v1.4.0

Merge pull request #17 from wedr0wycz/main
Corrected pcf inputs ids
2026-04-10 20:50:02 +02:00 · 2024-10-07 14:40:06 +02:00 · 2024-10-07 12:35:19 +02:00 · 2024-10-07 12:35:07 +02:00 · 2024-10-07 12:33:58 +02:00 · 2024-10-07 12:21:06 +02:00
40 changed files with 4106 additions and 110 deletions
--- a/boards/mosfet48_output.yaml
+++ b/boards/mosfet48_output.yaml
@@ -0,0 +1,431 @@
+output:
+  - platform: gpio
+    id: out_01
+    pin:
+      pcf8574: pcf_left
+      number: 7
+      mode:
+        output: true
+      inverted: true
+  - platform: gpio
+    id: out_02
+    pin:
+      pcf8574: pcf_left
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_03
+    pin:
+      pcf8574: pcf_left
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_04
+    pin:
+      pcf8574: pcf_left
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_05
+    pin:
+      pcf8574: pcf_left
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_06
+    pin:
+      pcf8574: pcf_left
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_07
+    pin:
+      pcf8574: pcf_left
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_08
+    pin:
+      pcf8574: pcf_left
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_09
+    pin:
+      pcf8574: pcf_middle
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_10
+    pin:
+      pcf8574: pcf_middle
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_11
+    pin:
+      pcf8574: pcf_middle
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_12
+    pin:
+      pcf8574: pcf_middle
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_13
+    pin:
+      pcf8574: pcf_middle
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_14
+    pin:
+      pcf8574: pcf_middle
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_15
+    pin:
+      pcf8574: pcf_middle
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_16
+    pin:
+      pcf8574: pcf_middle
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_17
+    pin:
+      pcf8574: pcf_right
+      number: 7
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_18
+    pin:
+      pcf8574: pcf_right
+      number: 6
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_19
+    pin:
+      pcf8574: pcf_right
+      number: 5
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_20
+    pin:
+      pcf8574: pcf_right
+      number: 4
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_21
+    pin:
+      pcf8574: pcf_right
+      number: 3
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_22
+    pin:
+      pcf8574: pcf_right
+      number: 2
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_23
+    pin:
+      pcf8574: pcf_right
+      number: 1
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_24
+    pin:
+      pcf8574: pcf_right
+      number: 0
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_25
+    pin:
+      pcf8574: pcf_left
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_26
+    pin:
+      pcf8574: pcf_left
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_27
+    pin:
+      pcf8574: pcf_left
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_28
+    pin:
+      pcf8574: pcf_left
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_29
+    pin:
+      pcf8574: pcf_left
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_30
+    pin:
+      pcf8574: pcf_left
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_31
+    pin:
+      pcf8574: pcf_left
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_32
+    pin:
+      pcf8574: pcf_left
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_33
+    pin:
+      pcf8574: pcf_middle
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_34
+    pin:
+      pcf8574: pcf_middle
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_35
+    pin:
+      pcf8574: pcf_middle
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_36
+    pin:
+      pcf8574: pcf_middle
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_37
+    pin:
+      pcf8574: pcf_middle
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_38
+    pin:
+      pcf8574: pcf_middle
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_39
+    pin:
+      pcf8574: pcf_middle
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_40
+    pin:
+      pcf8574: pcf_middle
+      number: 15
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_41
+    pin:
+      pcf8574: pcf_right
+      number: 8
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_42
+    pin:
+      pcf8574: pcf_right
+      number: 9
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_43
+    pin:
+      pcf8574: pcf_right
+      number: 10
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_44
+    pin:
+      pcf8574: pcf_right
+      number: 11
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_45
+    pin:
+      pcf8574: pcf_right
+      number: 12
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_46
+    pin:
+      pcf8574: pcf_right
+      number: 13
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_47
+    pin:
+      pcf8574: pcf_right
+      number: 14
+      mode:
+        output: true
+      inverted: true
+
+  - platform: gpio
+    id: out_48
+    pin:
+      pcf8574: pcf_right
+      number: 15
+      mode:
+        output: true
+      inverted: true
--- a/boneio-24x16_switches_v0_5-v0_6.yaml
+++ b/boneio-24x16_switches_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-24-sw-06
  friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
        'devices_v0_5-v0_6/pcf_with_mcp.yaml',
        'boards/24x16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -576,3 +578,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-24x16_switches_v0_7.yaml
+++ b/boneio-24x16_switches_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-24-sw-07
  friendly_name: 'BoneIO ESP 24x16 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,28 +24,29 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-24x16_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.2.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
-        'devices_v0_7/ina219.yaml',
-        'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf_with_mcp.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
        'boards/24x16_output.yaml',
-        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -572,3 +574,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_5-v0_6.yaml
+++ b/boneio-32x10_lights_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-l-06
  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,13 +42,13 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
  baud_rate: 0 #IMPORTANT FOR V0.5-V0.6 TO GET MODBUS WORKING
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -633,3 +635,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_7.yaml
+++ b/boneio-32x10_lights_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-l-07
  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,47 +24,30 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_7.yaml@latest
  import_full_config: true

-modbus:
-  send_wait_time: 200ms
-  uart_id: uart_pin14_15
-  id: mod_bus
-
-modbus_controller:
-  - id: sofarsolar
-    address: 0x09
-    modbus_id: mod_bus
-    setup_priority: -10
-    update_interval: 15s
-
 packages:
-  # extra_boneio_package:
-  #   url: github://boneIO-eu/esphome-packages
-  #   file: sofar-inverter-ktl.yaml
-  #   vars:
-  #     sofar_modbus_id: sofarsolar
-
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.2.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
-        'devices_v0_7/ina219.yaml',
-        'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
        'boards/32x10_output.yaml',
-        # 'devices_v0_7/one_wire.yaml',
-        'devices_v0_7/uart.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
      ]

