5s
+  - platform: ina219
+    address: 0x41
+    shunt_resistance: 0.005 ohm
+    bus_voltage:
+      name: 'VDDR Supply'
+      entity_category: diagnostic
+    power:
+      name: 'VDDR Power'
+      entity_category: diagnostic
+    current:
+      name: 'VDDR Current'
+      entity_category: diagnostic
+    shunt_voltage:
+      name: 'VDDR Shunt Voltage'
+      entity_category: diagnostic
+    max_voltage: 32V
+    max_current: 10A
+    update_interval: 5s
--- a/devices/dimmer_outputs.yaml
+++ b/devices/dimmer_outputs.yaml
@@ -0,0 +1,42 @@
+output:
+  - platform: ledc
+    pin: 33
+    frequency: 1000Hz
+    inverted: false
+    id: chl01
+  - platform: ledc
+    pin: 32
+    frequency: 1000Hz
+    inverted: false
+    id: chl02
+  - platform: ledc
+    pin: 12
+    frequency: 1000Hz
+    inverted: false
+    id: chl03
+  - platform: ledc
+    pin: 14
+    frequency: 1000Hz
+    inverted: false
+    id: chl04
+
+  - platform: ledc
+    pin: 13
+    frequency: 1000Hz
+    inverted: false
+    id: chr01
+  - platform: ledc
+    pin: 15
+    frequency: 1000Hz
+    inverted: false
+    id: chr02
+  - platform: ledc
+    pin: 2
+    frequency: 1000Hz
+    inverted: false
+    id: chr03
+  - platform: ledc
+    pin: 17
+    frequency: 1000Hz
+    inverted: false
+    id: chr04
--- a/devices/serial_no.yaml
+++ b/devices/serial_no.yaml
@@ -0,0 +1,9 @@
+text_sensor:
+  - platform: template
+    name: 'Serial No.'
+    lambda: |-
+      std::string mac = get_mac_address();
+      return to_string("${serial_prefix}") + mac.erase(0, mac.length()/2);
+    icon: mdi:expansion-card-variant
+    entity_category: diagnostic
+    update_interval: 60min
--- a/devices_v0_5-v0_6/uart.yaml
+++ b/devices_v0_5-v0_6/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin3_1
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1
--- a/devices_v0_7/one_wire.yaml
+++ b/devices_v0_7/one_wire.yaml
@@ -1,6 +1,5 @@
 dallas:
- pin: GPIO32
-
+  - pin: GPIO32
 # sensor:
 #   - platform: dallas
 #     address: 0x283c01d607d4df28
--- a/devices_v0_7/uart.yaml
+++ b/devices_v0_7/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin14_15
-  rx_pin: GPIO14
-  tx_pin: GPIO15
-  baud_rate: 9600
-  stop_bits: 1
Author	SHA1	Message	Date
pszafer	ace9718634	change to only esp as serial prefix	2024-05-27 21:31:27 +02:00
pszafer	206a1912f2	add serial_prefix to config	2024-05-27 20:32:25 +02:00
pszafer	8412fb6fe5	Move uart and modbus to main file	2024-05-23 20:11:00 +02:00
pszafer	1befa8554a	Switch dashboard import to latest branch	2024-05-22 19:37:04 +02:00
pszafer	3741466e05	fix fw	2024-05-22 17:03:31 +02:00
pszafer	501155c99e	fix ina L power	2024-05-22 16:59:20 +02:00
pszafer	866a2c99ea	Add Power measure to INA	2024-05-22 12:47:15 +02:00
pszafer	6b44f23693	fix serial no	2024-05-22 10:25:02 +02:00
pszafer	ac9c9d6ac5	dimmer serial no	2024-05-22 10:00:46 +02:00
pszafer	8733d0f625	add serial number	2024-05-22 09:59:52 +02:00
pszafer	9a5c78334d	fix INA to 10A	2024-05-22 09:59:44 +02:00
pszafer	28c60689c6	Dimmer output	2024-05-20 13:10:50 +02:00
pszafer	3ac8e38f75	move dimmer and buzzer to main dimmer file	2024-05-20 09:07:31 +02:00
pszafer	ea52b3d40e	fix channel naming	2024-05-19 22:35:02 +02:00
pszafer	f03b078855	fix tag ref	2024-05-19 22:32:51 +02:00
pszafer	f152ce0508	rename ina to ina219	2024-05-19 22:31:33 +02:00
pszafer	dce79eadf6	add dimmer config split into multiple files	2024-05-19 20:41:18 +02:00
pszafer	a36cac224a	Remove OTA password	2024-04-24 10:43:27 +02:00
pszafer	75b7cf5a0c	change versioning in project config	2024-04-11 13:05:53 +02:00
pszafer	10332236a9	replace lm75 with tp102	2024-04-11 12:57:27 +02:00
pszafer	22e8852a60	fix esp32 board	2024-04-10 22:05:22 +02:00
pszafer	ab51965605	fix naming 1.0.3	2024-04-10 09:15:09 +02:00
pszafer	ddc26dd2b1	fix v0.7 light and cover	2024-04-09 22:21:28 +02:00