 logger:
 api:
  reboot_timeout: 0s
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -647,3 +631,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_lights_v0_9.yaml
+++ b/boneio-32x10_lights_v0_9.yaml
@@ -0,0 +1,655 @@
+substitutions:
+  name: boneio-32-l-09
+  friendly_name: 'BoneIO ESP 32x10 Lights'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.32x10-lights
+    version: '0.9'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO17_out
+  phy_addr: 0
+  power_pin: GPIO12
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_lights_v0_9.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.2.0
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_9/display.yaml',
+        'devices_v0_9/i2c.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
+        'boards/32x10_output.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
+      ]
+
+logger:
+api:
+  reboot_timeout: 0s
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+light:
+  - platform: binary
+    name: 'Light 01'
+    output: out_01
+    id: light_01
+  - platform: binary
+    name: 'Light 02'
+    output: out_02
+    id: light_02
+  - platform: binary
+    name: 'Light 03'
+    output: out_03
+    id: light_03
+  - platform: binary
+    name: 'Light 04'
+    output: out_04
+    id: light_04
+  - platform: binary
+    name: 'Light 05'
+    output: out_05
+    id: light_05
+  - platform: binary
+    name: 'Light 06'
+    output: out_06
+    id: light_06
+  - platform: binary
+    name: 'Light 07'
+    output: out_07
+    id: light_07
+  - platform: binary
+    name: 'Light 08'
+    output: out_08
+    id: light_08
+  - platform: binary
+    name: 'Light 09'
+    output: out_09
+    id: light_09
+  - platform: binary
+    name: 'Light 10'
+    output: out_10
+    id: light_10
+  - platform: binary
+    name: 'Light 11'
+    output: out_11
+    id: light_11
+  - platform: binary
+    name: 'Light 12'
+    output: out_12
+    id: light_12
+  - platform: binary
+    name: 'Light 13'
+    output: out_13
+    id: light_13
+  - platform: binary
+    name: 'Light 14'
+    output: out_14
+    id: light_14
+  - platform: binary
+    name: 'Light 15'
+    output: out_15
+    id: light_15
+  - platform: binary
+    name: 'Light 16'
+    output: out_16
+    id: light_16
+  - platform: binary
+    name: 'Light 17'
+    output: out_17
+    id: light_17
+  - platform: binary
+    name: 'Light 18'
+    output: out_18
+    id: light_18
+  - platform: binary
+    name: 'Light 19'
+    output: out_19
+    id: light_19
+  - platform: binary
+    name: 'Light 20'
+    output: out_20
+    id: light_20
+  - platform: binary
+    name: 'Light 21'
+    output: out_21
+    id: light_21
+  - platform: binary
+    name: 'Light 22'
+    output: out_22
+    id: light_22
+  - platform: binary
+    name: 'Light 23'
+    output: out_23
+    id: light_23
+  - platform: binary
+    name: 'Light 24'
+    output: out_24
+    id: light_24
+  - platform: binary
+    name: 'Light 25'
+    output: out_25
+    id: light_25
+  - platform: binary
+    name: 'Light 26'
+    output: out_26
+    id: light_26
+  - platform: binary
+    name: 'Light 27'
+    output: out_27
+    id: light_27
+  - platform: binary
+    name: 'Light 28'
+    output: out_28
+    id: light_28
+  - platform: binary
+    name: 'Light 29'
+    output: out_29
+    id: light_29
+  - platform: binary
+    name: 'Light 30'
+    output: out_30
+    id: light_30
+  - platform: binary
+    name: 'Light 31'
+    output: out_31
+    id: light_31
+  - platform: binary
+    name: 'Light 32'
+    output: out_32
+    id: light_32
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_4.yaml
+++ b/boneio-32x10_switches_v0_4.yaml
@@ -0,0 +1,655 @@
+substitutions:
+  name: boneio-32-sw-04
+  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.32x10-switches
+    version: '0.4PP'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+  #use_address:
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_4.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.4.0
+    files: [
+        'devices/serial_no.yaml',
+        'devices_v0_4/display.yaml',
+        'devices_v0_4/i2c.yaml',
+        'devices_v0_4/ina219.yaml',
+        'devices_v0_4/lm75b.yaml',
+        'devices_v0_4/pcf.yaml',
+        'boards/32x10_output.yaml',
+        # 'devices_v0_4/time.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+ota:
+  - platform: esphome
+
+# disable web server - for testing only
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+switch:
+  - platform: output
+    name: 'Switch 01'
+    output: out_01
+    id: switch_01
+  - platform: output
+    name: 'Switch 02'
+    output: out_02
+    id: switch_02
+  - platform: output
+    name: 'Switch 03'
+    output: out_03
+    id: switch_03
+  - platform: output
+    name: 'Switch 04'
+    output: out_04
+    id: switch_04
+  - platform: output
+    name: 'Switch 05'
+    output: out_05
+    id: switch_05
+  - platform: output
+    name: 'Switch 06'
+    output: out_06
+    id: switch_06
+  - platform: output
+    name: 'Switch 07'
+    output: out_07
+    id: switch_07
+  - platform: output
+    name: 'Switch 08'
+    output: out_08
+    id: switch_08
+  - platform: output
+    name: 'Switch 09'
+    output: out_09
+    id: switch_09
+  - platform: output
+    name: 'Switch 10'
+    output: out_10
+    id: switch_10
+  - platform: output
+    name: 'Switch 11'
+    output: out_11
+    id: switch_11
+  - platform: output
+    name: 'Switch 12'
+    output: out_12
+    id: switch_12
+  - platform: output
+    name: 'Switch 13'
+    output: out_13
+    id: switch_13
+  - platform: output
+    name: 'Switch 14'
+    output: out_14
+    id: switch_14
+  - platform: output
+    name: 'Switch 15'
+    output: out_15
+    id: switch_15
+  - platform: output
+    name: 'Switch 16'
+    output: out_16
+    id: switch_16
+  - platform: output
+    name: 'Switch 17'
+    output: out_17
+    id: switch_17
+  - platform: output
+    name: 'Switch 18'
+    output: out_18
+    id: switch_18
+  - platform: output
+    name: 'Switch 19'
+    output: out_19
+    id: switch_19
+  - platform: output
+    name: 'Switch 20'
+    output: out_20
+    id: switch_20
+  - platform: output
+    name: 'Switch 21'
+    output: out_21
+    id: switch_21
+  - platform: output
+    name: 'Switch 22'
+    output: out_22
+    id: switch_22
+  - platform: output
+    name: 'Switch 23'
+    output: out_23
+    id: switch_23
+  - platform: output
+    name: 'Switch 24'
+    output: out_24
+    id: switch_24
+  - platform: output
+    name: 'Switch 25'
+    output: out_25
+    id: switch_25
+  - platform: output
+    name: 'Switch 26'
+    output: out_26
+    id: switch_26
+  - platform: output
+    name: 'Switch 27'
+    output: out_27
+    id: switch_27
+  - platform: output
+    name: 'Switch 28'
+    output: out_28
+    id: switch_28
+  - platform: output
+    name: 'Switch 29'
+    output: out_29
+    id: switch_29
+  - platform: output
+    name: 'Switch 30'
+    output: out_30
+    id: switch_30
+  - platform: output
+    name: 'Switch 31'
+    output: out_31
+    id: switch_31
+  - platform: output
+    name: 'Switch 32'
+    output: out_32
+    id: switch_32
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 7
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_1to16
+      number: 15
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 7
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_17to32
+      number: 15
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      number: GPIO33
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      number: GPIO17
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      number: GPIO12
+      mode:
+        input: true
+        pullup: true
+      inverted: false
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
+
--- a/boneio-32x10_switches_v0_5-v0_6.yaml
+++ b/boneio-32x10_switches_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-sw-06
  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/32x10_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -632,3 +634,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-32x10_switches_v0_7.yaml
+++ b/boneio-32x10_switches_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-32-sw-07
  friendly_name: 'BoneIO ESP 32x10 Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,28 +24,29 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-32x10_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
-        'devices_v0_7/ina219.yaml',
-        'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
        'boards/32x10_output.yaml',
-        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -628,3 +630,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-8x10A_v0_1.yaml
+++ b/boneio-8x10A_v0_1.yaml
@@ -0,0 +1,208 @@
+substitutions:
+  name: boneio-8-s-01
+  friendly_name: 'BoneIO ESP 8x10A Switches'
+  serial_prefix: 'espm' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.8_10-switches
+    version: '0.1'
+
+esp32:
+  board: esp32dev
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-8x10A_v0_1.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.4.0
+    files:
+      [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices/dimmer_i2c.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+      ]
+
+logger:
+api:
+  reboot_timeout: 0s
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+mcp23017:
+  - id: 'mcp1'
+    address: 0x20
+
+# Individual outputs
+switch:
+  - platform: gpio
+    name: 'OUT 1'
+    id: out_01
+    pin:
+      mcp23xxx: mcp1
+      number: 8
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 2'
+    id: out_02
+    pin:
+      mcp23xxx: mcp1
+      number: 9
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 3'
+    id: out_03
+    pin:
+      mcp23xxx: mcp1
+      number: 10
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 4'
+    id: out_04
+    pin:
+      mcp23xxx: mcp1
+      number: 11
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 5'
+    id: out_05
+    pin:
+      mcp23xxx: mcp1
+      number: 12
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 6'
+    id: out_06
+    pin:
+      mcp23xxx: mcp1
+      number: 13
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 7'
+    id: out_07
+    pin:
+      mcp23xxx: mcp1
+      number: 14
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: 'OUT 8'
+    id: out_08
+    pin:
+      mcp23xxx: mcp1
+      number: 15
+      mode:
+        output: true
+      inverted: false
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN 01'
+    id: in_01
+    pin:
+      mcp23xxx: mcp1
+      number: 0
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 02'
+    id: in_02
+    pin:
+      mcp23xxx: mcp1
+      number: 1
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 03'
+    id: in_03
+    pin:
+      mcp23xxx: mcp1
+      number: 2
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 04'
+    id: in_04
+    pin:
+      mcp23xxx: mcp1
+      number: 3
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 05'
+    id: in_05
+    pin:
+      mcp23xxx: mcp1
+      number: 4
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 06'
+    id: in_06
+    pin:
+      mcp23xxx: mcp1
+      number: 5
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 07'
+    id: in_07
+    pin:
+      mcp23xxx: mcp1
+      number: 6
+      mode:
+        input: true
+      inverted: false
+  - platform: gpio
+    name: 'IN 08'
+    id: in_08
+    pin:
+      mcp23xxx: mcp1
+      number: 7
+      mode:
+        input: true
+      inverted: false
--- a/boneio-cover_mix_lights_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_lights_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-l-06
  friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -737,3 +739,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_lights_v0_7.yaml
+++ b/boneio-cover_mix_lights_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-l-07
  friendly_name: 'BoneIO ESP Cover Mix Lights'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,28 +24,30 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_lights_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.2.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
-        'devices_v0_7/ina219.yaml',
-        'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
+        'boards/32x10_output.yaml',
        'boards/8_covers_16_output.yaml',
-        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -733,3 +736,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_5-v0_6.yaml
+++ b/boneio-cover_mix_switches_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-sw-06
  friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/8_covers_16_output.yaml',
        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -736,3 +738,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_mix_switches_v0_7.yaml
+++ b/boneio-cover_mix_switches_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-cm-sw-07
  friendly_name: 'BoneIO ESP Cover Mix Switches'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,28 +24,29 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_mix_switches_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.2.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
-        'devices_v0_7/ina219.yaml',
-        'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
        'boards/8_covers_16_output.yaml',
-        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -733,3 +735,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_5-v0_6.yaml
+++ b/boneio-cover_v0_5-v0_6.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-c-06
  friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,15 +24,16 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_5-v0_6.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.4.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_5-v0_6/display.yaml',
        'devices_v0_5-v0_6/time.yaml',
        'devices_v0_5-v0_6/i2c.yaml',
@@ -40,12 +42,12 @@ packages:
        'devices_v0_5-v0_6/pcf.yaml',
        'boards/16_cover_pcf.yaml',
        # 'devices_v0_5-v0_6/one_wire.yaml',
-        # 'devices_v0_5-v0_6/uart.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -839,3 +841,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin3_1
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-cover_v0_7.yaml
+++ b/boneio-cover_v0_7.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-c-07
  friendly_name: 'BoneIO ESP Cover'
+  serial_prefix: 'esp' #Don't change it.

 esphome:
  name: '${name}'
@@ -23,28 +24,29 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@v1.0.5
+  package_import_url: github://boneIO-eu/esphome/boneio-cover_v0_7.yaml@latest
  import_full_config: true

 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.5
+    ref: v1.2.0
    files: [
        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
        'devices_v0_7/display.yaml',
        'devices_v0_7/i2c.yaml',
-        'devices_v0_7/ina219.yaml',
-        'devices_v0_7/lm75b.yaml',
-        'devices_v0_7/pcf.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf.yaml',
        'boards/16_cover_pcf.yaml',
-        # 'devices_v0_7/one_wire.yaml',
-        # 'devices_v0_7/uart.yaml',
+        # 'devices_v0_7-v0_9/one_wire.yaml',
      ]

 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -835,3 +837,25 @@ binary_sensor:
      mode:
        input: true
      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-dimmer_2rgbw-v0_3.yaml
+++ b/boneio-dimmer_2rgbw-v0_3.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-dr-rgbw-03
  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.

 esphome:
  name: '${name}'
@@ -20,10 +21,10 @@ external_components:
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.12
+    ref: v1.4.0
    files:
      [
-        'devices/dimmer_serial_no.yaml',
+        'devices/serial_no.yaml',
        'devices/dimmer_i2c.yaml',
        'devices/dimmer_ina219.yaml',
      ]
@@ -38,7 +39,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@v1.0.12
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_2rgbw-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -48,6 +49,7 @@ pcf8574:
 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
--- a/boneio-dimmer_4cct-v0_3.yaml
+++ b/boneio-dimmer_4cct-v0_3.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-dr-4cct-03
  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.

 esphome:
  name: '${name}'
@@ -20,10 +21,10 @@ external_components:
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.12
+    ref: v1.4.0
    files:
      [
-        'devices/dimmer_serial_no.yaml',
+        'devices/serial_no.yaml',
        'devices/dimmer_i2c.yaml',
        'devices/dimmer_ina219.yaml',
      ]
@@ -38,7 +39,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@v1.0.12
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_4cct-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -48,6 +49,7 @@ pcf8574:
 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
@@ -191,15 +193,15 @@ light:

  - platform: cwww
    name: 'CHR_01_02'
-    cold_white: chl01
-    warm_white: chl02
+    cold_white: chr01
+    warm_white: chr02
    cold_white_color_temperature: 6536 K
    warm_white_color_temperature: 2000 K

  - platform: cwww
    name: 'CHR_03_04'
-    cold_white: chl03
-    warm_white: chl04
+    cold_white: chr03
+    warm_white: chr04
    cold_white_color_temperature: 6536 K
    warm_white_color_temperature: 2000 K

--- a/boneio-dimmer_8ch-v0_3.yaml
+++ b/boneio-dimmer_8ch-v0_3.yaml
@@ -1,6 +1,7 @@
 substitutions:
  name: boneio-dr-8ch-03
  friendly_name: 'BoneIO Dimmer LED'
+  serial_prefix: 'dim' #Don't change it.

 esphome:
  name: '${name}'
@@ -20,10 +21,10 @@ external_components:
 packages:
  internals_packages:
    url: https://github.com/boneIO-eu/esphome
-    ref: v1.0.12
+    ref: v1.4.0
    files:
      [
-        'devices/dimmer_serial_no.yaml',
+        'devices/serial_no.yaml',
        'devices/dimmer_i2c.yaml',
        'devices/dimmer_ina219.yaml',
      ]
@@ -38,7 +39,7 @@ ethernet:
  power_pin: GPIO16

 dashboard_import:
-  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@v1.0.12
+  package_import_url: github://boneIO-eu/esphome/boneio-dimmer_8ch-v0_3.yaml@latest
  import_full_config: true

 pcf8574:
@@ -48,6 +49,7 @@ pcf8574:
 logger:
 api:
 ota:
+  platform: esphome

 web_server:
  port: 80
--- a/boneio-mosfet48_lights_v0_7.yaml
+++ b/boneio-mosfet48_lights_v0_7.yaml
@@ -0,0 +1,719 @@
+substitutions:
+  name: boneio-48-l-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Lights'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_lights_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.4.0
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+  reboot_timeout: 0s
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+light:
+  - platform: binary
+    name: 'Light 01'
+    output: out_01
+    id: light_01
+  - platform: binary
+    name: 'Light 02'
+    output: out_02
+    id: light_02
+  - platform: binary
+    name: 'Light 03'
+    output: out_03
+    id: light_03
+  - platform: binary
+    name: 'Light 04'
+    output: out_04
+    id: light_04
+  - platform: binary
+    name: 'Light 05'
+    output: out_05
+    id: light_05
+  - platform: binary
+    name: 'Light 06'
+    output: out_06
+    id: light_06
+  - platform: binary
+    name: 'Light 07'
+    output: out_07
+    id: light_07
+  - platform: binary
+    name: 'Light 08'
+    output: out_08
+    id: light_08
+  - platform: binary
+    name: 'Light 09'
+    output: out_09
+    id: light_09
+  - platform: binary
+    name: 'Light 10'
+    output: out_10
+    id: light_10
+  - platform: binary
+    name: 'Light 11'
+    output: out_11
+    id: light_11
+  - platform: binary
+    name: 'Light 12'
+    output: out_12
+    id: light_12
+  - platform: binary
+    name: 'Light 13'
+    output: out_13
+    id: light_13
+  - platform: binary
+    name: 'Light 14'
+    output: out_14
+    id: light_14
+  - platform: binary
+    name: 'Light 15'
+    output: out_15
+    id: light_15
+  - platform: binary
+    name: 'Light 16'
+    output: out_16
+    id: light_16
+  - platform: binary
+    name: 'Light 17'
+    output: out_17
+    id: light_17
+  - platform: binary
+    name: 'Light 18'
+    output: out_18
+    id: light_18
+  - platform: binary
+    name: 'Light 19'
+    output: out_19
+    id: light_19
+  - platform: binary
+    name: 'Light 20'
+    output: out_20
+    id: light_20
+  - platform: binary
+    name: 'Light 21'
+    output: out_21
+    id: light_21
+  - platform: binary
+    name: 'Light 22'
+    output: out_22
+    id: light_22
+  - platform: binary
+    name: 'Light 23'
+    output: out_23
+    id: light_23
+  - platform: binary
+    name: 'Light 24'
+    output: out_24
+    id: light_24
+  - platform: binary
+    name: 'Light 25'
+    output: out_25
+    id: light_25
+  - platform: binary
+    name: 'Light 26'
+    output: out_26
+    id: light_26
+  - platform: binary
+    name: 'Light 27'
+    output: out_27
+    id: light_27
+  - platform: binary
+    name: 'Light 28'
+    output: out_28
+    id: light_28
+  - platform: binary
+    name: 'Light 29'
+    output: out_29
+    id: light_29
+  - platform: binary
+    name: 'Light 30'
+    output: out_30
+    id: light_30
+  - platform: binary
+    name: 'Light 31'
+    output: out_31
+    id: light_31
+  - platform: binary
+    name: 'Light 32'
+    output: out_32
+    id: light_32
+  - platform: binary
+    name: 'Light 33'
+    output: out_33
+    id: light_33
+  - platform: binary
+    name: 'Light 34'
+    output: out_34
+    id: light_34
+  - platform: binary
+    name: 'Light 35'
+    output: out_35
+    id: light_35
+  - platform: binary
+    name: 'Light 36'
+    output: out_36
+    id: light_36
+  - platform: binary
+    name: 'Light 37'
+    output: out_37
+    id: light_37
+  - platform: binary
+    name: 'Light 38'
+    output: out_38
+    id: light_38
+  - platform: binary
+    name: 'Light 39'
+    output: out_39
+    id: light_39
+  - platform: binary
+    name: 'Light 40'
+    output: out_40
+    id: light_40
+  - platform: binary
+    name: 'Light 41'
+    output: out_41
+    id: light_41
+  - platform: binary
+    name: 'Light 42'
+    output: out_42
+    id: light_42
+  - platform: binary
+    name: 'Light 43'
+    output: out_43
+    id: light_43
+  - platform: binary
+    name: 'Light 44'
+    output: out_44
+    id: light_44
+  - platform: binary
+    name: 'Light 45'
+    output: out_45
+    id: light_45
+  - platform: binary
+    name: 'Light 46'
+    output: out_46
+    id: light_46
+  - platform: binary
+    name: 'Light 47'
+    output: out_47
+    id: light_47
+  - platform: binary
+    name: 'Light 48'
+    output: out_48
+    id: light_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - light.toggle: light_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/boneio-mosfet48_switches_v0_7.yaml
+++ b/boneio-mosfet48_switches_v0_7.yaml
@@ -0,0 +1,718 @@
+substitutions:
+  name: boneio-48-sw-07
+  friendly_name: 'BoneIO ESP Mosfet 48 Switches'
+  serial_prefix: 'esp' #Don't change it.
+
+esphome:
+  name: '${name}'
+  friendly_name: '${friendly_name}'
+  name_add_mac_suffix: true
+  project:
+    name: boneio.mosfet48-lights
+    version: '0.7'
+
+esp32:
+  board: nodemcu-32s
+
+ethernet:
+  id: eth
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO0_IN
+  phy_addr: 1
+  power_pin: GPIO16
+
+dashboard_import:
+  package_import_url: github://boneIO-eu/esphome/boneio-mosfet48_switches_v0_7.yaml@latest
+  import_full_config: true
+
+packages:
+  internals_packages:
+    url: https://github.com/boneIO-eu/esphome
+    ref: v1.4.0
+    files: [
+        'devices/buzzer.yaml',
+        'devices/serial_no.yaml',
+        'devices_v0_7/display.yaml',
+        'devices_v0_7/i2c.yaml',
+        'devices_v0_7-v0_9/ina219.yaml',
+        'devices_v0_7-v0_9/lm75b.yaml',
+        'devices_v0_7-v0_9/pcf_mosfet.yaml',
+        'boards/mosfet48_output.yaml',
+        # 'devices_v0_7/one_wire.yaml',
+      ]
+
+logger:
+api:
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+time:
+  - platform: homeassistant
+    timezone: Europe/Warsaw
+    id: homeassistant_time
+
+switch:
+  - platform: output
+    name: 'Switch 01'
+    output: out_01
+    id: switch_01
+  - platform: output
+    name: 'Switch 02'
+    output: out_02
+    id: switch_02
+  - platform: output
+    name: 'Switch 03'
+    output: out_03
+    id: switch_03
+  - platform: output
+    name: 'Switch 04'
+    output: out_04
+    id: switch_04
+  - platform: output
+    name: 'Switch 05'
+    output: out_05
+    id: switch_05
+  - platform: output
+    name: 'Switch 06'
+    output: out_06
+    id: switch_06
+  - platform: output
+    name: 'Switch 07'
+    output: out_07
+    id: switch_07
+  - platform: output
+    name: 'Switch 08'
+    output: out_08
+    id: switch_08
+  - platform: output
+    name: 'Switch 09'
+    output: out_09
+    id: switch_09
+  - platform: output
+    name: 'Switch 10'
+    output: out_10
+    id: switch_10
+  - platform: output
+    name: 'Switch 11'
+    output: out_11
+    id: switch_11
+  - platform: output
+    name: 'Switch 12'
+    output: out_12
+    id: switch_12
+  - platform: output
+    name: 'Switch 13'
+    output: out_13
+    id: switch_13
+  - platform: output
+    name: 'Switch 14'
+    output: out_14
+    id: switch_14
+  - platform: output
+    name: 'Switch 15'
+    output: out_15
+    id: switch_15
+  - platform: output
+    name: 'Switch 16'
+    output: out_16
+    id: switch_16
+  - platform: output
+    name: 'Switch 17'
+    output: out_17
+    id: switch_17
+  - platform: output
+    name: 'Switch 18'
+    output: out_18
+    id: switch_18
+  - platform: output
+    name: 'Switch 19'
+    output: out_19
+    id: switch_19
+  - platform: output
+    name: 'Switch 20'
+    output: out_20
+    id: switch_20
+  - platform: output
+    name: 'Switch 21'
+    output: out_21
+    id: switch_21
+  - platform: output
+    name: 'Switch 22'
+    output: out_22
+    id: switch_22
+  - platform: output
+    name: 'Switch 23'
+    output: out_23
+    id: switch_23
+  - platform: output
+    name: 'Switch 24'
+    output: out_24
+    id: switch_24
+  - platform: output
+    name: 'Switch 25'
+    output: out_25
+    id: switch_25
+  - platform: output
+    name: 'Switch 26'
+    output: out_26
+    id: switch_26
+  - platform: output
+    name: 'Switch 27'
+    output: out_27
+    id: switch_27
+  - platform: output
+    name: 'Switch 28'
+    output: out_28
+    id: switch_28
+  - platform: output
+    name: 'Switch 29'
+    output: out_29
+    id: switch_29
+  - platform: output
+    name: 'Switch 30'
+    output: out_30
+    id: switch_30
+  - platform: output
+    name: 'Switch 31'
+    output: out_31
+    id: switch_31
+  - platform: output
+    name: 'Switch 32'
+    output: out_32
+    id: switch_32
+  - platform: output
+    name: 'Switch 33'
+    output: out_33
+    id: switch_33
+  - platform: output
+    name: 'Switch 34'
+    output: out_34
+    id: switch_34
+  - platform: output
+    name: 'Switch 35'
+    output: out_35
+    id: switch_35
+  - platform: output
+    name: 'Switch 36'
+    output: out_36
+    id: switch_36
+  - platform: output
+    name: 'Switch 37'
+    output: out_37
+    id: switch_37
+  - platform: output
+    name: 'Switch 38'
+    output: out_38
+    id: switch_38
+  - platform: output
+    name: 'Switch 39'
+    output: out_39
+    id: switch_39
+  - platform: output
+    name: 'Switch 40'
+    output: out_40
+    id: switch_40
+  - platform: output
+    name: 'Switch 41'
+    output: out_41
+    id: switch_41
+  - platform: output
+    name: 'Switch 42'
+    output: out_42
+    id: switch_42
+  - platform: output
+    name: 'Switch 43'
+    output: out_43
+    id: switch_43
+  - platform: output
+    name: 'Switch 44'
+    output: out_44
+    id: switch_44
+  - platform: output
+    name: 'Switch 45'
+    output: out_45
+    id: switch_45
+  - platform: output
+    name: 'Switch 46'
+    output: out_46
+    id: switch_46
+  - platform: output
+    name: 'Switch 47'
+    output: out_47
+    id: switch_47
+  - platform: output
+    name: 'Switch 48'
+    output: out_48
+    id: switch_48
+
+binary_sensor:
+  - platform: gpio
+    name: 'IN_01'
+    id: in_01
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_01
+
+  - platform: gpio
+    name: 'IN_02'
+    id: in_02
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_02
+
+  - platform: gpio
+    name: 'IN_03'
+    id: in_03
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_03
+
+  - platform: gpio
+    name: 'IN_04'
+    id: in_04
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_04
+
+  - platform: gpio
+    name: 'IN_05'
+    id: in_05
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_05
+
+  - platform: gpio
+    name: 'IN_06'
+    id: in_06
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_06
+
+  - platform: gpio
+    name: 'IN_07'
+    id: in_07
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_07
+
+  - platform: gpio
+    name: 'IN_08'
+    id: in_08
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_08
+
+  - platform: gpio
+    name: 'IN_09'
+    id: in_09
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_09
+
+  - platform: gpio
+    name: 'IN_10'
+    id: in_10
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_10
+
+  - platform: gpio
+    name: 'IN_11'
+    id: in_11
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_11
+
+  - platform: gpio
+    name: 'IN_12'
+    id: in_12
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_12
+
+  - platform: gpio
+    name: 'IN_13'
+    id: in_13
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_13
+
+  - platform: gpio
+    name: 'IN_14'
+    id: in_14
+    pin:
+      pcf8574: pcf_inputs_1to14
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_14
+
+  - platform: gpio
+    name: 'IN_15'
+    id: in_15
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 6
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_15
+
+  - platform: gpio
+    name: 'IN_16'
+    id: in_16
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 5
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_16
+
+  - platform: gpio
+    name: 'IN_17'
+    id: in_17
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 4
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_17
+
+  - platform: gpio
+    name: 'IN_18'
+    id: in_18
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_18
+
+  - platform: gpio
+    name: 'IN_19'
+    id: in_19
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_19
+
+  - platform: gpio
+    name: 'IN_20'
+    id: in_20
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_20
+
+  - platform: gpio
+    name: 'IN_21'
+    id: in_21
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_21
+
+  - platform: gpio
+    name: 'IN_22'
+    id: in_22
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 8
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_22
+
+  - platform: gpio
+    name: 'IN_23'
+    id: in_23
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 9
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_23
+
+  - platform: gpio
+    name: 'IN_24'
+    id: in_24
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 10
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_24
+
+  - platform: gpio
+    name: 'IN_25'
+    id: in_25
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 11
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_25
+
+  - platform: gpio
+    name: 'IN_26'
+    id: in_26
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 12
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_26
+
+  - platform: gpio
+    name: 'IN_27'
+    id: in_27
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 13
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_27
+
+  - platform: gpio
+    name: 'IN_28'
+    id: in_28
+    pin:
+      pcf8574: pcf_inputs_15to28
+      number: 14
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_28
+
+  - platform: gpio
+    name: 'IN_29'
+    id: in_29
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 0
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_29
+
+  - platform: gpio
+    name: 'IN_30'
+    id: in_30
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 1
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_30
+
+  - platform: gpio
+    name: 'IN_31'
+    id: in_31
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 2
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_31
+
+  - platform: gpio
+    name: 'IN_32'
+    id: in_32
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 3
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        - switch.toggle: switch_32
+
+  - platform: gpio
+    name: 'IN_33'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 4
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_34'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 5
+      mode:
+        input: true
+      inverted: true
+
+  - platform: gpio
+    name: 'IN_35'
+    pin:
+      pcf8574: pcf_inputs_28to35_menu
+      number: 6
+      mode:
+        input: true
+      inverted: true
+######################
+### MODBUS SECTION ###
+######################
+# UNCOMMENT BELOW TO USE MODBUS
+# uart:
+#   id: uart_pin14_15
+#   rx_pin: GPIO14
+#   tx_pin: GPIO15
+#   baud_rate: 9600
+#   stop_bits: 1
+
+# modbus:
+#   send_wait_time: 200ms
+#   uart_id: uart_pin14_15
+#   id: boneio_modbus
+
+# modbus_controller:
+#   - id: YOURDEVICE ID
+#     address: 0x09
+#     modbus_id: mod_bus
+#     setup_priority: -10
+#     update_interval: 60s
--- a/create_firmware.py
+++ b/create_firmware.py
@@ -55,7 +55,7 @@ for file in glob.glob("*.yaml"):
    if not filename:
        print("No file found.")
        break
-    firmware_path = f"{cwd}/.esphome/build/{filename}/.pioenvs/{filename}/firmware-factory.bin"
+    firmware_path = f"{cwd}/.esphome/build/{filename}/.pioenvs/{filename}/firmware.factory.bin"
    print("CWD", cwd)
    subprocess.run(
        f'docker run --rm -p 6052:6052 -v "{cwd}":/config -it ghcr.io/esphome/esphome compile {file}',
--- a/devices/dimmer_ina219.yaml
+++ b/devices/dimmer_ina219.yaml
@@ -6,7 +6,7 @@ sensor:
      name: 'VDDL Supply'
      entity_category: diagnostic
    power:
-      name: 'VDDR Power'
+      name: 'VDDL Power'
      entity_category: diagnostic
    current:
      name: 'VDDL Current'
--- a/devices/dimmer_serial_no.yaml
+++ b/devices/dimmer_serial_no.yaml
@@ -3,7 +3,7 @@ text_sensor:
    name: 'Serial No.'
    lambda: |-
      std::string mac = get_mac_address();
-      return "dim" + mac.erase(0, mac.length()/2);
+      return to_string("${serial_prefix}") + mac.erase(0, mac.length()/2);
    icon: mdi:expansion-card-variant
    entity_category: diagnostic
-    update_interval: 10min
+    update_interval: 60min
--- a/devices_v0_4/display.yaml
+++ b/devices_v0_4/display.yaml
@@ -0,0 +1,131 @@
+#i2c  address: 0x3C input oled
+sensor:
+  - platform: uptime
+    id: wt32_uptime_seconds
+    update_interval: 60s
+    entity_category: diagnostic
+    on_raw_value:
+      then:
+        - text_sensor.template.publish:
+            id: wt32_uptime
+            state: !lambda |-
+              int seconds = round(id(wt32_uptime_seconds).raw_state);
+              int days = seconds / (24 * 3600);
+              seconds = seconds % (24 * 3600);
+              int hours = seconds / 3600;
+              seconds = seconds % 3600;
+              int minutes = seconds /  60;
+              return (
+                (days ? to_string(days) + "d " : "") +
+                (hours ? to_string(hours) + "h " : "") +
+                (to_string(minutes) + "m")
+              ).c_str();
+
+text_sensor:
+  - platform: template
+    name: Uptime
+    id: wt32_uptime
+    entity_category: diagnostic
+    icon: mdi:clock-start
+  - platform: template
+    name: 'IP Address'
+    id: ip_address
+    entity_category: diagnostic
+    icon: 'mdi:ip-network'
+    lambda: |-
+      return id(eth).get_ip_addresses().empty() ? "Unset" : id(eth).get_ip_addresses()[0].str();
+    update_interval: 60s
+
+script:
+  - id: screensaver_script
+    # screensaver script, turn on screensaver after 30 seconds, restart counter each time when invoked
+    mode: restart
+    then:
+      # set the time after which the screensaver will be activated
+      - delay: 30s
+      - display.page.show: screensaver
+      - component.update: oled_display
+
+esphome:
+  on_boot:
+    priority: 0
+    then:
+      - display.page.show: first_page
+      - component.update: ip_address
+      - component.update: oled_display
+      - script.execute: screensaver_script
+
+binary_sensor:
+  - platform: gpio
+    entity_category: config
+    id: boneIO_button
+    pin:
+      number: GPIO4
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    on_press:
+      then:
+        # woke up when on the screensaver, as well do not include the logo page and screensaver in a loop when pushing a button
+        - if:
+            condition:
+          # on the last page go to the first page skipping the screensaver and logo page
+              display.is_displaying_page: last_page
+            then:
+              - display.page.show: first_page
+              - component.update: oled_display
+            else:
+              - if:
+                  condition:
+                    # on the screensaver, show the logo for a while and display the first page
+                    display.is_displaying_page: screensaver
+                  then:
+                    - display.page.show: first_page
+                    - component.update: oled_display
+                  else:
+                    # not the last page and screensaver go to the next page
+                    - display.page.show_next: oled_display
+                    - component.update: oled_display
+          # restart screensaver script
+        - script.execute: screensaver_script
+
+display:
+  - platform: ssd1306_i2c
+    id: oled_display
+    model: "SH1106 128x64"
+    address: 0x3C
+    contrast: 0.5
+    pages:
+      - id: first_page
+        lambda: |-
+          it.rectangle(0, 0, 126, 15);
+          it.printf(64,11, id(size_10), TextAlign::BASELINE_CENTER, "bone IO");
+          it.printf(4, 37, id(size_10), TextAlign::BASELINE_LEFT ,"IP addr:");
+          it.printf(124, 37, id(size_10), TextAlign::BASELINE_RIGHT ,"%s", id(ip_address).state.c_str());
+          it.printf(4, 49, id(size_10), TextAlign::BASELINE_LEFT ,"Uptime:");
+          it.printf(124, 49, id(size_10), TextAlign::BASELINE_RIGHT ,"%s", id(wt32_uptime).state.c_str());
+          it.printf(4, 61, id(size_10), TextAlign::BASELINE_LEFT ,"Temperature:");
+          it.printf(124, 61, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2f°C", id(boneIO_temp).state);
+      # additional pages should be defined between the first and last page
+      - id: last_page
+        lambda: |-
+          it.rectangle(0, 0, 126, 15);
+          it.printf(64,11, id(size_10), TextAlign::BASELINE_CENTER, "bone IO");
+          it.printf(4, 25, id(size_10), TextAlign::BASELINE_LEFT ,"Current:");
+          it.printf(124, 25, id(size_10), TextAlign::BASELINE_RIGHT ,"%.3fA", id(ina_current).state);
+          it.printf(4, 37, id(size_10), TextAlign::BASELINE_LEFT ,"Power:");
+          it.printf(124, 37, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2fW", id(ina_power).state);
+          it.printf(4, 49, id(size_10), TextAlign::BASELINE_LEFT ,"Bus Volt:");
+          it.printf(124, 49, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_bus_voltage).state);
+          it.printf(4, 61, id(size_10), TextAlign::BASELINE_LEFT ,"Shunt Volt:");
+          it.printf(124, 61, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_shunt_voltage).state);
+      - id: screensaver
+        lambda: |-
+          it.fill(COLOR_OFF);
+
+font:
+  - file: 'gfonts://Ubuntu'
+    id: size_10
+    size: 10
+
--- a/devices_v0_4/i2c.yaml
+++ b/devices_v0_4/i2c.yaml
@@ -0,0 +1,6 @@
+i2c:
+  - id: i2c_bus
+    sda: GPIO14
+    scl: GPIO15
+    scan: True
+    frequency: 400kHz
--- a/devices_v0_4/ina219.yaml
+++ b/devices_v0_4/ina219.yaml
--- a/devices_v0_4/lm75b.yaml
+++ b/devices_v0_4/lm75b.yaml
--- a/devices_v0_4/pcf.yaml
+++ b/devices_v0_4/pcf.yaml
@@ -0,0 +1,13 @@
+pcf8574:
+  - id: 'pcf_right'
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_left'
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_1to16'
+    address: 0x26
+    pcf8575: true
+  - id: 'pcf_inputs_17to32'
+    address: 0x27
+    pcf8575: true
--- a/devices_v0_4/time.yaml
+++ b/devices_v0_4/time.yaml
@@ -0,0 +1,3 @@
+time:
+  - platform: ds1307
+    id: ds1307_time
--- a/devices_v0_5-v0_6/uart.yaml
+++ b/devices_v0_5-v0_6/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin3_1
-  rx_pin: GPIO3
-  tx_pin: GPIO1
-  baud_rate: 9600
-  stop_bits: 1
--- a/devices_v0_7-v0_9/ina219.yaml
+++ b/devices_v0_7-v0_9/ina219.yaml
@@ -0,0 +1,20 @@
+sensor:
+  # Module power consmption
+  - platform: ina219
+    address: 0x40
+    shunt_resistance: 0.1 ohm
+    current:
+      id: ina_current
+      name: 'INA219 Current'
+    power:
+      id: ina_power
+      name: 'INA219 Power'
+    bus_voltage:
+      id: ina_bus_voltage
+      name: 'INA219 Bus Voltage'
+    shunt_voltage:
+      id: ina_shunt_voltage
+      name: 'INA219 Shunt Voltage'
+    max_voltage: 32.0V
+    max_current: 3.2A
+    update_interval: 30s
--- a/devices_v0_7-v0_9/lm75b.yaml
+++ b/devices_v0_7-v0_9/lm75b.yaml
@@ -0,0 +1,12 @@
+#i2c address: 0x48 output lm75b temp
+#LM75B
+external_components:
+  - source: github://boneIO-eu/esphome-LM75@main #Original source and thank you note for BTomala https://github.com/boneIO-eu/esphome-lm75
+    components: [lm75]
+
+sensor:
+  # Lower board temperature
+  - platform: lm75
+    id: boneIO_temp
+    name: 'LM75B Temperature'
+    update_interval: 30s
--- a/devices_v0_7-v0_9/one_wire.yaml
+++ b/devices_v0_7-v0_9/one_wire.yaml
@@ -1,6 +1,6 @@
-dallas:
- pin: GPIO32
-
+one_wire:
+  - platform: gpio
+    pin: GPIO32
 # sensor:
 #   - platform: dallas
 #     address: 0x283c01d607d4df28
--- a/devices_v0_7-v0_9/pcf.yaml
+++ b/devices_v0_7-v0_9/pcf.yaml
--- a/devices_v0_7-v0_9/pcf_mosfet.yaml
+++ b/devices_v0_7-v0_9/pcf_mosfet.yaml
@@ -0,0 +1,25 @@
+pcf8574:
+  - id: 'pcf_inputs_1to14'
+    i2c_id: i2c_bus
+    address: 0x20
+    pcf8575: true
+  - id: 'pcf_inputs_15to28'
+    i2c_id: i2c_bus
+    address: 0x21
+    pcf8575: true
+  - id: 'pcf_inputs_28to35_menu'
+    i2c_id: i2c_bus
+    address: 0x22
+    pcf8575: false
+  - id: 'pcf_left'
+    address: 0x23
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_middle'
+    address: 0x24
+    pcf8575: true
+    i2c_id: i2c_bus
+  - id: 'pcf_right'
+    address: 0x25
+    pcf8575: true
+    i2c_id: i2c_bus
--- a/devices_v0_7-v0_9/pcf_with_mcp.yaml
+++ b/devices_v0_7-v0_9/pcf_with_mcp.yaml
--- a/devices_v0_7/uart.yaml
+++ b/devices_v0_7/uart.yaml
@@ -1,6 +0,0 @@
-uart:
-  id: uart_pin14_15
-  rx_pin: GPIO14
-  tx_pin: GPIO15
-  baud_rate: 9600
-  stop_bits: 1
--- a/devices_v0_9/display.yaml
+++ b/devices_v0_9/display.yaml
@@ -0,0 +1,129 @@
+#i2c  address: 0x3C input oled
+sensor:
+  - platform: uptime
+    id: wt32_uptime_seconds
+    update_interval: 60s
+    entity_category: diagnostic
+    on_raw_value:
+      then:
+        - text_sensor.template.publish:
+            id: wt32_uptime
+            state: !lambda |-
+              int seconds = round(id(wt32_uptime_seconds).raw_state);
+              int days = seconds / (24 * 3600);
+              seconds = seconds % (24 * 3600);
+              int hours = seconds / 3600;
+              seconds = seconds % 3600;
+              int minutes = seconds /  60;
+              return (
+                (days ? to_string(days) + "d " : "") +
+                (hours ? to_string(hours) + "h " : "") +
+                (to_string(minutes) + "m")
+              ).c_str();
+
+text_sensor:
+  - platform: template
+    name: Uptime
+    id: wt32_uptime
+    entity_category: diagnostic
+    icon: mdi:clock-start
+  - platform: template
+    name: 'IP Address'
+    id: ip_address
+    entity_category: diagnostic
+    icon: 'mdi:ip-network'
+    lambda: |-
+      return id(eth).get_ip_addresses().empty() ? "Unset" : id(eth).get_ip_addresses()[0].str();
+    update_interval: 60s
+
+script:
+  - id: screensaver_script
+    # screensaver script, turn on screensaver after 30 seconds, restart counter each time when invoked
+    mode: restart
+    then:
+      # set the time after which the screensaver will be activated
+      - delay: 30s
+      - display.page.show: screensaver
+      - component.update: oled_display
+
+esphome:
+  on_boot:
+    priority: 0
+    then:
+      - display.page.show: first_page
+      - component.update: ip_address
+      - component.update: oled_display
+      - script.execute: screensaver_script
+
+binary_sensor:
+  - platform: gpio
+    entity_category: config
+    id: boneIO_button
+    pin:
+      number: GPIO34
+      mode:
+        input: true
+      inverted: true
+    on_press:
+      then:
+        # woke up when on the screensaver, as well do not include the logo page and screensaver in a loop when pushing a button
+        - if:
+            condition:
+              # on the last page go to the first page skipping the screensaver and logo page
+              display.is_displaying_page: last_page
+            then:
+              - display.page.show: first_page
+              - component.update: oled_display
+            else:
+              - if:
+                  condition:
+                    # on the screensaver, show the logo for a while and display the first page
+                    display.is_displaying_page: screensaver
+                  then:
+                    - display.page.show: first_page
+                    - component.update: oled_display
+                  else:
+                    # not the last page and screensaver go to the next page
+                    - display.page.show_next: oled_display
+                    - component.update: oled_display
+          # restart screensaver script
+        - script.execute: screensaver_script
+
+display:
+  - platform: ssd1306_i2c
+    id: oled_display
+    model: 'SH1106 128x64'
+    address: 0x3C
+    contrast: 0.5
+    pages:
+      - id: first_page
+        lambda: |-
+          it.rectangle(0, 0, 126, 15);
+          it.printf(64,11, id(size_10), TextAlign::BASELINE_CENTER, "bone IO");
+          it.printf(4, 37, id(size_10), TextAlign::BASELINE_LEFT ,"IP addr:");
+          it.printf(124, 37, id(size_10), TextAlign::BASELINE_RIGHT ,"%s", id(ip_address).state.c_str());
+          it.printf(4, 49, id(size_10), TextAlign::BASELINE_LEFT ,"Uptime:");
+          it.printf(124, 49, id(size_10), TextAlign::BASELINE_RIGHT ,"%s", id(wt32_uptime).state.c_str());
+          it.printf(4, 61, id(size_10), TextAlign::BASELINE_LEFT ,"Temperature:");
+          it.printf(124, 61, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2f°C", id(boneIO_temp).state);
+      # additional pages should be defined between the first and last page
+      - id: last_page
+        lambda: |-
+          it.rectangle(0, 0, 126, 15);
+          it.printf(64,11, id(size_10), TextAlign::BASELINE_CENTER, "bone IO");
+          it.printf(4, 25, id(size_10), TextAlign::BASELINE_LEFT ,"Current:");
+          it.printf(124, 25, id(size_10), TextAlign::BASELINE_RIGHT ,"%.3fA", id(ina_current).state);
+          it.printf(4, 37, id(size_10), TextAlign::BASELINE_LEFT ,"Power:");
+          it.printf(124, 37, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2fW", id(ina_power).state);
+          it.printf(4, 49, id(size_10), TextAlign::BASELINE_LEFT ,"Bus Volt:");
+          it.printf(124, 49, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_bus_voltage).state);
+          it.printf(4, 61, id(size_10), TextAlign::BASELINE_LEFT ,"Shunt Volt:");
+          it.printf(124, 61, id(size_10), TextAlign::BASELINE_RIGHT ,"%.2fV", id(ina_shunt_voltage).state);
+      - id: screensaver
+        lambda: |-
+          it.fill(COLOR_OFF);
+
+font:
+  - file: 'gfonts://Ubuntu'
+    id: size_10
+    size: 10
--- a/devices_v0_9/i2c.yaml
+++ b/devices_v0_9/i2c.yaml
@@ -0,0 +1,6 @@
+i2c:
+  - id: i2c_bus
+    sda: GPIO16
+    scl: GPIO33
+    scan: True
+    frequency: 400kHz
Author	SHA1	Message	Date
pszafer	40bd165cf6	v1.4.0	2024-10-07 14:40:06 +02:00
Pawel	3c9548291e	Merge pull request #17 from wedr0wycz/main Corrected pcf inputs ids	2024-10-07 12:35:19 +02:00
Pawel	5f88f5030f	Merge branch 'main' into main	2024-10-07 12:35:07 +02:00
Pawel	9e95318de6	Revert to @latest and ref version	2024-10-07 12:33:58 +02:00
pszafer	b47b41298f	fix ina219 devices	2024-10-07 12:21:06 +02:00
pszafer	77d975597e	add v1.3.0 ref	2024-10-07 12:18:04 +02:00
wedr0wycz	3e6e24db28	minor editorial corrections	2024-10-06 14:48:03 +02:00
wedr0wycz	9441de7db3	corrected input id name	2024-10-05 21:11:23 +02:00
wedr0wycz	1b19e7e2a9	corrected id name	2024-10-05 21:05:05 +02:00
pszafer	0509f60860	add 8x10A	2024-10-04 19:34:32 +02:00
pszafer	9df077dc8c	change phy addr in v0.9	2024-09-30 09:07:55 +02:00
pszafer	5ab0ad7794	fix devices_v0_7-v0_9	2024-09-29 14:10:51 +02:00
pszafer	5ad10482c9	Add v0.9 test board	2024-09-29 14:07:25 +02:00
wedr0wycz	56801a916c	Update boneio-32x10_switches_v0_4.yaml	2024-09-23 16:12:34 +02:00
wedr0wycz	fba8511135	Update pcf.yaml	2024-09-23 15:41:05 +02:00
wedr0wycz	324c55b1d3	Merge branch 'boneIO-eu:main' into main	2024-09-20 15:21:39 +02:00
wedr0wycz	b53356ee8e	change id name	2024-09-19 21:25:48 +02:00
Pawel	128ce7d2c5	Merge pull request #16 from wedr0wycz/main New format configuration for 0.4PP	2024-08-20 08:48:32 +02:00
wedr0wycz	24398e5bfd	nowy katalog z konfigami dla wersji 0.4PP	2024-08-18 00:26:31 +02:00
wedr0wycz	a1aefcccf8	Create display.yaml	2024-08-17 22:28:39 +02:00
wedr0wycz	9f0bc09e32	Create pcf.yaml	2024-08-17 22:16:42 +02:00
wedr0wycz	1f484039e7	Update ina219.yaml	2024-08-17 22:04:46 +02:00
wedr0wycz	f92c1d1523	Create ina219.yaml	2024-08-17 22:04:19 +02:00
wedr0wycz	609b2ebe76	Update i2c.yaml	2024-08-17 22:03:23 +02:00
wedr0wycz	118887d7a9	Create i2c.yaml	2024-08-17 22:02:53 +02:00
wedr0wycz	91dd0d9e78	Update boneio-32x10_switches_v0_4.yaml	2024-08-17 21:53:01 +02:00
wedr0wycz	fb3a0c5308	Update boneio-32x10_switches_v0_4.yaml	2024-06-26 09:42:46 +02:00
wedr0wycz	8c4ce848f0	Create boneio-32x10_switches_v0_4.yaml	2024-06-26 09:39:07 +02:00
pszafer	c917caeca2	Compability fix with Esphome 2024.6	2024-06-24 20:28:56 +02:00
pszafer	f0e782c98b	fix cct fw	2024-06-21 11:22:31 +02:00
pszafer	bda1bc7450	Add mosfet board 48	2024-06-12 10:19:16 +02:00
pszafer	ace9718634	change to only esp as serial prefix	2024-05-27 21:31:27 +02:00
pszafer	206a1912f2	add serial_prefix to config	2024-05-27 20:32:25 +02:00
pszafer	8412fb6fe5	Move uart and modbus to main file	2024-05-23 20:11:00 +02:00
pszafer	1befa8554a	Switch dashboard import to latest branch	2024-05-22 19:37:04 +02:00
pszafer	3741466e05	fix fw	2024-05-22 17:03:31 +02:00
pszafer	501155c99e	fix ina L power	2024-05-22 16:59:20 +02:00